similar to: T38 fax solution with Asterisk possible?

Fax over T38 is failing, on the same system it worked with Callweaver. What do I need to post to be get further assistance please?

Hi, folks. I'm having a heck of a time trying to get outgoing T38 faxing (I don't need inbound right now) working with FFA and Gafachi. G711 faxing works (as well as can be expected over the internet), but I want the higher reliability of T38. I'm running Asterisk 10-beta1. When I drop my callfile in to make the call, I get this: -- Attempting call on SIP/18884732963 at

Hi, Do you have any example showing how to use SendFAX ? I can see several examples of ReceiveFAX but not a single one showing SendFAX. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081127/b41ca08b/attachment.htm

Is it possible to force T38 for all invocations ReceiveFAX() ? Receiving fax always worked OK on Callweaver though I could put SipT38Switchover() into the dial plan. I can't with Digium fax, and it always fails at the point it decides to switch to T38.

Hi list, I'm evaluating a private telephony scenario of about 20 locations - 300 phones, 50 FAX machines. Initial overview points to the installation of asterisk at three locations connected to the PSTN via ISDN PRI. All other locations, small by themselves, would get SIP phones managed by asterisk, since there is good IP connectivity between all sites. Now on to the

It seems that Spandsp has everything in it (when you include rxfax and txfax) to be a T.38 termination when used with Asterisk 1.4? And if so, what version of Spandsp? What version of IAXModem (so I don't have to also deal with T38Modem)?

Sending works but on receive it keeps failing - reporting back 'training' failure. I am using Asterisk 1.6 with T38. What should I post to the list to assist diagnoses? Michael

Hi all, I have a question regarding using T38 for fax sending and here is my scenario: fax -> SIP ATA (T38 enabled) -> Asterisk #1 -> IAX TRUNK -> Asterisk #2 -> SIP ATA (T38 enabled) -> fax My question is, how can I know if I'm really using T38? is T38 information coming to the other side (because of SIP to IAX conversion) or just plain g711a data? I'm using Linksys

Hi, I remember seeing a T38 Gateway application for Asterisk 1.6 floating around, but I can't seem to find it again. Does anyone have any pointers to it? I really want to be able to send an incoming T38 connection directly to the PSTN. Thanks. -- James

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

The scenario we have is fax send/recieve software that ONLY talks T38 and an asterisk box. We have ITSP providers that do NOT talk T38 but G711 only. Does asterisk have the capability to take the T38 call from an ATA or T38 software then bridge/transcode it and do G711 out to the PSTN providers? If not is there another product PAID or FREE software or hardware that can do this easily and

Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet !

Hello List, I think I've discovered a little bug in t.38 bug in 1.6.0.22 regarding the speed (T38MaxBitRate) used to send the faxes. Asterisk always responds with a=T38MaxBitRate:2400. I've tried with Patton and Grandstream devices and the result is always the same. Patton ignores the parameter and sends the fax at 9600.

I have problem with fax machine Panasonic DX600. It's connected to Grandstream Handy Tone 386 which is connected to Asterisk. Asterisk is connected to my SIP provider. To some numbers I can't send FAX, and I get following error on CLI. WARNING[2237] chan_sip.c: Unknown SDP media type in offer: image 31358 udptl t38 I believe that Panasonic DX600 machine supports T38. And when I have

Hi, I'm using asterisk 1.2.1. Is there anybody out there who knows what this warning means? *WARNING: chan_sip.c:3470 process_sdp: Unknown SDP media type in offer: image 5004 udptl t38* Google does not help at all. TIA Giorgio Incantalupo

Dear all, I'm trying to enable Asterisk to work with FAX using T38. I've tried Asterisk 1.2.4 with the available patch found at URL http://bugs.digium.com/view.php?id=5090 and also with the new 1.4 Beta3 that is announced to support it too. With both Asterisk versions, I've sent with success FAXes between two FAX machines each one attached to an ATA interface, both registered in

Hello list, I read on voip-info.org that Asterisk 1.4 support T38 passthrough. So I guess this means that I can have a Grandstream HT503 with T38 support and an analogue faxmachine on the other side of my Asterisk and a T38-account with a ITSP on the other side of my Asterisk machine, right ?! The fax coming from the faxmachine passes the HT503 to my Asterisk and my Asterisk sends the fax to

Hi I have finished the installation of my VoIP basic configuration ... Actually: - All calls from my E1 are received by a Cisco AS5300 and sent to my Asterisk (in G711 by SIP). - All user are connected by SIP to the Asterisk - All calls from User are sent by asterisk to the Cisco AS5300 Now, i want see if i can supply T38 Fax Gateway .... I am search to: - Cisco Receive all

I found a bug in the latest T38 passthrough patches, the effect is that a non-SIP call after being put on hold is then lost, no resume is possible. The fix is to be applied in the chan_sip.c file: } else { /* No bridged peer with T38 enabled*/ transmit_response_with_sdp(p, "200 OK", req, 1); } - } + } else transmit_response_with_sdp(p, "200

Anyone have any testing experience with T38 and HT-502 Grandstream? I just want to confirm that t.38 is working on this device. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110801/fea18d8c/attachment.htm>