similar to: B410p, Ast1.4, France Télecom Numeris Double T0 problem

Hi. I'm running Asterisk server with 10 sip phones, and 2 grouped T0 lines with 10 DDI numbers. My provider is France Telecom and my setup is : - Debian Lenny - Asterisk 1.4 - Linux kernel 2.6.25.17 - mISDN 1.1.8 driver - Sip phones Thomson ST2030 No problem with the SIP . But when reveiving a call on RNIS line (any of the DDI numbers), the associated SIP phone rings indicating _two_

i am using asterisk 1.6.2 with mISDN and a passive AVM Fritz!card on CentOS 5.5. The only thing, i want to do is a call-redirection from an isdn-call to my mobile via sip-account. My extension conf is: general] static=yes writeprotect=no [globals] OUT_PORT=1 [ISDN] exten => 12345,1,Dial(SIP/012346737222 at sipprovider.local) If i call to the msn 12345, the SIP-call is going out, but after

Hi, Since a week ago I am trying to get chan_misdn working with asterisk 1.4.19, using HFC based ISDN card on Linux 2.6.22. My setup is done as detailed on wiki and FAQ. * mISDN and miSDNusers are 1.1.7.2, unpacked, build and installed. After installation and misdn-init, I have this: aragorn:root/pts/1: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) ->

Hi I try to connect my asterisk with a Siemens Hicom pbx. I have a PCI cologne Chip card wich support NT mode. I have compiled mISDN driver, and I use chn_misdn from debian package. The card wotk fine in TE mode but mot in NT mode. for informations : routeur*CLI> misdn show stacks BEGIN STACK_LIST: * Stack Addr: Uid 40200001 Port 1 Type NT Prot. PMP Link DOWN --> bchan: addr 0 channel

Hi all, I'm new in the list, and I have a problem upgrading from asterisk 1.2 to asterisk 1.4: There is a diference from asterisk1.2 to asterisk1.4 in AMI events. When I do a call to a queue (with the same extensions.conf dial plan) with ast1.2 and ast1.4, in ast1.2 apper 3 newcallerid event in ast1.4 apper only 2. It is normal? anyone knows it? what is the reason? I

Hello, Now I'm testing func_odbc and hash. My configurations are: func_odbc.conf [GETNUMBER] dsn=sqlserver ;mode=multirow ;rowlimit=10 readsql=SELECT number,real_number1,real_number2,status FROM ivr.dbo.numbers WHERE number=${SQL_ESC(${ARG1})} extensions.conf exten => s,1,Ringing exten => s,n,Wait(4) exten => s,n,Answer exten => s,n,Set(NUMERIS=37037210602) exten =>

Hi all I have a very strange problem here... I use a hfc-s card with mISDN in NT mode with an ISDN Phone connected. When I make a call, the phone rings two or three times and then misdn runs into a timeout... I don't know where to set that timeout, but it's way to short for the called to pick up the phone. If the destination phone is picked up, then everything is allright and the

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give me a hint ?? misdn debug messages follows: lib: NEW_CR Ind with l3id:80001

Hi, Hi All, I've just delved into the world of asterisk and I'm having a few dtmf issues. Internally, amongst sip phones, dtmf is fine. Externally, if you ring from a GSM mobile, DTMF is fine, however if you ring from a standard phone, DTMF fails to register. I am attempting to use a quad port HFC-4S Beronet Card. I've been searching the web most of the last week and

I'm running a setup with chan_misdn on a austrian PTP-line. When somebody dials in without an extension, he gets a busy signal. I don't see the call at all in asterisk. I *have* set immediate=yes in misdn.conf. And I *do* have an s-extension in my dialplan for the context used by misdn. Calls that provide an extension work fine. Attached is my misdn.conf and a verbose 3, misdn set debug

Hello, I'm working with asterisk 1.6. And I have success using func_odbc with one row query results (SELECT source,destination from cc WHERE ... ): exten => s,1,Ringing exten => s,n,Wait(4) exten => s,n,Answer exten => s,n,Set(ARRAY(NUMBER,REALNUMBER1,REALNUMBER2,STATUSAS)=${ODBC_GETVARIABLES(${NUMERIS})}) exten => s,n,Verbose(1| ${NUMERIS}, ${REALNUMBER1} ${REALNUMBER1},

Hello, After upgrading my kernel to mISDN-1.1.1 while keeping asterisk-1.2.16 I no longer match any extension. Apparently the "dad" is empty. However I can see the number just before it (146472130): P[ 4] I IND :SETUP oad:!?145201798p ?146472130 dad: ?146472130 pid:2 state:none P[ 4] EXPORT_PID: pid:2 Mar 23 09:35:28 WARNING[6725]: chan_misdn.c:4750 chan_misdn_log: Extension can

Hi I have beronet BN8S0 isdn card in my asterisk and , card is working fine, but when I try to dial to special number 118913 ( telephone number information) from polish telecom TPSA, I always geting timeout . Bellow is isdn signaling dump : --> * CallGrp: PickupGrp: --> rxgain:0 txgain:0 --> * dad:118913 tech:mISDN/2-u25 ctx:default --> * Setting Context to from-tpnet -->

Hi, I have written a package that contains many s4 generic functions and associated methods. I am having a lot of trouble getting R to build the help pages for these generic functions without reporting, "missing link(s): ~~fun~~, which means that it cannot find the appropriate function when code in the example section of the help is run. Right? After some playing around I can get it to

hi i've configured a Beronet BN8S0 Card with misdn beronet utility. the card is configured with all lines in TE and P2P mode, and it is connected with the special cable with an ISDN connection. i've turned on debugging to level 4, this is the output from the asterisk cli when i receive a call: P[ 5] MGMT: Short status dinfo 1000001 P[ 5] MGMT: SSTATUS: L1_ACTIVATED P[ 5] handle_frm:

There are usually two directories involved in an install: the source directory and the install directory in R_HOME/library. The INSTALL procedure builds the package (usually in place in Windows, I'm not sure if that's the case in Unix) and installs it into the install directory by copying those files necessary to use it. REMOVE removes the install directory, cleaning up

Hi. I want to handle incoming chan_misdn traffic by asterisk, but I've got message - 'Extension can never match, so disconnecting'. What I'm doing wrong ? How I can pass incoming dialed number (dad) to misdn context (in my case 'dss1_incoming') ? Works unrouted calls (s extension) if I set immediate=yes in misdn.conf, but I want to route calls by dialed number. log

All, I am new to using R and know some basics. I wish to use kriging in R to do the following: given data Y =f(X1,X2,X3,.....,Xn) --1000+ irregular measured data set. I would like to be able to get a single value y given sinle input set (x1,x2,x3,...xn) A google search on this takes me lierally to the same example on involving analysis with soil sampling and I cannot figure out how to

Hi, I have installed Asterisk 1.4 with mISDN with the install-asterisk.tar.gz script from beronet.com. On my system I have two cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to work well with mISDN on my system from a previous installation. Now however, the AVM card works well at first glance, i.e. it "registers" incoming calls and works through the asterisk

I'm trying to set caller ids on outgoing calls. I have a quad BRI B410P card connected to my telephony provider. I know the list of DID numbers the provider assigned to my company. If I don't set the caller id then the callee always sees the same "top-level" number. If I set the caller id to a specific DID number we own, the callee keeps seeing the "top-level" number,