similar to: chan_zap.c:4747 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1

HI I have two servers both of which get this message on one of the lines. Ring/Off-hook in strange state 6. The one server seems to be ok with it, but the other one when an extension picks up there is no one there and the incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like someone had suggested, but it didn't do anything. I also upgraded zaptel to the latest. 1.2.18 and

Calling from PSTN let extension 601 ring twice, hang up and starts over again to ring twice, ... If I pickup I do not hear on extension 601, and on the PSTN it is still signaling to ring. Can anybody enlighten me, please? extension.conf [incoming_88097074] exten => s,1,Wait(1) ;wait to get caller ID in. exten => s,2,Dial(SIP/102,20) exten => s,3,Voicemail(u102) exten =>

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Hello Eric, call progress detection is the problem. Asterisk mistakenly recognizes the call to be answered and then still "hears" the ringing that should not be there if the line was really up. To solve the problem you would have to either implement a progress detection matching your country's indication tones or at least adjust the existing one for US or Costa Rica in dsp.c. By

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

Hi all, I have hit a wall configuring a TDM400, I have set these up before without issue but today I just can't seem to figure out what I am doing wrong. On an incoming call the following is produced in the Asterisk console with verbose 4 -- Starting simple switch on 'Zap/2-1' Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring Begin)... Mar 22

Calling out on PSTN over a TDM400P seems to generate a Red Alarm - whatever that is. I have another extension on the PSTN, and I can dial out over that. zttool shows no alarms. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM400P REV I Board 1 OK 0 0 0 CAS Unk YEL 0 db

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

Hi all, I must admit that I am stuck. I have a TDM400P card with two FXS and two FXO modules which I had set up and configured so that it was working beautifully. The only problem was that occasionally it would get itself into a state where outgoing calls would simply be met with a very loud static. A reboot would fix this issue and everything would work fine for a while. Recently however,

All of a sudden I am getting the following warning "Ring/off-hook in strange state 6 on channel1" from chan_zap.c and I cannot answer calls. I can place calls out without a problem though. Any ideas what can be the problem. I have checked zapata.conf and zaptel.conf and they both seem fine. Thanks in advance. Dan -------------- next part -------------- An HTML attachment was

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

Hi All, For the most part, the PBX works as it should. Occasionally people complain that they call and the PBX doesn't pick up. Other times it looks like the call is answered by Asterisk but I still hear ringing and I start listening to the IVR menu a few seconds into it. As for Asterisk not picking up, I see the following in the logs: [Mar 27 13:32:29] NOTICE[13197]: chan_zap.c:7071

I have an issue getting any incomming calls When the phone rings something picks up and gives it a fast busy. There is no one using Zap/2 it does the same thing with voicemail and voicemail 2 you can see the console output below, I would love any help anyone could shead on this issue, Michael NOTICE[1192484144]: File chan_zap.c, Line 4270 (ss_thread): Got event 2 (Ring/Answered)... --

Scenario, I got some very good help earlier from Joseph getting me up and started but I have a couple of small problems still. Setup: FC2 Asterisk 1.0 Zaptel 1.0, TMP400P, FXS Port 1 FXO Port 4 Analog dialout line and Analog handset plugged in. Problems: 1. Incoming calls work and the phone rings and can be answered no problems, (although I wouldn't mind being able to adjust the ring but

Well, I got my nice new 4 port FXS card this afternoon, and with all my other asterisk problems, decided now was a good time to throw it in.... So far, I have dropped it in, done a clean cvs checkout on zapata, zaptel, asterisk, make clean and make install on each. I can load the wcfxs module which finds the card (though one time it failed the register check and locked the machine up, a hard

Seems to have struck a small problem.. Using a t100p & Zhone channel bank.... one extension ringing another.....the following will appear WARNING[18448]: File chan_zap.c, Line 2685 (zt_handle_event): Didn't finish Caller-ID spill. Cancelling. if we are using defaultzone=au change it to us and the problem goes away..... any possible solutions ?? Gary .

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

I have an Asterisk server running todays CVS (updated it just in case that was the problem). It has 3 X100P cards. The first two lines I use as my normal work lines and the third is my fax line which I use with SpanDSP. I run Fedora Core 4. I have a problem that the third X100P does not answer the call. From the console I can see that there is an incoming call with the following: --

Using asterisk 1.4.18 and zaptel 1.4.9 on x86_64, I am having trouble dialing out to the pstn. The call is initiated at Zap/1-1 and should exit via Zap/3. I get the following: -- Starting simple switch on 'Zap/1-1' -- Executing [2111 at internal:1] Dial("Zap/1-1", "Zap/3/8801234") in new stack [Feb 25 02:36:59] DEBUG[7194]: chan_zap.c:1954 zt_call: Dialing