similar to: users.conf and hints

Dear The Expert, I am very new with this, I have installed AsteriskNow, X-Lite as my SoftPhone, I am using SPA-3102. I have 3 extensions, me at 250, 998 is my Linksys SPA-3102 and 999 for PSTN Line (see below) My problem is, I am unable to call 998, I thought this is registration problem, (because the Linksys screen info said Registration Failed) Could any body please help? Many thanks in

Hello, everyone. Today I've installed an asterisk svn trunk (r61667). The problem I'm having is no matter what context I set in the config file for that peer, "default" is always being used. The output of "sip show peers" shows the context correctly, but when I try to make a call, using that peer, I can only dial the numbers set in the "default" context.

Hi, when I'm trying to call the following extension exten => 6002,1,Verbose(1|Extension 6002) exten => 6002,n,Dial(Agent/6002) exten => 6002,n,Hangup() the call is terminated and I get the following warning from asterisk: app_dial.c:1106 dial_exec_full: Unable to create channel of type 'Agent' (cause 17 - User busy) When calling the agent with Dial(SIP/6002) no problem

I recently upgraded from asterisk 1.2.13 to 1.4.2 and am looking at using the users.conf file to setup my users, before i was using real time SIP which worked fine. However when i create a user in users.conf i am unable to register the user form a softphone, however that same softphone can still register a different the users i currently have setup form the sip.conf from real time. i've

Hi, I am attempting to setup an asterisk server, current specs: CentOS release 5 (Final) Asterisk 1.4.11 Asterisk-gui checked out from SVN last week I started with a fairly basic setup involving one VOIP provider who provided one dial in number, and a couple of handsets. Config files are below. It was pretty much totally built by Asterisk-gui, except for the fact I had to add

I have a SIP phone calling via a SIP trunk another asterisk system, that then sends the call out a ZAP channel. When I press any of the features defined in features.conf, The end user on the ZAP side hears the DTMF tones, and none of the features work. My DTMFmode on the SIP users definition is rfc2833 Asterisk console doesn't register that a feature is being recognized, any ideas? Below

i am configured asterisk-gui the "Queue Extension Configuration" but configure and register into queue.conf : [66666] fullname = Call Center strategy = ringall timeout = 5 wrapuptime = 5 autofill = yes autopause = no maxlen = 0 joinempty = no leavewhenempty = no reportholdtime = yes musicclass = default member => Agent/60010 member => Agent/60011 member => Agent/60014 but not

All, I am setting up asterisk on a nslu2 (Linksys) using unslug. Everything is working great except that I have a polycom 301 and I cannot get the message indicator to work. I have created the users and mailbox in users.conf and I can manually dial the mailbox (*986000). Last thing is I am not using config files for the polycom just web browser. Can anyone point me in the right direction I

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

Update on this: I found that by changing insecure = very to insecure = invite, adding the second trunk no longer stopped calls working. I've read the documentation on this switch and still don't see how it applies/is meant to get used. Anyway, with this change in place, the following may help: asterisk*CLI> sip show registry Host Username

Hi, I am trying to setup a simple home voip service w/ * I have compiled and installed the svn source as a first step I am trying to configure SIP for inside my network. I have a handful of softphones and a few hardphones that I want to all be able to call each other I have configured users.conf with a single softphone(kphone) and have tried calling itself (ext 6000) and the demo from the

Hi - I just deployed a system using IMAP Voicemail. During my testing, voicemail worked fine. I could check vm from the phone, and the messages would get marked as read, or I could read the messages in a mail client, and the phone's mwi light would turn off. Very neat. I'm not exactly sure when things got munged up, but something broke. I can record messages with Voicemail(), but now

Hi, I have some problems and doubts connecting two asterisk servers. I have one asterisk (serverA), with 1 sip client registered (clientA). I have another asterisk (sever B), with another client (clientB). Now I want to call from client A to B and from B to A. Searching in google i find many configuration examples. For instance:

What is this error ? is this harmful ? *CLI>*CLI> dahdi restart [Mar 23 14:01:06] WARNING[4314]: chan_dahdi.c:17422 process_dahdi: Ignoring any changes to 'userbase' (on reload) at line 23. [Mar 23 14:01:06] WARNING[4314]: chan_dahdi.c:17422 process_dahdi: Ignoring any changes to 'vmsecret' (on reload) at line 31. [Mar 23 14:01:06] WARNING[4314]: chan_dahdi.c:17422

Hi, Anybody seen this before? (using a pre-compiled asterisk from the OBS on a sles11sp1) (I mean, i did the same with a 1.6 without any problem, but i need 1.8) after starting: kc3004:~ # /usr/sbin/safe_asterisk: line 145: 16133 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} > /dev/${TTY} 2>&1 < /dev/${TTY} Asterisk ended with

Group I'm having trouble getting hints to work correctly using SVN-branch-1.4-r59289 I have hints working on several other systems but I must be missing something this time around. VoIPGW*CLI> show hints -= Registered Asterisk Dial Plan Hints =- 30@default : State:Unavailable Watchers 3 29@default :

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Hi, I've just built my first asterisk server. Current information: OS Version: Linux asterisk.visinet.com.au 2.6.18-8.1.8.el5 #1 SMP Tue Jul 10 06:50:22 EDT 2007 i686 i686 i386 GNU/Linux Asterisk Build: Asterisk 1.4.11 Asterisk GUI-version Revision: 1479 $ Server Date & TimeZone: Thu Sep 6 02:37:11 EST 2007 I've used the Asterisk GUI for setup with two IP

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")