Hi, I'm trying to use a mobile phone (ericsson W300i) with asterisk through bluetooth. After some sutrggling, I foun chan_mobile. As some one already used this mobile with what result? I'm considering a simple asterisk system (for home use/test purpose) with : - one SIP service provider (with link to PSTN) - one SIP phone (a softphone on the asterisk box) - one mobilephone (ericsson W300i) let's call it A (for Asterisk) Mobile A is supposed to be connected to asterisk. I want to interact with this system with another mobile B. The idea would be to use free calls between mobile A and B and use the SIP provider mobile B => ..... => SIP provider (low cost call) to PSTN... It is not yet very clear what's working here. I think, I was able to call mobile B : SIP phone => asterisk => mobile A => mobile B and the comunication is started between : SIP phone and mobile B The other way seems more complicated, as I will need to put a password for security but when from mobile B (or a regular phone), I call mobile A, I did not succeed in dialing the password., it looks like nothing is passing by. Maybe I could spy to listen to what's received by asterisk? I'm using asterisk and chan_mobile from asterisk retrieve by svn checkout around 5/1/2008 on a gentoo box. For bluetooth, I have bluez-utils-2.25 bluez-libs-2.25. Should I really update bluez ? To try to get some more debug information I tried : core set debug 4 But I didn't get much? W300i handfreeprofile seems to be on port 4 and it was not detected it was detected (port=0) Here are some config I use : more /etc/bluetooth/hcid.conf options { autoinit yes; security auto pairing multi; passkey "XXXX"; pin_helper /etc/bluetooth/pin-helper; } device { name "Asterisk PBX" class 0x000100; iscan enable; pscan enable; lm accept; lp rswitch,hold,sniff,park; } more mobile.conf [general] interval=10 ; Number of seconds between trying to connect to devices. [adapter] id=intuix address=00:11:67:2E:B4:XX [W300i] address=00:16:B8:5F:C2:XX ; the address of the phone port=4 ;handfreeprofile ; the rfcomm port number (from mobile search) ;port=5 ;headset profile context=frommobile adapter=intuix ; adapter to use dtmfskip=60 group=1 ; this phone is in channel group 1 more sip.conf [general] defaultexpirey=1800 dtmfmode=auto qualify=yes context=default srvlookup=yes register => _________:***********@freephonie.net disallow=all allow=ulaw allow=alaw ; Allow codecs in order of allow=ilbc ; preference allow=gsm allow=speex [sip-out] type=peer host=freephonie.net username=XXXXXXXXXX fromuser=XXXXXXXXX secret=********** nat=yes [sip-in] type=peer context=fromsipproxy host=freephonie.net [1000] type=friend secret=******** qualify=yes ; Qualify peer is not more than 2000 mS away nat=no ; This phone is not natted host=dynamic ; This device registers with us canreinvite=no ; Asterisk by default tries to redirect context=fromsoftphone port=5061 ; Uncomment this line if Ekiga and Asterisk are on the same host more extensions.conf [globals] HOMEPHONE=XXXXXXXXX MOBILEA=Mobile/W300i ;the mobile connected to asterisk MOBILEB=Mobile/W300i/XXXXXXXXX ;the "remote" mobile SIPOUT=SIP/sip-out SOFTPHONE=SIP/1000 TIMEOUT=2 [general] autofallthrough=yes [fromsoftphone] exten => 0,1,Answer() exten => 0,n,Authenticate(XXXX) exten => 0,n,Dial(${MOBILEB},30) [frommobile] exten => s,1,Answer() exten => s,n,Authenticate(XXXX) exten => s,n,Dial(${SOFTPHONE},45) [fromsipproxy] exten => s,1,Answer() exten => s,n,Authenticate(XXXX) exten => s,n,Dial(${MOBILEB},45) Hope someone call help a bit! I'd be gratefull! By the way is there a list of mobile phone (even if unofficial) know to behave well with chan_mobile/asterisk ? I heard that ericsson mobile doesn't behave very well?