similar to: Session Progress

Hi all, I have the below extension defined under sip.conf: [2203] type=friend username=2203 secret=123456 host=192.168.0.164 mailbox=2203 context=intern canreinvite=yes dtmfmode=rfc2833 When trying to register from a softphone installed on a PC behind a nat with IP=192.168.0.164, I got 503 FOrbidden...Does anyone have any idea about what could be the issue? Regards -------------- next part

Hi, I have a Asterisk that connects to the PSTN via a PRI. After Asterisk sends the setup message it immediately sends a 183 Session Progress. Is there a way I can change it so that it sends a 100 Trying instead? Because I am having some issues with a equipment where it does not play a busy tone as a result of sending a 183 Session Progress then the 486 Busy. Thanks Remi

I upgraded my server from Fedora Core 4 to Fedora Core 5. I was wondering if anybody else has run into the problem and know's the fix? I recompiled asterisk and if I don't have the /usr/lib/asterisk/modules/codec_g729a.so file in place it works. I use or used to use the licensed G729 Codec from Digium. This is the error message from asterisk -vvg: [app_playback.so] => (Sound File

Hi, I`m not actually asking for a comparaison between the two, I have one on hand and will make up my own mind. But I can't find much info on whether the Snom (370 to be exact) accepts FTP provisioning like the Polycom (but few others) do. Any Snom user can answer this one for me? Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have a small LAN network where I am running a Jain-Sip softphone on two user pc's. These softphones are connected through Asterisk(Trixbox). Although the phones do work in providing an audio conversation, there is a long delay(about 20 seconds) in the initial RTP session setup. I have tried a few values for the buffer length including setting it to zero. I assumed this would

Dear All, I have the following CPU info on my asterisk server: Linux switch1.domain.net 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 i686 i386 GNU/Linux I need to install G729 on the asterisk server just to pass through and not for encoding...Which G729 package do you advice me to install? I tried several packages with no luck Regards -------------- next part -------------- An

Hi everybody, I'm new to this matter and I spent three days in trying to connect one SIP Softphone to an Asterisk Box. I always get error 401 or 403... I don't understand very well settings in Softphone program: con anybody show me how to set up a minimal running system with no public lines or external Proxies? Thank you for your kind help... Ciao Mauro

Chris Abel writes: >Hello everyone! > >I've had this problem for a while and cant figure it out. When an outside >caller calls an extension on my asterisk system, they do not hear any >sort of ringing. Inside extensions calling other extensions do hear >ringing. We have 3 other asterisk systems that are configured the same >way, but do not have this problem. We think it

Hello, We are working on implementing a solution for a medium service provider. They were previously using a Cisco AS5300 gateway with some PRI trunks to receive modem calls, then route them out the Internet. The Telco they were buying the trunks to discovered this configuration and restricted them due to legal conventions, and stated that in order to continue doing this, they would have to talk

Hi All, We have a Cisco CME linked to our Asterisk PBX (named 'epstein'). Off said PBX we have numerous other PBX's, some IAX and some SIP. On a call placed from CME (SIP) to 'epstein' it all works fine except for a few quirks. When calling through epstein to an IAX peer we get '100 trying' followed by '180 ringing' sent back down the SIP leg to CME.

With softphone I mean linphone csipsimple or whatever. How should a dialplan lokks like? On 31.01.19 11:26, Antony Stone wrote: > On Thursday 31 January 2019 at 10:59:01, basti wrote: > >> Hello I use this dial paln: >> >> [o2-in] >> exten => o2,1,Answer >> exten => o2,n,Playback(hello-world) >> exten => o2,n,Ringing >> exten =>

Hello I use this dial paln: [o2-in] exten => o2,1,Answer exten => o2,n,Playback(hello-world) exten => o2,n,Ringing exten => o2,n,Dial(SIP/10&SIP/20&Local/s at no-op,25,rt) exten => o2,n,Playtones(425/1000,0/4000) exten => o2,n,Wait(30) exten => o2,n,Hangup() All is fine. Hello world is Playback and I hear a ring tone. If I remove the Playback hello-world. No ring

On 12.12.18 at 19:43 Joshua C. Colp wrote: > On Wed, Dec 12, 2018, at 12:31 PM, Michael Maier wrote: > > <snip> > >> >> The problem: The extension doesn't create a ringback locally, because >> it most probably expects it to >> be sent by the callee - but the callee doesn't send anything (not >> surprising, because there has been >>

[Resent due to non-descriptive subject line.] Hi folks When connecting two SIP users, is there any way to stop Asterisk from sending SIP 183 Session Progress messages, either globally or per-peer? Scenario as follows: Call from UA1 to Asterisk (UA2) to UA3. UA3 sends RTP before SIP OK to Asterisk (UA2). Asterisk (UA2) detects early audio from UA3 and sends 183 Session Progress with SDP to

Asterisk doesn't seem to be relaying 183, Session Progress SIP messages received from an upstream host back to the phone. Anyone know why? Here's the SIP message that Asterisk receives, and it does nothing with it. It doesn't pass it back to the phone. <-- SIP read from xxx.yyy.142.234:5060: SIP/2.0 183 Session Progress Via: SIP/2.0/UDP

So when someone's brute forcing your server is there a way to identify the originating IPs without using a tcpdump? When I get a failed auth on the console it shows 'account at asteriskserver' then tag=as25ca5023 (or some random string, though it's a bit odd as alwaysauthreject = yes is on in sip.conf). Anyway, the logs don't show anything more useful either. Is there

Hey all...I'm trying to use gnophone to connect to my asterisk box behind my firewall..I thought I could just setup a tunnel with something like ssh host.com -L5036:asteriskserver:5036 and just change my gnophone to connect to localhost:5036 but I never see anything happen on the asterisk server. I'm even trying this on the same network just in case there is something funky with NAT.

Dear Asterisk community! I am having trouble with a project concerning the 183 Session Progress SIP messages. Asterisk seems to only accept these when there is also a Session Description (SDP) included in the message. I also verified this by looking at the code. However for a project we are working with a trunk to a third party system (Alcatel) and they are insisting that this behavior is

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

Yes, this means the remote end was not sending any audio stream. But it shouldn't. According to [1] before remote end send OK or ACK there is one way SDP, no any audio stream. PJSIP channel (option rtp_timeout) does not take this one. Isn't it a mistake? What could be workarounds? 19.12.2016 11:33, Jean Aunis ?????: > > This means the remote end was not sending any audio stream,