similar to: asterisk video

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

Hi All, Got some problem with asterisk video, i'm testing an eyebeam and a grandstream video phone. call from grandstream to eyebeam works ok, video shows up. but calls from eyebeam to grandstream there's no video, but audio is ok. Regards, Nhadie

Hi All First time poster, long time reader. I just ran into something really bizarre. I've enabled videosupport and have been testing sip calls with Xten Eyebeam software, it works (mostly) However, when I have Videosupport=yes In the [general] section of my sip.conf, broadvoice calls fail w/ "We're sorry your call cannot be completed at this time" So... I've

I have three video phones here for testing: Extension 6003 is Eyebeam Extension 6004 is a hard phone (model 8770) Extension 6005 is a hard phone (model 8882) Can anybody have a look at my settings and the output I get from all kinds of dialings, please. The sip settings for all phones is (user / password different): [6003] type=friend username=6003 secret=pwd qualify=200 nat=yes host=dynamic

Hi all, I would like to connect in sip mode an Eyebeam client to a messenger via Asterisk. I want to use video. Nat is not an issue as vpn connections will be used. Is this a difficult tasks, can someone give me some pointers to get started... Have a good week-end, Francois Random Thought: --------------- Wanna buy a duck?

Guys. Im writing this because Ive checked the wiki, Xten website and read a lot of docs and still cant figure out a way around the NAT issues. Maybe somebody else can give me some ideas from a fresh perpective. My test setup is this: Asterisk -> 2wire homeportal Firewall -> internet Computer with Xten eyebeam The asterisk box and the computer with xten beam are behind the same

I am looking for a SIP Soft Video phone, which I can use with Asterisk. If you have one installed (regardless if free or purchased) please tell me which one, the settings in Asterisk and your experience with it. bye Ronald

Hello Everyone I just bough my Xten Eyebeam but i don figure out how to make the video works i only see a black screen where de remote video suposse to appear, Any help regarding this matter will be very preciated Thank You

Sorry if you see this message repeated twice. I would like to set up hard phones and softphones with the same extension so that when anybody in the company dials an extension, each user's hardphone and softphone will ring at the same time. I've tried setting this up before, but I noticed that the last sip device to register with the same extension is the only one that rings when the

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

Hello everyone, I have previously asked this question on the asterisk-video list, but I got directed here. I have a setup consisting of asterisknow beta4 (not sure if that is crucial) and a few clients all running X-Lite 3.0 (not eyebeam) on the local network. My computer has a USB-Camera installed, and now I would like to do some video calling with it, at least, so that the other user can

Hi all I was tryed to connect to mysip.ch scs_client by siemens that isn't works well. Does anyones knows to work H/W or S/W applictations in asterisk SIP videosupport? Regards mack_jpn

You will also need your SIP clients that are behind the same NAT to support ICE (Interactive Connectivty Establishment) if you want calls between them. Xten Eyebeam and Snom phones are the only ones I'm aware of that support it. On 7/5/05, Ricardo Martinez <rmartinez@redvoiss.net> wrote: > And even worst. > There are some kind of NAT that STUN does not work. > You can check

Hi asterisk, openser, ser users. I have to check video support between asterisk, open(ser) and rtpproxy . ASTERISK (b2bua+registrar server) | | | | SER + rtpproxy | | NAT | | sip agents (with video support) Both signalling and media channels are kept in the path of SER+rtpproxy and ASTERISK . I can

My suggestion would be the one-line eyeBeam phone under development. Check out support.xten.com. //Jan -----Ursprungligt meddelande----- Fr?n: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] F?r afoc@interconnessioni.it Skickat: den 18 oktober 2005 14:48 Till: Asterisk Users Mailing List - Non-Commercial Discussion ?mne: Re: SV: [Asterisk-Users] Queues

--- listas iPfone <listas@ipfone.com.br> wrote: > Hi all > > I need to know if the video support for h.263 is > active in version stable > 1.0.7 to use with eyeBeam in asterisk it works for me... [2222] type=friend secret=xxxx auth=md5 callerid="myCallerId" <2222> canreinvite=no host=dynamic disallow=all context=default allow=alaw allow=ulaw allow=speex

-----Original Message----- From: Ferguson, Michael Sent: Tuesday, February 01, 2005 11:35 AM To: 'asterisk-users@lists.digium.com' Subject: Messaging with * and eyeBeam G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's

Hi, Is it possible to use realtime for Music On Hold? Is it also possible to store the music/audio files on the database, same way a voicemail can be stored on the database? Thank You Regards, Nhadie

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

Hi, Anyone knows a DID provider that can do both outbound and inbound? Regards Nhadie