similar to: Wait for dialtone feature on FXO device

Is it possible after dialling a trunk prefix to wait for dialtone (or wait 2 seconds) before continuing to dial the outgoing number ? I need to "hunt" for one of several lines, and when one successfully provides dialtone, to continue dialling.. A simple NO will do, but if there's a workaround, I have not found it. -------------- next part -------------- An HTML attachment was

hello, I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and zaphfc driver - point2point mode -. --------- | TELCO | | BRI | --------- | | PBX external S0 -------- | PBX | -------- | PBX internal P2P S0 NT Mode | | HFC-S Card P2P TE Mode

I have the following entry in zapata.conf, but I don't get stutter dialtone when there is a message waiting. Suggestions? Please? callgroup=1 pickupgroup=1 callerid="Paul mahler" <100> context=inside mailbox=100 channel => 1 Thanks, Paul

Is there any way to make the X100P to check for a dialtone before dialing? My roommate is tired of hearing random dialing in his ear when he's on the phone (same circuit as the X100P). I know one solution is to just put in a TDM400P for the house, but I'd rather get away w/o having to do that. Thanks, Jared

Looking at the pastebin, the Vega device sends a CANCEL with reason: Reason: Q.850 ;cause=16. Cause 16 is normal clearing and suggests that the original caller has disconnected. I would take a look at the Vega's logs Regards, Steve On Thu, 5 Mar 2015 at 11:41 ricky gutierrez <xserverlinux at gmail.com> wrote: > > > On Wednesday, March 4, 2015, ricky gutierrez

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

Hello, I created a new application for myself called Dialtone() by modifing res/res_indications.c file. It can be used as such: exten => s,4,Dialtone(30|${CALLERIDNUM}) exten => s,5,Playback(time-exceeded) exten => s,6,Goto(s|1) It will stutter if you have new voicemail and you have passed the mailbox number as I did above. It will stop dialtone the moment you press a key

Hi, The twist? We actually have far-end hangup detection working fine, and that seems to be where the problem lies for most people. Our problem seems to be with requesting a hangup from our end reliably. If we originate the call, we can hang it up. This suggests to me that the Sangoma A200D is sending the correct hangup signaling. This way round, it is 100% reliable. If we accept a call

Hi List, I cant seem to find the setting that changes this! You put a person on hold, they are on hold like normal, but after a few seconds the phone will then start having dialtone coming from the speakerphone, really weird!! Anyone know how to fix this? I see where it could be nice, but in this case, we just want them on hold is all, no dialtone! Any help would be great! Thanks! Ron

I'd like to write a snippet of dialtone that plays dialtone and collects a specific number of digits into a variable. Sort of like READ but with a generated dialtone. Naturally, I want the dialtone to stop playing after the first digit. I can't find this anywhere. Only thing I can think of is a no-password DISA. Is this the correct method? Is there a better one? </edg>

Hello, Here's what I'd like to do: call my Asterisk box from a phone, hangup after a few rings, then Asterisk calls me back and presents a dialtone, than I can dial any valid number in the context the call originated. I've done it with CAPI (thanks to the script on http://www.junghanns.net/asterisk/page14.html), I'd like to do it with H323. Problem is, how to present a

Hi, I see applications for signalling busy, congested, ringing, progress etc, which I understand can be provided either in or out of band. But all I want to do is generate a dialtone. This obviously can only be done in band. There is code for generating the tones when you have a physical line, like the alsa channel, or a zap channel. But I'm just thinking of if they've selected an option

Hi, I'm having a little problem when trying to make a call from asterisk. I connect a SIP phone to asterisk, and in the asterisk box I have a TE110P card connected to a E1. When a SIP client makes a call through the E1, I received no dialtone in the SIP client. In the same manner, when somebody from the POTS network makes a call to a SIP client (through * and the E1) he doesn't receive the

Is there a way to generate an old-fashioned dial tone with Asterisk? I'm thinking of one that sounds like: http://www.seg.co.uk/telecomm/dialtone.wav -- Phil Reynolds o ____ mail: phil at tinsleyviaduct.com |L_ \ / Web: http://www.tinsleyviaduct.com/phil/ (_)- \/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

i need to know something in the zaptel configuration as it seems i can configure detecting the busy tone and hangup after number of busy tone counts, that was great but the problem is sometimes the pstn line has no dialtone and when i try to make call it continue dialing while not having a dialtone! while it should say "all lines are busy/congested" how can i configure that?? i already

So I have an X100P, and a TDM10B both working (at least I think they are). The drivers have been loaded and ztcfg -vv shows no errors in the configuration of two channels. When I run asterisk -vvvc and pick up my phone (plugged into TDM10B), I don't gear a dialtone. in phone.conf, I have [interfaces] mode=dialtone format=slinear ... Shouldn't that produce a dialtone when I pick up the

I upgraded from 1.0.9 to 1.2.1. In 1.0.9 everything worked perfect. Now, I call in my IVR, and after navigating in menus when I get dialtone for dialing extension, Sound is choppy and I get bunch of messagess: -- Silence suppression is disabled (option_silence_suppression=0 chan->timingfd=30) -- Silence suppression is disabled (option_silence_suppression=0 chan->timingfd=30) -- Silence

Hi, Is it possible with asterisk to deliver a dialtone to a software phone, such as kphone? I'm able to dial, but the silence seems to confuse my users :) thanks, lane

I've been searching the archives for the proper "Wait for Dial tone" command in the "Dial(Zap/g1/18005551212)" dial sting. Does anyone have an example of it's use? Arick -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040906/6f8b21a6/attachment.htm