similar to: Newbie: Two problems with Asterisk Config, Please Help

with wireshark i need decrypt traffic every call which is time consuming. get debug from pjnat through asterisk is not possible because of technical reasons or nobody did it? in my case its strange that ice candidates are the same good call v=0 o=- 3669976329745317845 2 IN IP4 127.0.0.1 s=- t=0 0 a=msid-semantic: WMS EoNIdKcMZvWBLULGqGPJTDe12ujjFEemeapo m=audio 52421 RTP/SAVPF 8 0 101 c=IN

Hi, I was able to use Unsniff to validate that the incoming 20 byte payloads of audio from the downstream IAX2 trunk was definitely G.729a whilst Asterisk 16.13.0 transcodes to G.711a unnecessarily. Media is confirmed as having been negotiated as g729 on all four streams. Nuance with this call is that it's from a WebRTC client which doesn't transmit any audio, could this be influencing

hi, i have following topology PSTN - Asterisk ---- internet -----  router - jssip client (wss) Asterisk 13.29.1 on public IP, chan_pjsip for wss, chan_sip/udp for SIP connection to PSTN router - public IP/private IP (NAT) jssip client - private IP - sip over websocket to Asterisk PJSIP ~30% of calls has problem with no audio. reason is that Asterisk is sending RTP to private IP of jssip

Asterisk is on public IP (as described in the first email) i have 10 years experience in voip, 4 years webrtc in production. i know about ICE/STUN/DTLS-SRTP. yes, not every detail but the basic mechanism but i confess. i dont understand WHY Asterisk SOMETIMES switches destination IP in RTP. this is not only about ICE. its about RTP engine too which is Asterisk specific and Asterisk DEBUG is

Hi, I was able to use Unsniff to validate that the incoming 20 byte payloads of audio from the downstream IAX2 trunk was definitely G.729a whilst Asterisk 16.13.0 transcodes to G.711a unnecessarily. Media is confirmed as having been negotiated as g729 on all four streams. Nuance with this call is that it's from a WebRTC client which doesn't transmit any audio, could this be influencing

Hi, I was able to use Unsniff to validate that the incoming 20 byte payloads of audio from the downstream IAX2 trunk was definitely G.729a whilst Asterisk 16.13.0 transcodes to G.711a unnecessarily. Media is confirmed as having been negotiated as g729 on all four streams. Nuance with this call is that it's from a WebRTC client which doesn't transmit any audio, could this be influencing

Hi, We have a scenario where inbound calls from an upstream provider (chan_sip) sent downstream (chan_iax2) negotiates only g729 yet RTP media contains g711. Both the upstream and downstream trunks are limited to only offering g729 whilst the initial invite from our upstream provider offers both g711 and g729. Asterisk presumably simply forwards the media from iax2 trunk encapsulation to sip

Hello, I've configured with the very same script 1 Intel Xeon and 1 Intel Pentium4 machines. On one MOH is working properly On the other, I can read on console, lines such as those bellow but I can't hear anything. In which direction, should I further investigate ? If this help, here is my setup: me ---<PSTN-ISDN> ---- Patton 4638 ---<SIP>--- Asterisk 1.6.1.18 --

Hi! I have two identical SIP accounts on Asterisk 1.4.22. One account is registered with eyebeam, the other one is registered with a SNOM phone. When using the eyebeam client DMTF detection works fine, when using the SNOM phone many digits are missing in the DTMF detection. I analyzed with wireshark and both phones uses RFC 2833 and the trace looks pretty the same. Also the rtp debug log

Dear all, I have a very strange problem : * external calls work perfectly, * internal calls between some phones too, * but internal call between two similar phones don't work !!! (Snom 710) When we have sound, there are no errors in asterisk. When we do not have sound, there is the following error : * [Nov 10 17:51:47] ERROR[21480]: chan_sip.c:28306 setup_srtp: No SRTP module

Snom default configuration is SRTP enabled. You should disable the SRTP from the phone web GUI configuration Sincerely, Sam Basan From: Mitul Limbani [mailto:mitul at enterux.in] Sent: Thursday, November 12, 2015 5:25 PM To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] No sound with internal

Hi, I am new to Asterisk and I am having a setup problem that I am trying to resolved for the last couple days without any success. I am pretty much desperated on this issue and I don't know why. Can someone please kindly help me to troubleshoot this? I can't hear any audio from Asterisk when running Playback or VoiceMail tests. I have my Asterisk server ( running on Debian,

Hello. I'm not quite sure what the problem with my samba is. Im running red hat 9 and samba 3.0 and my log has far too much information. this is my samba log: --------------------- samba Begin ------------------------ **Unmatched Entries** lib/util_sock.c:get_peer_addr(978) getpeername failed. Error was Socket operati on on non-socket : 2 Time(s)

2010/10/24 Olivier <oza_4h07 at yahoo.fr> > > > 2010/10/14 Danny Nicholas <danny at debsinc.com> > >> ------------------------------ >> >> *From:* asterisk-users-bounces at lists.digium.com [mailto: >> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Olivier >> >> *Sent:* Thursday, October 14, 2010 3:34 PM >> *To:*

Hello, I have a large data frame that is organized by date in a peculiar way. I am seeking advice on how to transform the data into a format that is of more use to me. The data is organized as follows: STN_ID YEAR MM ELEM X1 X2 X3 X4 X5 X6 X7 1 2402594 1997 9 1 *-00233* *-00204* *-00119* -00190 -00251 -00243 -00249 2 2402594

Hello, My setup is : phone ----- PSTN/ISDN ----- Patton SN4638 ------- Asterisk (Asterisk is in 1.6.1.18, Patton in 5.3) When I call the Asterisk, I can read from console that : - the call comes in, - the line MusicOnHold(,10) in my diaplan is reached and played, - I see RTP packets coming in and out (hundreds of lines such as: Got RTP packet from 192.168.102.200:4890 (type 00, seq 005360,

My phone is located behind a NAT, 172.16.0.0/21. Asterisk 16 is on a public IP. PJSIP has the config below: force_rport=yes direct_media=yes disable_direct_media_on_nat = yes direct_media_method=invite But when I send a call I see the RTP being sent to my private address, vs the public IP. This only happens when Asterisk has dialed the call to another carrier. If instead of Dial I choose

Hi, im using a Asterisk Server which is not behind NAT. First i had problems with the fax detection. But this is now solved after adding a wait(2) at the correct place. But i'm still unable to receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: RTP Read too short after the Fax session has started. My sip.conf includes [general] allowguest=no alwaysauthreject=yes sendrpid=rpid

I keep getting errors in my logs about can not bind to address *.*.*.*:53 address in use.. what did i do wrong in the setup of my server or domain? attached logs and smb.conf along with the output from my provision command. Jeffrey D. Means meaje at meanspc.com Owner / CIO for MeansPC http://www.meanspc.com/ Custom Web Development For Your Needs. (970)308-1298 - The

Hi All, I installed R 2.5.1 recently on a PC (Windows XP Professional 2001) and tried to install some R packages. It took several minutes and gave me the following message. > utils:::menuInstallPkgs() --- Please select a CRAN mirror for use in this session --- Error in open.connection(file, "r") : unable to open connection In addition: Warning message: unable to connect to