similar to: Configuring modem pools in Asterisk

Okay, T1 card issue sorted out. New Lesson: Stay Away from TigerJet chips. Next up, modem pool -- I wanted to know if the below config looked anywhere near half-sane for defining in asterisk what is essentially a small pool of four waiting modems that will handle faxes if another modem is busy: exten => _X.,1,Dial(IAX2/iaxmodem0/${EXTEN}) exten => _X.,2,Busy exten => _X.,3,Hangup

Hi all, So I'm trying to work on this complex fax server setup, and part of it involves connecting my asterisk server to my Rolm CBX switch, via a T1 line. I plan on using Asterisk simply as a T1-PRI Bridge to IAXmodem (which in turn, activates HylaFax+ to handle the faxing). So far, though, I don't think I'm getting 100% of the way there. When dialing the fax extension from my

Hey all, Working slowly on getting the myriad number of parts to my fax system plan together, and one of the pieces I want to nail is how to go about, for the outbound context (fax-out) pre-pending a digit onto a number? I.e., for all my testing right now, I've been dialing '91XXXXXXXXXX', as the asterisk server doing faxing junctions into my old Rolm CBX switch, and so I need the

I have found that the shortcut I add to the windows machines has a few options added to it for it to run. eg: T:\Acucorp\Acucbl620\AcuGt\Bin\wruncbl.exe -c lawpac.cfg lawstart.cbx T:\ is the network mapped folder that is accessible after logging on to the servers with Novell Client, this folder may also be seen on suse using the client. the shortcut location is here: H:\TREVOR\LawpacWindows

i've heard that you can dump a plot file, and in doing so set a pixel parameter (cbx?). is anyone familar with this procedure? i would appreciate any insight. thanks, kevin

I just upgraded a very old Asterisk installation to the last 1.2.31 I can find in Asterisk.org site. Now for some reason my IAX clients cannot connect to the server. I can do a "iax2 show peer iaxmodem1" and I get this: * Name : iaxmodem1 Secret : <Set> Context : oficina Mailbox : Dynamic : Yes Callerid : "" <> Expire

[outgoing-fax] exten => _0XXXXXXXXX,1,SetVar(NumberCalled=${EXTEN}) exten => _0XXXXXXXXX,2,Wait(10) exten => fax,1,SetCallerid(${FAX_CALLERID}) exten => fax,2,Dial(Zap/g1/${NumberCalled},60) exten => fax,3,Hangup exten => t,1,Busy exten => i,1,Busy -----Oorspronkelijk bericht----- Van: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]

Hi all, Noticed a curious issue in my testing setup for a faxing system I'm putting together, but it looks like if I let the lines all sit idle for a few days (no one uses this yet, so the whole thing really does sit idle until I do testing on it or something else), something I believe on my Asterisk end goes to a kind of "Sleep". It's hard to describe really, but I'm not

I am currently a new asterisk user I have worked with the old rolm systems in the past. I have been asked to look around and find out how to do a few things in asterisk, either in asterisk itself or with third party software. The features that I am looking for are: 1. A good management application for setup and edit the .conf files for both the exten & voicemail. 2. A receptionist software

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk and

Modem connect speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank -

What an ACTIVE newsgroup! I'm in the early stages of researching Asterisk. My current environment is a small college (~1000 sets/~400 student sets), Avaya Definity G3si/Seimens Rolm Phonemail. As you can imagine, the maintenance, licensing, and equipment costs are HEFTY. So.. are there any small colleges/universities using PBX or Voicemail? If so, I'd be interested in your migration

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hi i use now iaxmodem for receive fax and that's work very good with Hylafax ;=) Do you know if we can sent fax using iaxmodem and Hylafax ? when i test: d?c 13 13:47:21.12: [13725]: SESSION BEGIN 000000014 330426690268 d?c 13 13:47:21.12: [13725]: HylaFAX (tm) Version 4.3.0 d?c 13 13:47:21.12: [13725]: SEND FAX: JOB 2 DEST 0426690268 COMMID 000000014 DEVICE '/dev/iaxmodem1' FROM

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

There's a #define macro in channels/chan_iax.c that you can modify to make this forced value higher. Just open it up in your favourite editor and search for '60' and you'll find it. Now if there's an easier way than having to change a source-level macro, I'm all ears... Cheers!, --jkinard -----Original Message----- From: asterisk-users-bounces at lists.digium.com

Hello all, I''m new to the list. But have been using Shorewall on and off for over a year now. The one thing that got me hooked on staying with Shorewall, was the extensive and useful documentation. Great Job! I see also that over use of blacklisting is time consuming for restarts, refresh and it also means the kernel spends more time checking incoming packets. The following is from:

Hi Daniel, That looks good. And cool ajax effects too. Just got my agileruby book and wking my way thru the example. Iam curious -----how long did it take you---from reading the book to the website I have started with chapter 2 but quite impatient to get multiple actions on the same page as you did with list/search and menus etc on the home page I know its supposed to be done using