similar to: which mobile compatible with asterisk

Hi, I'm trying to use a mobile phone (ericsson W300i) with asterisk through bluetooth. After some sutrggling, I foun chan_mobile. As some one already used this mobile with what result? I'm considering a simple asterisk system (for home use/test purpose) with : - one SIP service provider (with link to PSTN) - one SIP phone (a softphone on the asterisk box) - one mobilephone (ericsson

Hi, I'm trying to setup a mobile (ericsson W300i) and I'm having some difficulties (to pass DTMF through the mobile and to get sound). I'd like too know how could debug what are the common way to debug get information. remote mobile => mobile on asterisk (by bluetooth) => asterisk I'd like to be able use password on asterisk. I tried and looks likes DTMF is not passing

Hi all, I have a problem with chan_mobile: I installed chan_mobile, the phone (6230i) can connect to Asterisk through a bluetooth dongle (Cambridge silicon radio), Asterisk can receive calls from the mobile phone but when the call is hangup, the bluetooth connection of the mobile phone is disconnected imtermmediately ?. What is the problem ?. Thans in advance Giang -------------- next part

I'm trying to compile chan_mobile for asterisk 1.4 I've installed 1.4 from SVN and downloaded addons from SVN also. I make ./configure, make menuconfig, select only chan_mobile, and make. Then I obtain the following errors. (I've also tryed applying the patches I found at http://www.chan-mobile.org/?page_id=5 but with no better results. make[1]: Entering directory

Hi Folks, I'm trying to use my mobile as a trunk via bluetooth - calls done in a softphone go thru GSM network and calls destinated to my mobile are answered at the softphone. I have asterisk configured to do so but I'm facing an issue - Audio is audible but it?s not intelligible. I feel like the audio is breaking. Below is the asterisk log. I also get lots of ?hci_scodata_packet: hci0

Hello, On a LAN, is it possible to install a bluetooth dongle on one workstation (at this time, this workstation OS is not specified) and use it with chan_mobile ? I've read some USB over IP (or Ethernet) middleware exist but I'm not certain I'm looking at the right direction. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I receive this error while compiling chan_mobile: gcc -g -c -fPIC -fPIC -o chan_mobile.o chan_mobile.c chan_mobile.c: In function `mbl_load_config': chan_mobile.c:1745: erreur: trop d'arguments pour la fonction ? ast_config_load ? make[1]: *** [chan_mobile.o] Erreur 1 make[1]: Leaving directory `/usr/src/asterisk-addons' Does anyone know what's the problem? --

hi i look the list at http://www.voip-info.org/wiki/view/chan_mobile i tryed whit an N80 and many non listed phones i cant get any one to work to send sms. someone know a phone thats really works to send sms? wich one? thanks!!! David -- (\__/) (='.'=)This is Bunny. Copy and paste bunny into your (")_(")signature to help him gain world domination. -------------- next part

Hello, I just did a fresh svn install of 1.4 trunk everything. Everything compiles and installs just fine. When I get to asterisk-addons, I cannot select chan_mobile in menuselect. Chan_mobile is not even an option in menuselect for asterisk trunk. I tried the latest patch which failed in many places but did add an option for chan_mobile in menuselect for asterisk but it still cannot be

I have been looking forward for months to get chan_mobile working. I am limited to using prepackaged Asterisk code, mostly Trixbox. I have recently heard that chan_mobile is considered 'beta' and there is no effort to move it into the main code of Asterisk. Not even for Asterisk 1.6. So what is the future for chan_mobile? It is easy to make a very strong case for a cellular trunk.

Hi, I have configured a certified asterisk 13 server with chan_mobile and res_pjsip. I have a Cisco 7940 hardphone and I use ekiga as softphone client. Now the problem is, using the hardphone I'm able to call the softphone and hear everything properly. But when I call from the hardphone to some number that has to be dialed via chan_mobile, I'm not able to hear what the other side says (I

Hello all, I have successfully paired my mobile with asterisk, and chan_mobile already run very well, but sometimes when i restart asterisk chan_mobile fails to initialize with the error: chan_mobile.c: Incorrect voice setting for adapter toshiba, it must be 0x0060 - see 'man hciconfig' for details. I have tried several bluetooth adapters, as well as setting Class in

Greetings chan_mobile users, I have just merged my refactor of chan_mobile into asterisk-addons trunk and now the code needs testing. The changes I have made should improve the stability and reliability of the code and should also improve audio quality. Error reporting should be improved as well. I have tested most of the code with my blackberry device, but I need more people to test the code

I'm finally migrating from the 6/7/05 CVS version to 1.4. Had quite a run, I have to admit. Asterisk itself only segfaulted once or twice, but the dns issues have been bothering me. And the box just needs to go. Everything is going on a Ubuntu 6.06TLS server, that's been perfectly stable. I had 1.4.1 installed and running, but not configured. Yesterday I upgraded to 1.4.11,

Any tip on where to find install doc on chan_mobile ? <http://www.chan_mobile.org> Thnak you! HB -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090911/ba08c4a4/attachment.htm

Hello list, I wonder what are the ideas to improve chan_mobile implementation to make it usb compliant. I am highly interested as a developer and I want to know if there is any initial project. I read part of the chan_mobile source code and a TS of hands-profile-protocol trying to understand better the environment. After that, I started some research about the possibility of doing the same

I have had a search for this, but didn't come up with any results, so maybe I am using the wrong terms, sorry if this is an FAQ. For those who want to forward their incoming voice calls to a mobile, it could be a cheaper option to call a mobile from another mobile on the same network. This probably wouldn't be useful for users in USA, Canada or Hong Kong as costs to call a mobile is

Great for Chan_Mobile and GSM modem for SMS in Kannel or if Asterisk supports SMS over GSM modem. I know chan_mobile had SMS in the future at one point but have not revisited the project since. "America Movil's MVNO TracFone Wireless quietly unveiled a prepaid, nationwide unlimited offering for $45 per month that includes unlimited text messaging and 30 MB of data."

Hello everyone. Does anyone know how to deal with this? i try to change the idea of works revereffect:function but for know unsuccesfull. In my project i have to use dragable with revert: true but i don''t want have revereffect. Maybe any idea? Grzegorz Ślusarek ---------------------------------------------------- HARRY POTTER I CZARA OGNIA - PREMIERA KINOWA 25 LISTOPADA: Wejdź:

Hello, I just installed wine and tried to setup Morrowind with it but installation program fails straight at start as InstallShield can't install something called iKernel. I've installed wine version wine-1.1.12 after several unsuccesfull attempts with latest stable release. The game is Morrowind 3-pack GOTY version - apparently. It contains Morrowind, Tribunal and Bloodmoon in one cd.