similar to: spandsp not recognized by menuselect on Lenny [SOLVED]

Hello, On my Lenny system, I've got libspandsp.a, libspandsp.la files and so on present in /usr/lib. How could I write a shell script that would read among those files and tell "installed spandsp is version 0.0.4pre12 or version 0.0.6pre3" ? This is something autoconf tools must be able to do but I know how to write any line of code with these tools. While at it, how is Asterisk

Make sure that /usr/local/lib is in your lib path. /etc/ld.conf ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of David C. Nicosia Sent: Sunday, January 08, 2006 5:25 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] spandsp for 1.2.1 - libspandsp.so.0: cannot openshared object file:

I am getting the following error when starting: loader.c:325 __load_resource: libspandsp.so.0: cannot open shared object file: No such file or directory loader.c:499 load_modules: Loading module app_txfax.so failed! When I load app_txfax.so and/or app_txfax.so; if these are commented out, asterisk starts fine. I downloaded the spandsp version from

Guys, when compiling libunicall i have these errors. Any idea? creating libunicall.la (cd .libs && rm -f libunicall.la && ln -s ../libunicall.la libunicall.la) if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT testcall.o -MD -MP -MF ".deps/testcall.Tpo" -c -o testcall.o testcall.c; \ then mv -f ".deps/testcall.Tpo" ".deps/testcall.Po"; else rm -f

oops. sent this last night - I was getting this list on an alias that I didn't send from. Hello, I am attempting to setup spandsp on debian-unstable-2.6.7-recent-HEAD. Gnome requires libtiff3g 3.6.1-1. I downloaded libtiff 3.5.7 and 3.6.0 and was able to install 3.5.7,spandsp, and reinstall asterisk. A newer Makefile.patch was needed, then I switched a few lines in the Makefile (from

Hi, I'm trying to install spandsp from source in a Debian Lenny system. I did : cd /usr/src wget http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.6pre5.tgz tar xvf spandsp-0.0.6pre5.tgz cd spandsp-0.0.6 ./configure make make install When doing this, spandsp warns me that librairies are installed in /usr/local/lib with this message : "Libraries have been installed in:

I was cleaning and working on laptops most of the day. Check my logs, I did plenty of work. -----Original Message----- From: "asterisk-users-request at lists.digium.com" <asterisk-users-request at lists.digium.com> To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com> Sent: 11/29/2008 1:13 PM Subject: asterisk-users Digest, Vol 52, Issue 81

Rxfax answers, makes handshake, and crashes once the page starts to send. It receives a .tif file of 8 bytes. Asterisk dumps core - gdb shows : #0 0x281fd86c in t4_rx_putbit () from /usr/local/lib/libspandsp.so.0 #1 0x281fea3c in fast_putbit () from /usr/local/lib/libspandsp.so.0 #2 0x28208324 in decode_baud () from /usr/local/lib/libspandsp.so.0 #3 0x2820893f in process_baud () from

2009/3/9 James Sneeringer <jsneerin at gmail.com> > On Mon, Mar 9, 2009 at 11:13 AM, Olivier <oza-4h07 at myamail.com> wrote: > > Anyway, whenever I'm typing make menuselect, app-fax is greyed out as in > my > > opinion, spandsp libriaries have not been found. > > > > Maybe, I should have typed something like (as suggested > >

Hello all: In a quest to resolve the last apparent timing problems I am having with SpanDSP I am trying out some PPC hardware, specifically a B&W G3. I am running gentoo-ppc on this system and have compiled spandsp 0.0.2pre6 along with a release version of asterisk. Zaptel device (T100P) is configured and appears to be ready to go. When loading asterisk it crashes out with the following

Steven Hi, I'm unable to compile testcpuid.c with the __x86_64__ architecture (Athlon 64 processor). The messages are: /tmp/ccONleRV.s: Assembly messages: /tmp/ccONleRV.s: Error: suffix or operands invalid for 'pushf' " 'pop' " 'push' " 'popf' Is it safe to ignore this module? When I attempt to start asterisk, libspandsp.so.0 fails to load

Like some others on the list spandsp is segfaulting asterisk when recieving a fax. I'm on debian testing/unstable with freshly checked out asterisk CVS and sandsp. My libtiff version is 3.6.1. Here is the GDB output --- snip ----- Changed from phase 5 to 4 Start rx document - compression 2 Start rx page >>> CFR: 84 HDLC underflow in state 5 Post trainability Changed from phase

I am using CentOS 5.04 as Dom0 using virt-manager I was able to install Debian as DomU when I wanted to configure Network in Debian a lot of errors came I had read some where that network-manager-gnome have issues which recently have been patched in Ubuntu 9.10 any how to be able to install vim-full I executed aptitude install vim-full after some messages it asked me to insert Debian 1 ,DVD which

2009/2/26 Olivier <oza-4h07 at myamail.com> > I must add I tried spandsp0.0.6xxx as a warning message advised me to do so > (using 0.0.4 would be ok for me but current trunk doesn't allow this > anymore, it seems). > > > 2009/2/26 Olivier <oza-4h07 at myamail.com> > > Hi, >> >> With 0.0.6pre3: >> # ./build.sh >> CMake Warning (dev)

I am attempting installation of spandsp on to an Asterisk installation on Linux RH9 the distribution i am using is that are URL http://ftp2.tootai.net - the README for which i have followed verbatim - my only issue on this was the target for the port.h / tif_dir.h / tiffiop.h files in the 'headers' folder of the distribtion i put these in the /usr/include folder based simply on the

Hi, With 0.0.6pre3: # ./build.sh CMake Warning (dev) in CMakeLists.txt: No cmake_minimum_required command is present. A line of code such as cmake_minimum_required(VERSION 2.6) should be added at the top of the file. The version specified may be lower if you wish to support older CMake versions for this project. For more information run "cmake --help-policy CMP0000".

Hello Usersks, foreword: i saw a thread on Asterisk-Users list about this problem, but it seems that there were no solution: http://www.mail-archive.com/asterisk-users at lists.digium.com/msg167757.html Therefore, I relaunch this thread. ------- Here it is: I have the same behavior. 1) I never got installed spandsp before. The version that I have installed is 0.0.4 (strangly labelled 0.0.3 inside

Hi, On Thu, Jan 1, 2015 at 7:09 PM, Recursive <lists at binarus.de> wrote: > 1) Did anybody test T.38 with SPANDSP? If yes, which version of SPANDSP did you use? Mine is 0.0.6 PRE 20. Should I try to upgrade to PRE 21? Or to one of the snapshots? I remember that I was having issues with an older libspandsp library. I simply upgraded to the latest available version which made the issue

Hi Kaws, I may need to add some notes; 1. The default .rpm version of libtiff in RH9 does not seem to contain some functional entries required for libunicall / libmfcr2. Therefore when compiling libunicall "unresolved references....." will happen. To solve this, I needed to recompile libtiff from the tarball. When installing libtiff, the default directories will be under

libspandsp.so.0: cannot open shared object file: No such file or directory Created the symlink: /usr/local/lib# ls -lt lib* lrwxrwxrwx 1 root staff 19 2008-11-28 22:42 libspandsp.so.0 -> libspandsp.so.1.0.0 -rw-r--r-- 1 root staff 1849266 2008-11-13 13:26 libspandsp.a -rwxr-xr-x 1 root staff 865 2008-11-13 13:26 libspandsp.la lrwxrwxrwx 1 root staff 19 2008-11-13 13:26