similar to: Passing DTMF

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

I have a block of DID's that I ported to Vitelity about 7 days ago. The problem is if a POTS caller dials into the system, his dtmf is not heard at READ() or Background() while a prompt is played. After the prompt is finished, then dtmf is heard. I've been working with their support, but it still not resolved. SIP callers are not effected. Yesterday, I purchased a DID from

We are developing an IVR application and when I am testing locally on my machine using a softphone (iaxcomm) the digits I press for GET DATA work every time. I am testing with a local extension that goes right into my routine. However when I try to call in to the system using an analog or cell phone GET DATA drops some digits that are pressed. There doesn't seem to be a pattern to which

I'm using the latest asterisk-1.4.26.2 and no zaptel trunks used, all SIP. I have one user that is having problems once he connects to asterisk. He's dialing from his home phone (pstn) to a Vitelity DID (SIP Trunk) which goes to my asterisk IVR. If he presses a dtmf during any message, the press is ignored unless the press was a #, 0 or *. Otherwise, he needs to wait for the

Hi. I have a SIP provider which wants RFC2833 for the dtmfmode, however I would like to increase the duration of the tone, its pretty short and some IVR's are unhappy or don't detect it. I did poke around, but it looks like when RFC2833 is used, it actually generates rtp packets of some sort, so I have no idea how to increase that duration. Any assistance would be appreciated. -- Your

I have a simple dialplan. Using the read cmd, I ask caller for his passcode. If the caller is calling from an plain old analog phone, his dtmf is not heard until the prompt stops playing. SIP phones work correctly. I've trird everything I found searching the net. I've tried all the dtmfmode. I'm using 1.4.26 Currently my vitelity sip account is setup: insecure=very canreinvite=no

Hi again, I am trying to get my DTMF to use RFC 2833 rather then inband, so that I can utilize lower bandwidth codecs through my FXO. After much tinkering I was able to get my gateway (wellgate 3701A) configured to a point where I have some success, but no real joy. I have configured the RTP Payload type (or RFC2833 Payload type) to 101. I don't have a clue what this means, but I took

I have a client who is using a Shoretel PBX. This PBX apparently does not send DTMF information OOB, but instead sends this inband via the B-channel. This is traversing an Asterisk box via a PRI. The user calls the IVR (1-800-CALL-DHL), receives audio, but is not able to present DTMF to engage the IVR. With some light research it appears that the DSP is not activating until the call is

Hello: I am experiencing long delays, minutes not seconds, after issuing sip reload or /etc/init.d/asterisk restart commands. When reloading Asterisk, for the first minute or more, sip show registry says there is no such command. When sip show registry begins to provide information, registration can take another 3-4 minutes. Sometimes, timeouts occur as well, and sometimes these timeouts

> -----Original Message----- > From: Andrew Kohlsmith [mailto:akohlsmith-asterisk@benshaw.com] > Is the channel physically being hung up before the * tone is heard? Good question. If it is, Asterisk doesn't detect it -- the PBX doesn't support Kewlstart-style disconnect notification. The sequence I hear on the extension, when I plug in an analog phone, is the click of the

Ok sorry for not being specific. I am having a problem when people outside call in to my number which terminates at VoicePluse then The send IAX to me and I do not get any tones. People press buttons but it just goes to the next dialplan fall through. It happens 60-70% of the time. extentions.conf [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

Help. Why is it that I can call out from my GSBudgetone SIP phone but the audio is "one-way'? Why is it that when I call my asterisk phone number, I get a fast busy?

Hello, all. I've come across a nasty problem just as we are ready to put our first system into production. During our final testing, we were plagued with several "invalid extension" or "password incorrect" messages when we knew the information entered was correct. Upon investigation, we saw that DTMF signals were occasionally but not consistently duplicated. We might

I have a Asterisk server setup and I am able to connect to the server using a soft client 'x-lite' and call and leave a message on my second extension 102. I have setup a Vitelity account and add what I believe to be the correct information to my sip.conf and extension.conf. I would like to setup incoming and outgoing calls with voicemail support. I've searched all over but many of the

I run an automated information retrieval system, using Asterisk. Fairly often the system misses a dialed digit. Our codes are all 4 digits, see lots of logs with: 4199 - OK 530 - Invalid code 330 - Invalid code 5330 - OK As callers experience skipped codes. We're using Broadvoice SIP with inband DTMF (and we've tried every possible setting or option

I've been looking around for a small external sip fxo gateway, sending emails to possible vendors, etc, and can not seem to come up with anything that fits. Suggestions anyone? (No channel bank & T1 card suggestions, please. I've also just completed an eval of the Mediatrix 1204 which does not support the requirements.) The market between two fxo pstn lines (pair of x100p's) and

I have a Vitelity DID which generally works, but calls from a particular caller do not reach it. Vitelity has thus far disavowed any responsibility for working through this problem. I recognize that some action might be required by another provider which is outside Vitelity's control, but it seems that they should at least be trying to help resolve the problem by helping me determine

I have 1.2.12.1 Voicepulse using IAX I get about 30-40% issues with not having the DTMF tones work. I have 3 questions #1. Voicepulse says they are sending them, Is there some setting I can adjust to make sure my end is working? #2. I have set the Dialplan to play a sound "Operator" then go to a SIP phone. I would like it to write Caller ID Time .... to a file I can read and find

After a variety of connectivity problems, my itsp (Unlimitel.ca) blamed the problem on the IAX protocol. They told me that as of Asterisk 1.4 the IAX protocol went downhill and many carriers (like VoicePulse) are discontinuing support for IAX. Is this correct? We are all heading for SIP? Thanks, MD -------------- next part -------------- An HTML attachment was scrubbed... URL: