similar to: Which best practices to build and deploy Asterisk on different hardware ?

Hi Everyone, Knowing that running Asterisk on an embedded board like the Alix2d3 requires some fine tuning. Do you know of any good guides out there that does this from beginning to end? Looking to run this in a small office environment. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello Since TDM cards are known for being particular when it comes to motherboards (PCI 2.2, etc.), I was wondering if there is a utility that can check that the Zaptel driver works OK and can tell if the TDM card is compatible? That way, if an FXO module is not reporting an incoming call, we'd know it's because of the Zaptel driver, and not something elsewhere. Are "dmesg",

Hello, I'm rather new to svn, so please, forgive me if this question sounds naive but is it normal that no trunk/ subdirectory is visible in http://svn.asterisk.org/svn/libpri/ ? I can see a trunk/ subdirectory in either asterisk, dahdi-linux or dahdi-tools. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello Since I got the IBM Netvista to boot Linux, and am still waiting for the Compact Flash cards that I ordered, I was wondering if someone knew of an Asterisk distribution that can run on that kind of diskless host? I've taken a look at AstLinux and AskoziaPBX, but they both seem to be meant to be installed on a solid-state medium instead of RAM. For instance, the Netvista is unable to

Does this make a significant improvement? The box in question I was going to try this with has a 4 port TDM card w/ plenty of horsepower, but I do intend to later migrate to a Soekris unit running Astlinux and therefore might not have the power to run it after. If the difference is significant, I may move to an ITX board so I could use a bigger CPU, but only if the hassle is worthwhile. Any

Hello Asterisk, Back in 2009 I built a small Intel Atom based computer running Centos 5 for my asterisk system. 5 phones, 2 people 1 POTs line and six or so SIP numbers. So basically no load. I'm feeling like it's time to build another machine. It's probably silly, but it's been six years and I can't upgrade the OS which is falling behind. I'd likely just put

Olivier If you installed asterisk from source, you need to recompile it after kernel version upgrade. This will compile & install asterisk modules with latest installed kernel sources. -- regards, abdul basit On 19 December 2017 at 08:01, Ron Wheeler <rwheeler at artifact-software.com> wrote: > Linux x.y.com 3.10.0-693.5.2.el7.x86_64 #1 SMP Fri Oct 20 20:32:50 UTC > 2017

Hello, Is there any app_backticks (see http://www.voip-info.org/wiki/view/Asterisk+cmd+Backticks) equivalent or workaround for 1.6 ? In the past, I had trouble trying to use ENV() function. Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090407/966917a0/attachment.htm

What options are available for installing an asterisk system onto a bare-metal system ? Ones that I have seen: pbx-in-a-flash trixbox astlinux What I am trying to achieve is to be able to shove a cd / usb into a machine and have it install asterisk, complete with my .conf files. I also need Cepstral installing. Ideally, I would like to be able to mount an .iso file, chroot into it, and

Hi, It seems BRI signalling settings are missing from http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conf I would like to add those parameters : bri_cpe_ptmp bri_cpe bri_net Is this http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conftied to a specific Asterisk version ? Can I edit this ? Regards -------------- next part -------------- An HTML attachment was

I'm looking for a web GUI to Asterisk that I can run on some small embedded hardware. I've used FreePBX in the past but the overhead is not to my liking and it is entirely too complicated. I do not wish to change my entire OS just for the GUI either (aka AstLinux). Is there anything out there? I'd like to have only a small set of features, primarily the configuration of extensions,

Hi, While issuing make, I've got: ... CC [M] /usr/src/zaptel-1.4.11~dfsg/kernel/zaptel-base.o /usr/src/zaptel-1.4.11~dfsg/kernel/zaptel-base.c: In function ?zt_register?: /usr/src/zaptel-1.4.11~dfsg/kernel/zaptel-base.c:5230: error: implicit declaration of function ?class_device_create? My system is Lenny and before getting this error, I successfully did : apt-get source libpri zaptel

Hi, For debugging purpose, it might be useful to repeat every 30s or so, pri show span and zap show channel commands have the results merged with /var/log/asterisk/full log file? Any better idea than running an dedicated shell script with a "asterisk -rx pri show span 1" line ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

After a reboot, I can't reproduce the problem anymore which is quite frustating. 2011/6/14 Tzafrir Cohen <tzafrir.cohen at xorcom.com> > On Tue, Jun 14, 2011 at 03:44:32PM +0200, Olivier wrote: > > Hi, > > > > I'm using a two-years old installation script for the first time on a > > Squeeze (linux 2.6.32) platform. > > For an unknown reason (might

Hi, I'm using a revision 6822-enabled Dahdi-Tools (see https://issues.asterisk.org/view.php?id=13897) with a Junghanns QuadBRI. 1. Do I still need qozap driver ? If positive, how is it recommended to get it ? 2. Which line should be included in /etc/dahdi/modules to have the appropriate driver loaded ? 3. The process I'm planning to use is : A- Hand edit /etc/dadhi/modules,

Hi, When reading logs, I can see a couple of lines such as : full.6:[Jun 30 15:53:26] NOTICE[6599] chan_dahdi.c: PRI got event: Alarm (4) on Primary D-channel of span 1 full.6:[Jun 30 15:53:32] NOTICE[6599] chan_dahdi.c: PRI got event: No more alarm (5) on Primary D-channel of span 1 full.6:[Jun 30 15:53:32] NOTICE[6607] chan_dahdi.c: Alarm cleared on channel 1 full.6:[Jun 30 15:53:32]

Hi, Has anyone information about BRI hardware supported by 1.6 libpri ? In another thread, I was told a basic BRI card with HFC chipset (Bewan Gazel 128) was supported but I would delighted to lear about other harwarde (and specifically about Digium B410P). Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I'm compiling Asterisk from source on Debian systems. I'm currently writing a script I'm planning to launch when upgrading from one Asterisk version to another one within the same class (from 13.4.0 to 13.12.0 or from 13.12.0 to 13.8.0, for instance). Reading [1], I thought the following would work: cd /usr/src/asterisk-13.4.0 ./configure make make install ... cd

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Hello, Is it possible, for testing, to connect an cat5 straight patch cord between 2 ports of a Digium B410P card and use these 2 ports as a normal dahdi trunk ? I've tried this: One port is set as NT, the other as TE. I would expect timing to come for system hardware so I choose in /etc/dahdi/system.conf : span=1,0,0,ccs,ami span=2,0,0,ccs,ami Results: - both ports lights are green -