similar to: Alcatel OXE + Asterisk as external IVR

Hello, For a prospective customer, I need to evaluate the cost of an Alcatel OXE IP trunking licence price. The setup would be: PSTN -----<E1>---- Alcatel ----<SIP>----Asterisk ---------- SIP Phones At the moment, only a couple of simultaneous calls are needed between Alcatel PBX and Asterisk but later, this number will grow.

Hello, I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also another * box connected to A4200). These PBXes have function to assign name to extensions and display it on phone. Asterisk box is connected via PRI with euroISDN signalling (also I have tried QSIG). Is it possible to set callerid with name and display it on alcatel digital phones? With command SetCALLERID

Dear R?ers I?m trying to get a summary table using latex and summary in the rms package to no avail. I?m running R 2.10.1, Mac OS X snow leopard and I have the mactex 2009 distribution installed. Any obvious things I?m missing? //M options(digits=3) set.seed(173) sex <- factor(sample(c("m","f"), 500, rep=TRUE)) age <- rnorm(500, 50, 5) treatment <-

Hi, Is Asterisk "fully QSIG-compliant"? I currently have an Alcatel 4400 connected to Asterisk 1.2 and 1.4. Zaptel versions are 1.2.26 and 1.4.11. I am using switchtype=euroisdn and all works fine. However, it seems that Alcatel's latest firmware has dropped support for euroisdn which is really despicable. So now I need to see if I can migrate to QSIG which is supported by

Does anyone have any input into integrating asterisk with a alcatel 4400 PBX. Acording to what i've found is that Alcatel uses R2 for E1 -- regards Vikram (http://www.vicramresearch.com)

Hi, I followed the how-to from http://www.alcatelunleashed.com/viewtopic.php?f=44&t=840 All works fine except for Asterisk->Alcatel calls. Actually, calls from Asterisk to analog extensions on the Alcatel work. However, calls from Aserisk to digital extensions on the Alcatel 4400 do NOT work. I get this error in the Asterisk log: -- Executing Dial("SIP/4053-0823dd48",

Hi, I'm sorry if this is already asked somewhere on the list but I couldn't find it. We have an old PBX system controlled by our Telecom provider. There are analog phones but also digital alcatel phone's connected to it. These are not ip based but legacy digital phone's. Is there a way how we can connect them to our own Asterisk PBX? The old PBX is going to be removed, so it has

Hi, I have a problem with a SIP trunk between Asterisk and central OXE Alcatel, especially sometimes are not received inbound calls with following messages: -- Executing [375 at test:1] AGI("SIP/800-084250f8", "agi://127.0.0.1/test.agi") in new stack -- AGI Script agi://127.0.0.1/test.agi completed, returning 0 == Auto fallthrough, channel

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

I've been looking at Asterisk for a replacement for our phone system and I'm hoping someone can help validate my assumptions. We have 4 analog lines coming into the building. These lines are simple POT lines and we have them in a "hunt group" with Verizon so that when a single phone number is dialed, the first line is rang, if that line is busy it will ring the second line, and

Hi guys, I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with TE110P. Input calls VOIP Proider ---> Asterisk ---> Alcatel Output Calls VOIP Proider <--- Asterisk <--- Alcatel In alcatel phones, users should dial 2 for take a line tone and can dial. At this point start my problems: 1. When users dial 2 on phone (alcatel) they don't received a dial tone,

Hello everybody I have an asterisk with an integration of alcatel pbx, by sip trunk, all calls are fine, but tha calls calls that originate from a analog line, the recipient is not listening, and that if they hear the call originates, the lines are E1 in alcatel pbx. When a asteris user call to analog line the call is ok. Everyone, has been that problem? I change asterisk version 1.4.21 to

Does anybody has experience with the SIP phone of Alcatel the ST280. I can't make a call with this phone. Everytime I make a call I get the error Jun 12 19:38:38 WARNING[1133718080]: chan_sip.c:497 retrans_pkt: Maximum retries exceeded on call 5624@81.124.191.47 for seqno 1 (Response)

Hello everybody, I just buy a X101p clone and i'm new in asterisk. Here is my configuration : ISDN line ---- Alcatel ----PSTN ext 68-----Asterisk with X101p clone ------sip phone ext 200 - 203 ||| ISDN phones ext 60-67 >From sip phone to ext 60-67 it works. 9+extnumber >From sip phone to Land lines it works. 9+0+phone number >From ext

Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into

Hi guys, I need to interconnect an asterisk server (1.4.17) with an alcatel pbx, because i want that an asterisk extension can call an alcatel extension and viceversa. I need to do this throug a NT port (of the digium card) for technical reasons (linked with alcatel hardware). Card installation was fine, but i'm not sure of the configuration i choose. In /etc/misdn-init.conf i put my

Greetings list, I've been asked by someone to help them set up a SIP link between an asterisk system and an Alcatel OmniPCX (v6 software). The asterisk bit's fine, but I know nothing about the Alcatel except that it does apparently allow the setup of SIP trunks. Does anyone have experience with the Alcatel unit? Any obvious pitfalls to watch out for? Any suggestions gratefully

Hello list. I'm going te explain my trouble. I have my asterisk with a TDM400P with 4 FXS channels. Two ports are connected to a Panasonic PBX (it's working fine), and others two ports are connected to an Alcatel 4200 PBX (but it doesn't anwer). I connected to a CO port (where i had a pstn line). When I call to the Alcatel PBX, the asterisk show me in it console that es ringing but

Hello, I have the following problem with HFC card and Alcatel PBX 4400: - I want to connect Alcatel PBX and Asterisk with HFC card (zaphfc driver 1port S0/T0 interface card) - BRI line is configured at PBX to T0 trunk - In asterisk I have loaded zahfc driver in NT mode and also set in zapata.conf NT mode, point-to-multipoint. - I am using cross "isdn" cable to PBX -

Hello, Since upgrading from asterisk 11 to asterisk 13 (I have tested up to the latest 13.16.0 release), we have a problem with attended transfers to an alcatel pbx in which the call being transferred still has music on hold even after the transfer has completed. Is this a known issue? Any new flags that need setting, etc? Thanks Jason -------------- next part -------------- An HTML attachment