similar to: Asterisk CLI got freezed!!

>Does IAXmodem allows you to receive faxes with any extensions >(auto-detecting incoming faxes). You just let Asterisk do the fax detection for you, and when it hears CNG, send it to the fax extension, and your fax extension would just Dial() one of the IAXmodems (using IAX) >>DRi@b-w-computer.de wrote: >> sure in an small office you can use iaxmodem/hylafax to receive faxes

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

Hello everyone- I recently read the thread entitled "Faxing Success Rate on PRI" which dealt with Asterisk/HylaFax/IAXmodem. I'm successfully using this 'recipe' in a few instances on systems with only a couple of analog lines all the way up to a full PRI worth of Iaxmodems. However, I'm finding that I'll need to scale upwards in the coming months and would like to

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

On Tue, Nov 25, 2014 at 10:21 AM, James Lamanna <jlamanna at gmail.com> wrote: > > On Tue, Nov 25, 2014 at 8:14 AM, Matthew Jordan <mjordan at digium.com> > wrote: > >> On Mon, Nov 24, 2014 at 2:12 PM, James Lamanna <jlamanna at gmail.com> >> wrote: >> > Also, how big does the cache in frame.c grow to? >> > I've recompiled with

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

On Tue, Nov 25, 2014 at 8:14 AM, Matthew Jordan <mjordan at digium.com> wrote: > On Mon, Nov 24, 2014 at 2:12 PM, James Lamanna <jlamanna at gmail.com> wrote: > > Also, how big does the cache in frame.c grow to? > > I've recompiled with MALLOC_DEBUG on that server: > > > > asterisk -rx "memory show summary" > > > > .... > >

Hi fellow Asterisk users! I've got a PRI being used with a bunch of iaxmodems/Hylafax. I currently have each individual channel of the PRI in its own context that rings a specific iaxmodem. However, when a fax is complete on that modem and another call comes into it, the modem is still in a state of 'settling down' from the last call and I'd like to have it ring a different

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Hi: How can I see the communication between hylafax and iaxmodem and the console of them?I only can see the console of asterisk.It shows: 'IAX2/iaxmodem-2 is ringing' when I dial the fax number. and nothing else.I can't receive fax. I installed asterisk 1.4.18 and iaxmodem-1.2.0 and ?hylafax-5.2.9-1.fc9.i386.rpm and these are my main configurations: extensions.conf: [from-pstn] exten

I am testing out hylafax and iaxmodem. Submitting jobs to the hylafax server and having it then dial using iaxmodem is working fine. Hylafax server is talking to my Asterisk box that has a Sangoma A101 in it via iaxmodem via an IAX channel using ulaw. A call coming into a certain test DID comes into the Sangoma A101 then it goes to another box via IAX ulaw that uses the rxfax app to

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk and

I just installed Hylafax with Iaxmodem and I am not getting good results when receiving faxes. I can see that the modem is reporting the following: Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 2400 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 4800 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 7200 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]:

Hi, I'm sending twice the same file using Hylafax's sendfax app. The first time I'm "dialing" a DID attached to the ReceiveFAX application. The second time I'm dialing an internal extension attached to the same ReceiveFAX application : 1. sendfax/hylafax/iaxmodem ----> asterisk ----> dadhi ----> dahdi ----> asterisk ----> spandsp 2.

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

A few weeks ago, I lost my Trixbox that was all set up with Hylafax and IAXmodem. I am trying to set it up for email > procmail > faxmail > iaxmodem > asterisk >sipext > ATA (with attached fax). I have followed all the instructions on creating the IAX extension and configuring the IAXmodem config file. I can see the connection in Asterisk: iax2 show peers Name/Username

good tips ill try that out thanks ps is there a recommended runlevel or 2345 is ok? -----Original Message----- From: Lee Howard [mailto:faxguy@howardsilvan.com] Sent: Monday, January 09, 2006 1:59 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] OT: IAXModem in inittab causes modem to be unres ponsive, running from console it's OK Colin Anderson

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time