similar to: IAX2 trunks unreliable becoming UNREACHABLE aftera time

I have a network of offices using Asterisk that are connected via IAX2 trunks. The trunks work great for a day or two then for no reason at all one end of the trunk will become UNREACHABLE while the other end is still connected. The only way to fix the problem is to shutdown Asterisk completly then start it backup again. The end that dies is not always the same, some times it is server A and some

> If I did not resort to SIP for inter-asterisk communications > I would be out of a job at this time. >I fully confirm! I moved to SIP for an Asterisk-to-Asterisk trunk and my >problems flied away... Funny, I was talking to the CTO of a small CLEC and we were talking about Asterisk, I told him about my setup and my use of IAX, and his comment was about IAX was such a neat idea but

I've got this low-ping 100%-up dsl connection between two asterisk 1.2.7.1 servers. And oftentimes one of them would declare its opposite UNREACHABLE. Why can this happen? The host stanzas in iax.conf have raw IP's, so no DNS monkey business here.. An inquiring mind wants to know.

We have 10 SuperMicro PDSMi+ 5015M-MTs that are panic'ing every few days. This started shortly after upgrade from 6.2-RELEASE to 6.3-RELEASE with freebsd-update. Other than switching to a debugging kernel, a little sysctl tuning, and patching with freebsd-update, they are stock. The debugging kernel was built from source that is also being patched with freebsd-update. These systems are

On Sun 03 Feb 2019, Philip Rhoades via rsync wrote: > > For some years I have been using rsync quite happily to send / retrieve > files to / from SSHDroid Pro but recently I have started having a problem > when transferring large numbers of file - I am pretty sure it started after > upgrading from Fedora x86_64 28 to 29 - but I am not 100% sure. Below is [...] > Corrupted MAC

People, For some years I have been using rsync quite happily to send / retrieve files to / from SSHDroid Pro but recently I have started having a problem when transferring large numbers of file - I am pretty sure it started after upgrading from Fedora x86_64 28 to 29 - but I am not 100% sure. Below is the tail end of the output of: rsync -avvv root at 192.168.1.100:/storage . >

I believe auth-rhosts.c, function check_rhosts_file(), contains a bug that shows up when doing host-based authentication where the client_user name is not the same as the server_user name. Line 76 reads: strlcpy(userbuf, server_user, sizeof(userbuf)); I believe it should read: strlcpy(userbuf, client_user, sizeof(userbuf)); Otherwise later in the function this test will fail: /* Verify that

Hello, I'm new to the list, new to NUT, but not new to Unix-likes. I could use some help getting NUT to talk to my Tripp Lite G1000U. Searching Google for "Tripp Lite G1000U" returns exactly two hits at this writing, so that may not be a good sign. ;-) It may just be rebranded for sale through this source (Costco). Externally, the G1000U looks much like the SMART1000LCD: an amber

Version 1.4.2 but to be honest I have no reason at all to suspect that this is a problem with the asterisk software. I've able to replicate this from a few different "client" net connections and a across a few different linksys ata's. Where when you call into the host and enter the extension to connect to you miss the last digit of the extension. Almost every time you

Hi, my asterisk server has a strange behavior when all trunks are unreachable (for example due to internet connection), it doesn't accept registrations from any internal extension, and, obviously, I can't do any internal call. On the log I see only lines like: [2013-09-30 01:35:04] NOTICE[1827] chan_sip.c: Peer 'xxx' is now UNREACHABLE! Last qualify: 36 and then [2013-09-30

Hi - I have 2 Asterisk servers connected using 05 IAX2 trunks. I want to load balance incoming calls over IAX2 trunks. If any trunk goes down the calls traffic will be shared with other available trunks. When it gets Up the script is supposed to perform as desired i.e in load balance mode. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

We are currntly running mongrel v 1.1.4 mongrel_cluster 1.0.5 mysql gem 2.7.5 (built from source) rails 2.0.2 ruby 1.8.6 mysql version 4.1 this is run on a remote server. We are consistently getting "ActiveRecord::StatementInvalid (Mysql::Error: MySQL server has gone away: SELECT * FROM...." errors. When i then try and stop mongrel some (various) of the mongrels are in error state

I've turned on debug in a (IAXComm based) soft phone. I see the phone sending pings to *. I see * getting the pings. For some reason, with iax2 show debug, I never see any response on the console from *. However, the phone shows a response with INVAL. Seems like an odd response to a ping request. I believed it should get an ACK. Is that wrong? If I should get an ACK, what could I have messed

I have a couple of Asterisk 13.4 servers with an IAX2 trunk between them: [phone1] <--pjsip--> [server1] <--iax2 trunk--> [server2] <--pjsip--> [phone2] With this setup, audio calls work fine, but video doesn't work: I get a black window and if I remember correctly, I was getting white noise in one direction (not sure if the noise thing is asterisk's fault or the

I would like to ask, if someone observe also problem with peer qualify problems, my asterisk log is full with UNREACHABLE/REACHABLE messages, even when two asterisks are in LAN environment, please take a look into this debug, I can't find any problem with packet loss, all qualify requests are replied and acknowledged, I will submit bug report, if you will also not find any problems here...

Hi, I am using iax2 trunks between asterisk servers and am having a callerid problem. We are using realtime sip clients distributed between multiple servers. Only in test now but have run into a calleeid problem - the name of the called party is not displayed if the called party is on a different server, it works if the called party is on the same server. On each server sip clients show calleeid

Hi for all I'm making some test and I can see an incorrect behaviour. I have two asterisk with an IAX2 trunk. In asterisk 1 I have a queue and an agent and, in Asterisk 2 I have three clients. When the clients make calls to an asterisk 1, its calls entry in the queue. While they are waiting, an agent login into the queue. I'm waiting and waiting and waiting but the clients never contact

The situation is one of my asterisk servers is behind a NAT firewall and one is not. Both servers have multiple IAX peers. The NAT firewall has port 4569 mapped through to the asterisk server behind. But, the natted server is almost permanently unreachable from this non-natted server, even though, the non-natted server is almost permanently _reachable_ from the natted server. Details are below

To answer my own message, I figured out a solution (untested) about 10 minutes after posting and leaving the office. Doh! Anyway, the solution (now tested) was to make the Asterisk server behind the NAT register with its peers. Despite reserving port 4569 in the firewall, that was not enough in this particular NAT firewall - it was only being reserved for one connection. Kind regards, Sebastian

All, I have an issue with IAX that I can't comprehend. Approximately every eight minutes my servers go unreachable. They stay unreachable for exactly 10ms. I have two servers running IAX and it happens on both servers simultaneously. I have searched the archives and see similar issues, but not the exact same one. I am on the current CVS stable version of *. Also, during IAX calls,