similar to: Trouble with faxing using iaxmodem / hylafax

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hello, we have an asterisk (1.4.21.2) with ZAP and mISDN channels, the mISDN are 2 incoming GSM Modems, each with 2 simcards. No, the mISDN line one and two are fine, but when I get a call on line 3 something with the time is wrong. Timeconditions fall through to off-hours even if the time of the call is clearly inside business hours, here a log excerpt: [Aug 26 11:04:36] VERBOSE[3112]

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

I'm just wondering here, in our community... Why not HylaFax for Fax solutions? I'm not saying bad about the big efforts on app_tx and app_rx with spandsp. But as me and many other asterisk users, we find out that Hylafax+IAXModem+Asterisk is very reliable. And from what i've been testing and reading, Hylafax is an extremely powerful: "HylaFAX is an enterprise-class system for

Hello. We are running Asterisk 1.2.23 iaxmodem-0.2.1 and hylafax-4.3.3 When we send faxes the people who receive the faxes complain that they look wrinkled or smashed up. Sometimes they are missing random lines. Has anyone seen this happen, or know how to fix it?

In trying to get the asterisk and faxing working I had to resolve to using iaxmodem and hylafax. I have incoming working, but outgoing the other fax rings but it would appear from web searches that the fax signals are too low to be "heard" I can read about rxgain and txgain for zapata. my fax setup goes direct from aterisk <-SIP-> SIP Provider <- Fax Machine -> It never

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hello all, I have an asterisk box running in a customer with Hylafax, iaxmodem, asterisk 1.2.18. The service can receive faxes, from a lot of fax machines, but there are a couple of them that asterisk Hylafax cannot complete. This calls arrive the asterisk box, asterisk detect that this calls are fax, asterisk answer the call, and then Hangup the call. But hylafax do not receive nothing. When

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

Hi, I have problems with asterisk and hylafax+ iaxmodem. I can successfully send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have problems: No carrier. This is hylafax log, maybe you can suggest me where to find ... Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906 Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 Oct 17 07:38:48.22: [22428]: SEND

Hi Guys Just wondering if you can help me and give me some pointers on what could be wrong in my setup. Everything seems to be installed. I have Asterisk 1.2.12.1 FreePBX 1.2.3 IAXModem 0.1.15 Chan_capi 0.7.0 The IAXmodem registers, faxgetty is starting in /var/log/messages but it just doesn't seem to pickup the call. In Chan_capi it says fax detected but no fax

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

Hi, I've tired to forward a Fax from Asterisk to Hylafax. It works so far until I tried with a Fax machine. I just got error shown in the log below. I'm not sure why. I've tested it with other 6 machines and they all work fine. Do you have any idea why? Pim Hylafax Session log: Apr 12 11:16:48.82: [ 5933]: SESSION BEGIN 000000078 492212601860 Apr 12 11:16:48.82: [ 5933]:

Arch = x86_64 OS = CentOS-6.3 (FreePBX) Asterisk = 11.3.0 (FreePBX) Hylafax+ = 5.5.3 (epel) I am installing an Asterisk server with the intent of having it act as our fax server. The Asterisk system was installed using the current FreePBX distro which is reputedly based on CentOS-6.3. I have installed Hylafax+ from epel and I have built and packaged IAXModem-1.2.0 for CentOS-6 using mock and

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

I made a little write-up that attempts to synthesise a lot of the information out there about how to get HylaFAX working with Asterisk by way of IAXmodem for inbound faxing: http://blog.evaristesys.com/?p=24 Of course, there are bound to be some things I've left out or are grossly in need of correction. So, before I link it off the voip-wiki I am extremely eager to solicit the input of

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk