similar to: Interoperability between TE412P and Eurotech PRI E1 GSM & CDMA Gateway

Hi, I know there are people with much experience in asterisk, and I want to ask if anyone had experiance with this gw http://www.eurotech-communication.com/products/voip-gateways/VoIP-32-CHANNELS-2E1-PRI-1U/ I'm having trouble getting connect with asterisk anyone has any production? regardss -- rickygm http://gnuforever.homelinux.com

I Ricky I have worked with this gateway few years ago, it's good product, they have gateways with PRI connectors and SIP. The quality is good, and it woks good with asterisk or regular PBXs. On Thu, Mar 26, 2015 at 11:16 PM, ricky gutierrez <xserverlinux at gmail.com> wrote: > Hi, I know there are people with much experience in asterisk, and I > want to ask if anyone had

Hi all I have a server that has two TE412P (T1/E1+DSP) cards installed. One of them configured as an E1 PRI connected to PSTN and another one configured as a T1 E&M connected to Avaya PBX. Each card only uses two ports, so there are 2 E1 lines and 2 T1 lines connecting to this server. The purpose of this server is as a TDM trunk gateway that gets call from E1/T1 and then forward to an IP-PBX

Hi everyone, I would realy appreciate your help and guidense with a problem I have. Im trying to set up a SMS Gateway as a alert system for my network. Although the Aircard is picked up as a usb device and has a driver in the kernel, it does not have a /dev/XXX device name. So my question is how do I create this /dev/XXX device and make it persistent. I have installed CentOS as my base with

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

More than 60% of our outbound calls are now to mobiles, so the time has come to whack in a gsm channel bank. Does anyone have any preference of bank ? Do you use a PRI or VOIP connection from the bank to asterisk ? Real-world experiences are sooooo much better than marketing blurb ;) We currently have a TE412P with a free socket, so we have a choice either way. I am looking for up to 30

It's OT but I thought it was funny enough to point out seeing this is a telephony list...... world wide data.....like the 'world series' of baseball if you ask me :-) Regards, Dean Collins dean at cognation.net +1-212-203-4357 (New York) +61-2-9016-5642 (Sydney) http://www.Cognation.net <http://www.Cognation.net/profile> ________________________________ From:

Hi, Do CDMA phones use the gsm codec? Rgds. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080530/2fe5b269/attachment.htm

The long waited Ultimate GSM Gateway is finally out. This time we have managed to source a new patch of brand NEW GSM Gateway at prices that is only 50% of what the market rate. And with the SMS Function and many more... For purchase please email gsm AT cyper-telecom.net. We accept paypal and bank transfer. Postage is not included. Please notice we have also got the standard Dual Band GSM

Hi, I was able to implement T122p one port PRI and was able to call out, but I am planning to use TE412p (includes echo cancellation) 4 port digital card (PRI), I wanted to know can asterisk support 3 four port PRI cards (12 PRI connections) with proper hardware like dual core quadcore processor and 8gb RAM in one server? Also I was planning to implement using 64 bit architecture with Asterisk:

Hello, I am looking for ideas and suggestions. I want to use a 16 port GSM gateway as a trunk for outbound/inbound. I will also have two PSTN phone lines coming into the Asterisk server. All calls will go to an IVR on the Asterisk PBX. Outbound from extensions will route to GSM-GW when the dialed number matches a pattern set in the GSM-GW trunk. And accordingly for the PSTN trunks. But that's

Is anyone in the world making gsm 'picocells' which could be connected to an Asterisk server and allow gsm mobiles to roam to them (and therefore become just another extension) when in the office? Obviously lots of things to consider (it's a licensed band) which I think was the big holdup last time I asked this question anywhere. I know there was talk about using them on aircraft

Dear Users, I am fairly new to Digium and Asterisk. I wanted to know that if I use the Digium product THREE Digium Wildcard TE412Ps? (Quad E1 Card) how many calls can I handle simultaneously. I want to use the cards with the following Configurations: Intel? Xeon? 3.00GHz/800MHz, 2M Processor 1GB PC2-3200 DDR2 SDRAM (2x512MB + 2X1GB) memory Integrated Dual Channel Ultra320 SCSI Adapter NC7781

Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'.

I'm hoping people can suggest some ideas for debugging a problem that I'm having with DTMF. Unlike most of the DTMF problems reported here, it has nothing to do with Asterisk interpreting DTMF. My problem is with the synthesis of DTMF tones on outbound calls on a PRI connected to a TE412P card. I'm running * 1.4.10.1 with Zaptel 1.4.4. It is important to note that these problems

Has anyone successfully run * 1.4 with the following configuration (or something very similar)? HP DL380 G5 (3Ghz Xeon) CentOS 4.5 (kernel 2.6.9-55) Asterisk 1.4.5 (or 1.4.4) Zaptel 1.4.3 (or 1.4.2.1) TE412P TDM400B (2x FXO and 2x FXS modules) I've had this rig running * 1.2.18 with Zaptel 1.2.17.1 for several months without any issues. Upon trying to upgrade to * 1.4.4 and Zaptel 1.4.2.1 a

From: Mikko Perttunen <mperttunen at nvidia.com> Add an implementation of DMA fences backed by Host1x syncpoints, an interface to specify a prefence for job submissions. Before submission, prefences containing only Host1x syncpoints are waited by pushing wait commands to CDMA, whereas other fences are CPU-waited. Signed-off-by: Mikko Perttunen <mperttunen at nvidia.com>

Colleagues, We're in the process of standardizing on Sprint PCS and Cingular phones on a national basis (~ 50 properties, 1000's of lines). I manage an Asterisk install at one location. I've been looking at the Multitech CellFinder CDMA for Sprint as a dial backup solution. Basically, it's a CDMA to POTS gateway, tied to a PCS account. We would see it as a trunk line and I

Qualcomm CDMA Technologies (QCT) is the largest provider of 3G chipset and software technology in the world, with chipsets shipped to more than 50 customers and powering the majority of all 3G devices commercially available. QCT partners with nearly 60 3G network operators around the globe and has the largest CDMA engineering team in the wireless industry.We are looking for compiler developers.

Hello list, I'm currently looking into building a new Asterisk server, due to some codec problems i've got to transcode most of my channels between Alaw -- G729. Is there any indication on how many channels you would be able to transcode on a certain platform? I'm looking into dual Xeon or dual Opteron configurations, which of these platforms would perform better? And how much power