similar to: Snom 300 vs Grandstream gxp

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Anyone used the new Grandstream GXP-21XX series phones. We have been testing these phones and like what we see. We are looking for a greater cross section of testing before we roll them to production. Any feed back would be appreciated. We are talking with Grandstream engineering and they are looking for feed back as well. Any input is appreciated. Thanks Bryant -------------- next part

Asterisk 1.0.7 Has anyone got the hint function working, and maybe with the GXP2000. I am testing with 2 GXP2000 phones (firmware 1.0.1.9) at the moment trying to get the LED's to light up. On ext 690, button 1 is setup for ext 691, I did this using both methods 691, and <sip:691@192.168.69.1> On ext 691, button 1 is setup for ext 690, I did this using both methods 690, and

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

I am using 1.4, and have the above device, and it worked really well with monitoring 18 "hints" aka devices. Now, I've moved us to a hotdesking paradigm where the user is the "extension" not the device. IOW if I dial 1234, I will get user 1234 (who happens to log on to device ABC today, and DEF tomorrow). Can I make the GXP monitor user 1234, not extension 1234 ?

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

Hi, Has somebody experiences with the Grandstream GXP2020 / 2000 phones in a business graded installation (with really traffic on .... not 3 calls a day ;-) ) Of course with Asterisk PBX (1.4.1 or 1.4.11 or 1.4 in generall) Thanks! Kind Regards, Erik

Hi People, We use the Grandstream GXP-2000 phones, firmware 1.1.1.14, Asterisk PBX, Slackware Linux 10.2, loaded on a Intel(R) Pentium(R) 4 CPU 2.66GHz Box... The issues that we are experiencing involves our Telephone Operator's/Receptionist whom answer multiple incoming calls... As an example.., when they answer line 1 and Line 2 starts to ring they would ask the person on line 1 to

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

All, I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones. All seems well other than the phones have to be reset up to 5 times per day. It is like they lose thier ip connection or maybe thier SIP connection. Has anyone else experienced this issue? I have the phones set for static IP addresses and that doesnt seem to help either. Any help would be greatly

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Hi all, I have to install 25 IP Phone in some building. I want just basic IP Phones like: Cisco-Linksys SPA922 u$s 146 Grandstream GXP-2000 u$s 105 Snom 300 u$s 119 The most valuables parameters for me are (in importance order from high to low): - Stability (device don't hang in any way) - Voice quality using G729 - Provisioning So what device do

I just purchased a Grandstream gxp-2000, budgetone102 and a HT-386. Browsing to each device by IP address, I can get logged in using admin and I can see the advanced settings, however, if I try to change the settings and clicking the Change button, it just brings me back to ask for the password again.. I can't get into the Status page or any of the Account1-4 pages either. It just keeps

We are doing a medium sized office in NYC with 80 phones. The customer originally requested Polycom 601 phones. The COO also authorized us to purchase 2 Grandstream GXP2000 phones for the mail room. We find these phones much easier to configure and work with asterisk . They support BLF & intercom right out of the box. They can also be centrally managed and provisioned. They also sound great

I have been struggling with this issue for about a year now. There were just too many IP phones to choose from at all sorts of price points and not enough information about any of them. Now I am looking at the situation again and if anything it has gotten worse. There are even more phones and all sorts of opinions. For every person that says phone x is great there is someone else complaining

I just downloaded the zip file from grandstreams website to upgrade my gxp2000 firmware from 1.0.0.3 to the latest but seems there are some files missing on the zip file... Anybody been able to upgrade their firmware? My website shows this files as missing: 201.133.125.152 - - [11/May/2005:16:47:16 -0500] "GET /firmware/ring1.bin HTTP/1.0" 200 12737 "-" "Grandstream