similar to: Asterisk and multicast RTP

HI Guys, I am trying to use the RTPPage application on asterisk 1.4 using the Snom 320's?? My goal is to do the paging using a multicast IP address. I tried the app_rtppage.c and i can only do unicast on the snom's and i was unable to do a multicast. https://issues.asterisk.org/view.php?id=11797 http://svnview.digium.com/svn/asterisk?revision=101218&view=revision My dialplan

Hello, is it possible to set an IP address for RTP different than the one used for SIP? I want to use asterisk behind a sip proxy (opensips), but I was thinking if I could avoid having to run rtpproxy on the sip proxy server and let asterisk itself take care of it. So that: Asterisk SIP address : local ip address Asterisk RTP address : global ip address regards, takeshi -------------- next

Hi, Thanks to those who hinted on the SIP/H323/Skinny capabilities of asterisk ... I am starting to like this app! :D Now, I successfully managed to bridge SIP to H323 (i don't have skinny phones here). Just a question: Is it possible to have Asterisk "just" as a signalling proxy? i have a flat test network, and i would like the RTP streams to be sent directly end to end (sip phone

Hello, http://www.voip-info.org/wiki/view/Asterisk+Letting+SIP+clients+connect+directly The link above indicates that it is possible to setup RTP streams to directly flow between endpoints and completely bypass Asterisk. I would like to know if this configuration would work when, a) both endpoints are behind NAT, and/or b) both endpoints don't support same codecs with media flowing

It seems renouveau doesn't cope well with missing GLX extension, unlike e.g. glxgears: rmh at cesc:~/renouveau$ glxgears Xlib: extension "GLX" missing on display ":0.0". Error: couldn't get an RGB, Double-buffered visual rmh at cesc:~/renouveau$ ./renouveau detect_devices: Creating probe window failed. We tried to create a window by using SDL. Our OpenGL tests require

Hi asterisk, openser, ser users. I have to check video support between asterisk, open(ser) and rtpproxy . ASTERISK (b2bua+registrar server) | | | | SER + rtpproxy | | NAT | | sip agents (with video support) Both signalling and media channels are kept in the path of SER+rtpproxy and ASTERISK . I can

You will also need your SIP clients that are behind the same NAT to support ICE (Interactive Connectivty Establishment) if you want calls between them. Xten Eyebeam and Snom phones are the only ones I'm aware of that support it. On 7/5/05, Ricardo Martinez <rmartinez@redvoiss.net> wrote: > And even worst. > There are some kind of NAT that STUN does not work. > You can check

Hi, I need an Asterisk with G729 support. Preference is with Asterisk 1.2(.18), but if not possible, then it can be 1.4. Question is, can I enable G729 for both protocols? do the H323 implementation allow it? I found the codec support for H323 in 1.2.18 very poor ... only got u/a-law to work ... not even GSM. Would the Digium G729 license be good both for SIP and H323? Cesc

Hi, I know it is a bit off-topic, but I'd like to ask the community what is the current most supported way to deal with DTMF? I'm looking for an all-SIP system and I'm mostly interested in the end devices support of the different methods (DTMF in-band audio, DTMF RTP telephony events packets, SIP INFO, ...) Thanks in advance. Cesc -------------- next part -------------- An HTML

Hi, I am familiar with asterisk, though never actually tinkered with one myself ... so i don't know the full extent of its capabilities. I am facing a request to bridge a sip network and an h323 network. I would like to operate the sip with ser as the proxy and some gatekeeper on the h323 side (not required though). Actually, i have a few more points that may make it simpler - i do not need

I have a really simple question about a fairly complex problem: I have a Cisco 7960 behind a NAT. I have an Asterisk server behind a different NAT. I have a SER server (with rtpproxy installed) on a public IP adress. I've opened ports with static NAT to * and the Cisco. Without using SER, I can register the phone to *, I can complete calls, I just can't move audio. Reading the

Hi, I have asterisk 1.2.18. I just took a peak at the command: > show translation and I saw that I can only convert from/to ulaw, ulaw, gsm and slin. No speex, no ilbc ... do I need a license or compile something extra? The G723, 726 and 729 ... I need a license, is that it? one for all of them? or for each? How do I get them to work? not just pass-through ... I need conversion. Thanks a

Thanks in advance for your help. I am running a repeated measures ANOVA in r. The same group undergoes to four different treatment conditions. So, all individuals are treated with treatments A, B, C and D in four different occasions. Once I get a significant ANOVA, I first run a paired samples t-test using the code: t.test(X1,X2,paired=TRUE) #being x1 the punctuation after treatment 1 and x2 the

I have a Debian 8 64-bit machine set up as a server and apt-got the tinc package. I configured tinc as a bridge and everything seems normal except that the tunnel does not forward multicast traffic. I used tcpdump to examine the br0, eth0 and tap interfaces. I could see multicast packets on both br0 and eth0, but there is no such packet present on the tap interface. I don't quite know why

I think I have got * worked out as far as getting users on a small private network talking with each other, but when it comes to the bigger picture about talking between private networks connected by the Internet then I am getting confused about STUN, SER, SIPPROXY, RTPPROXY, etc. Before I start let me make it clear that I am not looking to drop out onto the public telco network anywhere, not at

Hi All, I've been wondering if I can instruct asterisk in the dialplan to engage the Media handling for a particular call or not. I've SIP users behind Kamailio & RTPProxy, and I can make use of sip.conf setting "directmediadeny|directmediapermit" to offload media from asterisk for peer-to-peer calls BUT what if someone wants to record a call or engage some feature-code ?

hi, hs anyone able to make video to work on asterisk? i tried following this: http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeBeam i can see that eyebeam is trying to broadcast a video but the other eyebeam is not receiving it. i tested the same setup but this time using ser with rtpproxy and eyebeam video works fine. any ideas? where do you think should i start

Hello everyone, A month ago I took on an issue on the Asterisk issue tracker (https://issues.asterisk.org/view.php?id=11797) dealing with multicast RTP paging. This is the ability to send audio to phones (the phone must support it) and have it played out the speakerphone. Using multicast RTP is great for this because it does not incur the cost and weight of setting up a potentially short call.

Hi all, Does anyone know of a method of sending a raw G711 stream to an address in Asterisk. For example, an application that takes a argument of a phone and a port. The reason? I have found a method to paging on Zultys ZIP2 and ZIP4x4 handsets. Basically it involves sending a stream of RTP data to port 3771 to multicast address 224.0.0.1. Would it need to involve me writing my

I'm currently working with Asterisk 11.8.1 trying to get Multicast RTP working (it's not) with some Polycom phones, and I'm really trying to determine if Asterisk or the phones are the issue. I THINK it's Asterisk... In extensions.conf I have a simple: "Page(MulticastRTP/basic/x.x.x.x:xxxx) line, and when I dial that extension I get: -- Called