similar to: busydetect=yes, busycount=5: hangup automtically without reason, why?

Hello, I've commited the new busydetect routine to CVS. You need to cvs update asterisk of course and then choose it in asterisk/Makefile and recompile asterisk. All you X100P users that had the problems with false hangups or the card not being able to detect the busy tone please check that. In the asterisk/Makefile you need to find a line BUSYDETECT = and uncomment what you want/ comment

Hi All, This isn't really a question, but it's an issue I experienced that was driving me crazy for a few days, so I thought it might be good for the archives. Basically what was happening was everytime a particular customer called (long distance), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still

Hi guys. I have a XP100P Clone , and the busydetect dont work for me.. PSTN---Asterisk---Sip---Asterisk----PBX Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work... Please Help me. Zapata.conf [channels] echocancel=yes usecallerid=no hidecallerid=no rxgain=0.0 txgain=0.0 signalling=fxs_ks callprogress=no context=entrada channel=>1

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

Hi, Mark. I'm posting a little patch that permits to set the busycount value in dsp (via chan_zap), for systems that have "busydetect=yes" in zapata.conf and have noticed sporadic hangup, caused by incorrect cadence detection during normal conversation. With this patch, it's possible to increase the busycount from 3 (default) to 5 (max, because DSP_HISTORY=5), simply adding a

Thanks for your suggestion Steve. I have done as you advised and set busypattern=300,200 to match the sample I recorded. This hasn't worked though, asterisk doesn't seem to detect the busy signal. Does asterisk require a the signal to be in a certain power range? The signal I get is very quiet. Thanks for your help Regards Jonathan On Mon, 19 Dec 2005, [ISO-8859-1] Diego Andr?s

Hi ! I have some issues, i don't know exactly if it's a busy detection issue. When i dial into the Asterisk box, and if i hang up before the Asterisk answers with the IVR Welcome message, the Asterisk goes on with the call. But, if i wait for the Asterisk to answer, and if i hang up, the Asterisk hangs up too. I have this parameters on zapata.conf: busydetect=no

install asterisk with x100p clone; the problem is that call me and hangup but the interface zap not detect the hangup and the line open. the error is : The 'reload' command is deprecated and will be removed in a future release. Please use 'module reload' instead. -- Reloading module 'chan_zap.so' (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf':

simple setup... two * boxen, X100P in each pots(1) --> ZAP/1 --> *(1) --> IAX2 --> *(2) --> ZAP/1 --> pots(2) with busydetect=yes and callprogress=yes in zapata.conf, calling from pots(1) through to pots(2) we get the following -- Zap/1-1 is ringing -- Zap/1-1 is ringing etc, and if nobody picks up, then it timeouts and hangups, good however, if during the ringing,

My telco doesn't provide Disconnect Supervision or Polarity Change. So I figured I have to detect hangups with busydetect=yes in zapata.conf. I tested it. When the telco sends a busy tone * detects it and hangsup. So far so good. The problem is the telco doesn't always send a busy after remote hangup. Most of the time it sends a congestion tone. I am guessing these tones from what I

When a caller hangs up (e.g. after leaving a voicemail), my British Telecom exchange sends a continuous tone for about 15s and then silence. I can't get asterisk to recognise this tone as a hangup indication. I have tried indications.conf with both country=uk and country=us. My zapata.conf has busydetect=yes, callprogress=yes and I've tried setting busycount from 1 through 7 I am using

Hi, Does some one experience the Sangoma A20X-ec series card that cant detect the hangup tone? I got * server 1.2.5 and running on Centos 4.3, I hock up to two PSTN lines and each time some one call in and my phone delay 1-2 sec (this is Asterisk delay nothing to do with Sangoma) and it rings on my phone, however, end on the day I got not less that 10 empty messages. I found out that Sangoma FXO

Hi, I'm struggling to get busydetect to work. I'm using asterisk 1.2.1 and a digium TDM04B (4 port FXO) card. I've set busydetect=yes, busycount=6 and busypattern=300,200 in zapata.conf and i've modified zondata.c with a busy setting of 620+480, 300/200 which is the busysignal received from Korea Telecom. Asterisk isn't detecting the busy signal and doesn't hangup.

Afternoon all, After doing some test on my asterisk box I can successfully receive calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network Dial out from a sip phone is also not an issue, all calls connect and terminate normally. If I call the Asterisk PBX say from PSTN in Zap1-1 and out through ZAP2-2 back to the PSTN (after entering the correct pin off course) the card does not

Hello, I've got the following configuration: 2 X101Ps Asterisk built with BUSYDETECT_MARTIN busydetect=yes busycount=10 callprogress=yes signalling = fxs_ks With this setup, the best I can do is get voicemail with 17 to 19 seconds of silence tacked on at the end. Ideally, I'd like at most 2-5 seconds. Has anyone had any success with this? It seems that hangups are indeed detected,

Hi, I have little problem and it is so embracing when u r talking to some one and line get hang-up. When some one calls from out of state or out of country my calls gets randomly hang-up with in few seconds and it happens with most of the calls. It's happening randomly I got few calls, which worked. I have also observer that with quite few call I can't hear the person and person can

Hi There, Thanks for all your suggestions. I have now compiled asterisk from cvs running on FD4. I have performed all the suggested configurations: > busydetect=yes ;changed 17.03.04 from no > busycount=7 ; added as above > for me the distro asterisk package didnt hang up properly on busy > > signal. I > needed to download the source and uncomment BUSYDETECT_MARTIN