similar to: How to remove dialtone from DISA?

Hi everybody, I am having DTMF detection problem on DISA with my callback system. For many users, it keeps playing the dialtone even after they have input their number. I have trunk setup to both g729 and ulaw. What could be the reason for this problem. Some users have to dial a few times before the system can recognize their dialed number. -- Zeeshan A Zakaria -------------- next part

Hi, These days I run into something quite odd. I have an A@H that was modified to meet our requirements. We have a completely funtional DISA which we use pretty much all the time. I works flawlessly with incomming SIP calls from several providers, IAX calls from FWD and with ZAP. Recently we came out with a situation where it doesn't work... with a

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

Jeez, I need to work out the shortcut to send an email which I keep pressing by accident!! -----Original Message----- From: C. Tomlinson [mailto:asterisk_list@burntwires.com] Sent: 27 February 2005 22:48 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] DISA and a long delay; ideas? Many thanks, that was the problem. I didn't paste the

I'd like to write a snippet of dialtone that plays dialtone and collects a specific number of digits into a variable. Sort of like READ but with a generated dialtone. Naturally, I want the dialtone to stop playing after the first digit. I can't find this anywhere. Only thing I can think of is a no-password DISA. Is this the correct method? Is there a better one? </edg>

We are using DISA with local SIP users. The user enters in a 2 digit code then they get a dialtone and the phone dials out. The problem is that the calls waits 10 seconds after the outgoing number is dialed, no matter what I put for the timeout values. Anyone else using DISA that has run into this? exten => _2X,1,Answer exten => _2X,2,DigitTimeout(2) exten =>

Hi Folks, I'm trying to test out Asterisk overall. I'm having some problems with DTMF. Currently I'm playing with DISA, but I'm worried this will happen when I get to implementing AAs etc. I have a free SIP trunk from IPKall that I'm trying to make work. I'm able to receive calls, and I've now setup and extension with DISA and a password. I connect ok from the

Is there any known reason that the DISA() routine should behave differently than WaitExten() as far as recognizing DTMF tones? If not, I suspect there's a bug here. Try it yourself--two DID's on our PRI, numbers below let you test each routine: It is my observation that some setups/phones DO and some DO NOT express this variance. --I could not show any variance on a sprint mobile phone

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

I can dial from an asterisk host to another one via FreeWorldDialup, on the other side DISA service answer to me and i can ear dialtone. But i cannot send DTMF and dial an extension on the DISA enabled asterisk.....i've tried rfc2833 and inband...but nothing....any tips ??? Thanks, -- Igor Barsanti GPG Public key available at http://pgp.mit.edu

Hi, I have just setup a DISA setup whereby people can dial in, authenticate, are given a dialtone and can then call out. Everything works however there is a 10 second delay after the user enters the number and presses #, until the system does anything. Here is the relevant section from my extensions.conf: -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi ! Did anyone had issues/managed to solve issues with DISA over Zap channels on * 1.0.X (STABLE) ? I have a situatuion where DTMFs that should be recognized in DISA work over SIP channels and do not work over ZAP channels (Zap channels are on TE110P) I have in default context: exten=> 299,1,DISA(no-password|default) and I have SIP extension 200 in [default] and I have Zap trunk which

[moved from -dev, as the thread is better suited for -users] At 5:10 PM -0600 1/30/04, James Sharp wrote: > > I've pretty much got the routing covered at this point, I'm just not sure >> how to get the Asterisk system to answer and give me dialtone immediately. >> Any ideas or recommendations would be greatly appreciated. > >app_disa will give answer and give

Hi everybody, How can we add new contexts in asterisk realtime module? All I could figure out after googling is that a new context HAS to be declared in extensions.conf with 'switch => Realtime/@<databasetable>' under the context name declaration. This works fine as long as we are adding extensions only to this one context, but doesn't give the freedom to add new contexts for

For a while now I've been looking for a good web based soft phone solution, but so far no luck. A few solutions which I've tried, both Java based and Flash based, either don't work, or had bad sound quality. I need something which I could put on my productions server for my clients. Seems like good web based solutions are all paid ones, nobody is giving it for free. Any ideas,

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm

sorry for typo mistake in my last post. as from my orignal post two registration of the same user are as follows SIP/XYZ at 119.68.0.90:5060 SIP/XYZ at 202.16.34.10:5678 so dial command with unique-id i want to use will be Dial(SIP/XYZ at 192.168.0.20:5062-096afee8,30,rtT) Dial(SIP/XYZ at 192.168.0.12:64290-0966ab80,30,rtT) and not Dial(SIP/192.168.0.20:5062-096afee8,30,rtT)

Hi there, i have a Problem with dialtone and a TE401P Card. I swear I surfed the wiki, the mailing list and google for 4 hours and did not find the solution, can you help me ? In Germany I have an E1-Line and an Alcatel 4200 PRO PBX. Without using asterisk I dial the "0" on an Alcatel Phone and have the local exchange dialtone, then I can dial. Most users do not dial en block, they

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Greetings everyone, I've been trying to make this java based webphone work for everybody visiting my website, but seems like for many users it doesn't work. In order to get a better idea what is the success rate of this webphone, I would appreciate help from anybody who could make a few calls from it within North America and if it doesn't work, send me what error you get, or if it