similar to: Restricting registration for peer 'iaxmodem0' to60 seconds

I have setup hylafax today, along with iaxmodem. I'm just starting the debugging process and see the following message every 60 seconds: [Feb 19 17:44:16] NOTICE[1996]: chan_iax2.c:6021 update_registry: Restricting registration for peer 'iaxmodem0' to 60 seconds (requested 300) Can someone tell me what this means? Why is it there? And how do I get rid of it! Thanks, MD

Okay, T1 card issue sorted out. New Lesson: Stay Away from TigerJet chips. Next up, modem pool -- I wanted to know if the below config looked anywhere near half-sane for defining in asterisk what is essentially a small pool of four waiting modems that will handle faxes if another modem is busy: exten => _X.,1,Dial(IAX2/iaxmodem0/${EXTEN}) exten => _X.,2,Busy exten => _X.,3,Hangup

Hi all, So I'm trying to work on this complex fax server setup, and part of it involves connecting my asterisk server to my Rolm CBX switch, via a T1 line. I plan on using Asterisk simply as a T1-PRI Bridge to IAXmodem (which in turn, activates HylaFax+ to handle the faxing). So far, though, I don't think I'm getting 100% of the way there. When dialing the fax extension from my

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

I have never noticed the message prior my upgrade of CVS head: chan_iax2.c:5589 update_registry: Restricting registration for peer '611' to 60 seconds (requested 1200) What does it mean, and how can I fix it? 611 is a firefly soft phone. bye Ronald Wiplinger

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, 2 weks ago I asked questions about PJSIP and T.38 but got no replies. I upgraded Asterisk to git as of yesterday (309dd2a), and I'm still having the same issues. In the trace below, I'm sending a fax from Hylafax server through iaxmodem on Asterisk-13 (tiare) to a second Asterisk (11.18.0 t0gw) connected to the PSTN via ISDN; the

I can't seem to change the default registration for IAX clients: Feb 6 12:22:52 NOTICE[7883]: chan_iax2.c:5673 update_registry: Restricting registration for peer 'virbiage' to 60 seconds (requested 3600) Feb 6 12:23:03 NOTICE[7883]: chan_iax2.c:5673 update_registry: Restricting registration for peer 'test1' to 60 seconds (requested 1200) Can this be controlled on a

JID Pri S Owner Number Pages Dials TTS Status 58 123 S root 008675533661 0:2 4:12 02:12 No carrier detected Here is the asterisk output: [Mar 28 01:54:00] NOTICE[16753]: chan_iax2.c:6025 update_registry: Restricting registration for peer 'iaxmodem' to 60 seconds (requested 50) -- ast_get_srv: SRV lookup for '_sip._udp.voipuser.org' mapped to host

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hmm, I don't know if the zaptel fax detection will trigger. This is going through my company's Rolm CBX switch, using a plain T1 cable (yanno, RBS, E&M Wink, and all that jazz) between the two systems as a Tie line, so that may mess with the fax stuff. The Rolm's just wired to take a special extension block and pump anything coming in on them out the T1 trunk group to the

Hi, I am using spandsp-0.0.4, tiff-3.8.2, and agx-ags-addon with Asterisk 1.4.18. Everytime rxfax executes, Asterisk crashes: -- Executing [fax at phones:1] Set("Zap/2-1", "FAXFILE=/var/spool/asterisk-fax/1207322398.0.tif") in new stack -- Executing [fax at phones:2] RxFAX("Zap/2-1", "/var/spool/asterisk-fax/1207322398.0.tif") in new st ack [Apr 4

Hi, Have just been testing asterisk 1.8.0, 1.8.0-rc5 and a trunk version from about half an hour ago. IAX Friends (Zoiper Softphones) don't stay registered for more than a few seconds they start out with status unknown and quickly become unreachable, I am using realtime with postgresql, with tables and configuration that have worked fine for IAX in 1.6 and a trunk release from a few months

Hi, I'm trying to test my dial out function so I did something like this in extensions.conf exten => 999,1,Dial(Zap/g1/02601591) exten => 999,102,Congestion() My Zapata.conf looks something like this [channels] context=from-pstn group=0 switchtype=euroisdn overlapdial=yes faxdetect=no ; PRI port 1 (E1) ; context=1 group=1 signalling=pri_cpe channel=>1-15,17-31 I am able to

Hi, i was able to fix this problem when i added the line pridialplan=local in the zapata.conf but it depends on your telco, i think. marcus -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Gesendet: Donnerstag, 6. April 2006 11:50 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] Dial out on Zap Hi,

Hi, I am simulating the sending of fax using sendfax through voip to reach an Asteria server via ZAP/1 ( PSTN phone line ) which then route call to a fax machine at ZAP/2. It seems like I am not able to establish any handshake with the physical fax machine using the sendfax program. Does anyone know why that happens and how to fix it? The scenario will be deployed in remote location in the

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hi, I have a problem dialing a SIP phone which is logged in as different Astesrik machine from the one I am working with. I want to call a phone in Another astersik machine in , if it answers, calling a SiP phone registered in my ASterisk: My dialplan is: [mariaSIP] exten => _1.,1,Wait(1) exten => _1.,2,Dial(SIP/6021@192.168.0.51:5038,20) exten => _1.,3,HangUp() exten =>

I am trying to plot a figure within a figure (an inset that shows a closeup of part of the data set). I have searched R-help and other sources but not found a solution. What I would like to do is (1) produce a plot (2) specify a window that will be used for the next plot (in inches or using the coordinate system of the plot produced in (1) (3) overlay a new plot in the window specified under (2)

Hello, I have anolog lines coming throug Dahdi to Asterisk Server, one of the anolog lines is used for fax line. I received fax fine without any problems using Iaxmodem with Hylafax Server. Outgoint fax is the problem, when IAXMODEM dial out using Dahdi channel, dahdi answers and start to dial the outside number however Iaxmodem thinks that dahdi is the remote fax machine and starts sending fax