similar to: speex, ilbc and g729 codecs, GSM with IAX

Hello All, Anyone here has experience of accepting a ilbc call and sending it on g711 or g729 I am having problem in VOICE , call goes though but there is no voice. Senario: Call is coming in from Machine A to Machine B, sending to Machine C Machine B is an asterisk box, transcoding it from IBLC to G711 and g729. Problem: Voice is not appearing on the sip user sitting on machine A Already

Hi List; Anyone tried to use speex, ilbc and g729 and come back with a preferred one in the quality? Regards Bilal ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

Greetings all, I'm trying to improve the codec selection on a few of the asterisk boxes we have to keep the g729 licences free for calls from ATAs that don't support anything apart from g711 and g729. GSM seems to offer noticably inferior call quality (at least when using a softphone + decent headphones), but it's about where I want the bitrate to be. I know there are lots of Speex

Hi List; I heared that IAX is good for NATing issues, but I do not know if it can help me in that senario: I have two Asterisks machines in different sites and both are behind NAT (both have private IP address), I need to link these two asterisks with IAX trunk (if it help really in such senario), but I do not know if it will work without doing special routing settings on the router (like

Folks! We have purchased G729 and have been testing the codec on mUltiple Gateways. Here is what we have found. Here is the config I have used: ------------------------------- Asterisk Server On Dual Pentium Xeons with 6GB of RAM, running on Fedora Core 2 User1 is in USA on Broadband Cable User2 is in India on 64Kbps ISDN Line User1 using SIPURA SPA 2000 user2 using Xten professsional(X-pro)

Hi All; I need a help as the voicemail need GSM codec while I am using G729 for the call, why Asterisk does not do codec translation from G729 to GSM, it does not support? Any need for settings, what I am missing? Regards Bilal ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search.

Ok, I built a test system to duplicate my problem and provide myself a platform that I can mess around with to try and break any features. My problem is G729 pass-through from a gateway to a phone. I think I even have transcoding working, which makes me more confused on what's wrong with my pass-through. It must be a configuration issue. The basics... *CLI> core show version Asterisk

Hi All; I need to buy one IAXy device, but I discovered that it supports only g711 and ADPCM codec, so I was wonder that it does not support g729 or GSM?! Anyway, what is that ADPCM and how much it consumes bandwitdh? Also, asterisk support such codec? What its name in the configuration? Any advise? Regards Bilal

Hi List; Where I determine the codec to be used for the SIP Trunk (between Asterik and another SIP softswitch)? Regards Bilal ____________________________________________________________________________________ Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545433

Hi List; Is there an Digium cards support GSM SIM cards so we can fix an SIM card to be used for calls within mobiles as it is less rate? Or I have to use an FXS to SIM adaptor? If yes, then anyone advise a models and prices? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo!

Hi All; I have been chocked just when I saw some posts talking about how much the IAXy is bad :) - So I would like to ask, did any one try it later and wether it is good or not? I am asking this because I need to use it as it is NAT Transparent (as I read also, and I did not try it to see how much it is transparent). What about codec? Why it is only support g711 and does not support compressed

Hello, I'd like to implement some public sip uri's that poeple can call into and get an echo test. Is there a way to force a codec so that users can test various codecs? Something like: echo-test at example.com (negotiates whatever codec, is there a way to figure out what codec was negotiated and tell the user) echo-test-g711 at example.com (forces g711) echo-test-g729 at

Hi All, I've been playing with GSM and iLBC over low bandwidth connections (central Asterisk box with 2mbps, to ADSL users on 512/256) and both seem to perform well. Based upon what I've read in the archives and at voip-info.org iLBC should perform a little better if packets are lost, than compared to GSM. Do you find this to be true in practice, or is GSM just as robust? Whilst

Can someone on the list confirm if Asterisk can do g723 or g729? when connecting to provider? or it is only supporting g711? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/1d6c78cb/attachment.htm

I installed G729 from Diguim and I was expecting the sound quality on my i686 machine to be better than gsm. Compared to gsm, G729 sounds closer and a little robotic. Is this what is supposed to be or am I missing something? I am interested in G729 because the internet in my country is very expensive and I want to save every bit possible. I want to use G729 because it takes less bandwidth for

Ok this is my first post and I will try to keep it short. I have searched everywhere and haven't found an answer to my question I have two Trixbox servers that are connected over the Internet via an IAX2 connection. We are experiencing very poor sound quality. I have tried many different codecs gsm, ilbc, g729, g711 and all seem to have the same problem. (All though g729 seems to work the

Hi List;

Dear all. I recently subscribed to a VoIP provider through IAX. The require to connect with either G729 or GSM, I chose G729 based on their recommendation. The service works very well, however ... people mentions how distorted our voice sounds. We have plenty of bandwidth available so I don't think it comes from our side. What it means is that it comes from two things: 1-G729 gives bad

Hi List; If I am configuring Diguim Analoge card, then I need to run #modprobe wctdm, but the question why I need to run #modprobe zaptel also? What #modprobe zaptel does a things that #modprobe wctdm does not do? Any help? Regards Bilal ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels

Hi to all in a scenario where: - the bandwith is shared with other traffic (HTTP,VPN,ecc) - the PBX is on a remote VPN peer - due to many reasons Qos is not usable There is a IAX trunk between 2 Asterisk 1.4 i've tried different codecs (ulaw,alaw,gsm) but the main problem still remain the same: too many voice packet get lost. The main problem is surely on the network, but the strange thing