similar to: Callerid Error

Asterisk Users, I am running Asterisk 1.4.11, Zaptel 1.4.5.1, and Librpi 1.4.1 on a Debian "Etch" system. On the recorded voice mail messages, the volume is really low when retrieving them with my cell phone. I tried with multiple cell phones with the volume level high and still, the same problem. I tried to increase the rxgain to 12.2 in the zapata.conf file and it had no affect on

Asterisk Users, I am running Asterisk-1.4.11 with Zaptel-1.4.4 on Debian Etch System 2.9.18-4-amd64. A TDM03B is installed on the Debian System. Every time, I try to change my voicemail pin via the Sip phone, the voicemail.conf does not get modify and I see this warning message on the Asterisk command line: [Aug 29 00:12:23] WARNING[19142]: app_voicemail.c:799 vm_change_password:

Hi all, i use asterisk 1.2.7 and i have a problem with callerid. i use sangoma a200 cards. one fxo one fxs module i have these scenario - bob calls adam, where bob calls into my asterisk and adam picks up "from" my asterisk - bob and adam are speaking to each other - meanwhile eve calls adam, adam hears a beep, and knows there is an other caller on line. - bob and adam stop seaking

Can anyone tell me what this message means? Got event 17 (Polarity Reversal)... I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0. It appears that I get this Polarity Reversal each time an inbound call hangs up. This results in another ring, but no one is there. It appears as an unknown caller, but I believe its a phantom. Thanks, Jim [Oct 10 12:47:54] NOTICE[6669]:

I've updated to the latest CVS as of today (and rebuilt RedHat 9). My setup is as follows: Wildcard X101P - channel 1 TDM400P - channels 2-3 - fxs cards with fxo signalling, channels 4-5 - fxo cards with fxs signalling I got CallerID to work on channel 4 with an old CVS, despite the usual "Didn't finish CallerID spill" message. However, as soon as I insert the following

Hi ! I ma having trouble with my PTSN line. When I call to my asterisk I get this.. -- Executing [s at from-pstn:3] Hangup("Zap/5-1", "") in new stack == Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/5-1' -- Starting simple switch on 'Zap/5-1'[Jan 5 12:45:06] NOTICE[2893]: chan_dahdi.c:6869 ss_thread: Got event 17

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

Has anybody ever integrated Skype with Asterisk? If you have, which software would you recommend to accomplish such a task? ChanSkype? And how reliable are the calls? Did the DTMF tones work? Thanks in advance. _________________________________________________________________ Discover sweet stuff waiting for you at the Messenger Cafe.? Claim your treat today!

Hi list, I am running TDM11b + Asterisk-1.4.9 + Zaptel-1.4.4 + Libpri-1.4.1 on CentOS 5. I am having trouble to make my simple IVR extension work, here is relevant config: zapata.conf ---- context=incoming signalling=fxs_ks channel => 4 context=internal signalling=fxo_ks channel => 1 ----- extensions.conf: ---- [office] exten => s,1,Dial(Zap/1,30) [home] exten =>

Hi, I'm running Asterisk 1.0.8 on Gentoo, with an X100P (clone) card, and I'm having problems with Caller ID. I have run clidtest, and it seems happy enough, returning:- server clidtest # ./clidtest /dev/zap/1 Number: 0412222222, Name: MOBILE (that number's fake.) However, I'm not getting the caller ID passed through with *. Sometimes I get a "failed checksum" like

SBC installed a T1 ADTSe (Digital Trunking Service Enhanced) e&m wink start with 24 1 way trunks. The CO says they dial pulse DP the seven digit dnis number. The channels work now but take long time to answer and get these messages repeating until I guess the CO stops Pulse dialing the number. Nov 23 19:08:58 WARNING[1827865]: chan_zap.c:4718 ss_thread: getdtmf on channel 8: Operation now

Hi, I'm running Asterisk 1.0.8 on Gentoo, with an X100P (clone) card, and I'm having problems with Caller ID. I have run clidtest, and it seems happy enough, returning:- server clidtest # ./clidtest /dev/zap/1 Number: 0412222222, Name: MOBILE (that number's fake.) However, I'm not getting the caller ID passed through with *. Sometimes I get a "failed checksum" like

hi all, We have a TDM400 card with 4 wfo modules. now the modules load fine and when i start asterisk with on phone line connected it just starts spewing these messages: -- Starting simple switch on 'Zap/4-1' Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)... Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2 (Ring/Answered)...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Making some changes in extensions.conf to test the incoming calls so that these are derived to a SIP extension, I found something that draws attention to me: if I test calling to my PSTN line from a mobile phone, when take the call from the SIP extension (softphone), if the mobile phone releases the call, sofphone do it too without problems,

Hi. I gave up with the IBM NetFinity, so I'm going to buy new hardware. I'm going to install: 1-)One X100P (1 FXO module) 2-)One TDM03B (3 FXO modules) I'll have the 4 FXO channels busy almost all the time, and I would like quality to be as good as possible without going to the high-level hardware. I would like to learn of some tested configurations (I've heard of problems

Aloha, I'm finishing up the final touches on this install, and have run into an odd problem. I can't seem to get Caller ID on the analog phone lines working. It's a Digium AEX 410 card. I have Verbose set and a line to print the CID: I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf and users.conf [analog] include=>default exten =>

Hi all... I have a problem with caller id on my asterisk server. here is my configuration : centos-5, asterisk 1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2 ibm X-3200 series, xorcom astribank (16fxo, 8fxs), 16 line telco (hunting) everything fine until I try to feed my app with caller id. My extensions.conf : [incoming1] exten =>

Dear all. I have a tdm400p with an FXO module in slot 4 and an FXS module in slot 1. I have not configured the FXS port in an attempt to keep things simple. The problem is that when I call the POTS number (assigned by phone company) asterisk is seeing the call but then not doing anything with it. The verbose output from asterisk is as follows:

Hello list. I have a question about how to read the incoming calls' callerid on an FXO interface of a TDM 400 analog card; (it's one of those RED modules). Now -may this is the complexity adding step..- I have a GSM gateway attached to this FXO thing; incoming calls are processed as they should. But both when peeking on the CLI, as well as in the phone display I do not see the caller id.