similar to: Need help registering Cisco 7960 Phones on Asterisk

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

Running those versions of code, my 7960 will not register with Asterisk. The same 7960 is authenticating against another * server on line 2 just fine though - with the same settings in sip.conf. On the failing * server I am just getting 401 unauthorized errors on the console. From the phone's shell I get that t is registering, but not authenticated .1. from show reg. Any ideas would be

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

I know this isn't a specifically asterisk question, but does anyone know how to make the phone NOT use it's old config? I'm trying to get rid of the second line registration crap and it's not working. Aaron

Can you also post information such as: Type of phone (model Number would be idela) How is it conencted, SIP, ZAP, IAX, Channel Bank. Corresponding config files would also help. Help us help you. >>-----Original Message----- >>From: asterisk-users-bounces@lists.digium.com >>[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of >>Paul A Brown >>Sent:

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

I did a quick google search of the lists site and couldn't find a definitive answer, so if it's there, I apologize for asking again. Starting about noon yesterday, I am no longer able to send/receive calls via Broadvoice. When calling in, I get a fast busy, and when calling out I get the following error: -- Executing Dial("SIP/112-572a",

I have Asterisk version 1.0-RC1 running on Debian Woody. I have 1 analog phone working, 2 inbound lines working, X-Lite is working. The problem that I am having is with Cisco 7960 with SIP version 7.2 software. I can make outbound calls and they work fine, I even get a notice that I have voice mail on the phone and it seems to register properly but I can seem to dial to the phone.

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest

Folks, I have CISCO 7940g phone. I have in the past configured the phone with two lines. Having found the 2nd line wasn't much use, I want to remove it from the config. I have taken it out of the SIP config file that is TFTPd to the phone but it is still showing on the phone and it is still trying to log into Asterisk with that account. I have tried removing the config line and blanking

ala cisco 7960 -----Original Message----- From: Matt Schulte Sent: Thursday, December 16, 2004 10:34 AM To: 'Paul A Brown' Subject: RE: [Asterisk-Users] Cisco 7960 (SIP) hold problems Sure thing, the biggest problem I had was getting the SIP filenames working correctly for updating the firmware (blah, I love Cisco but these phones are a joke for support). This works for me! Good luck.

I have been trying to get multiple lines on the 7960 to work for several days. i have read all the posts I can find and have run multiple "sip debug" and have gotten no place on this. Here are the relevant section of the config files: sip.conf [scott] type=friend host=dynamic username=scott secret=scott context=default mailbox=6101 callerid=Scott Henderson [scott1] type=friend