similar to: Zaptel timer on Intel Dual Core servers

Hi all, on a new installation, HP Xeon at 1,83 with 2.6.18-amd64 image from Debian Etch with Asterisk 1.4.20.1 and zaptel 1.4.11 -both tar.gz from digium- we get: [Jun 11 14:54:29] ERROR[6686]: asterisk.c:2952 main: You have Zaptel built and drivers loaded, but the Zaptel timer test failed to set ZT_TIMERCONFIG to 160. There is no telephony card in the server, we want to use ztdummy for

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

I haven't seen this appear on the list, so I thought I would resend it... Sorry for the repost if it did appear before... ----- Forwarded message from Michael George <george> ----- Date: Wed, 3 May 2006 21:48:09 -0400 From: Michael George <george> Subject: meetme conference latency degrades... To: asterisk-users@lists.digium.com We have recently started making more frequent use

Hello, I have some ugly numbers given by zttest for ztdummy on an AMD64 box running linux-2.6.15 compiled for Athlon64. linux-2.6.15, zaptel/branches/1.2 r900, jiffies ./zttest Opened pseudo zap interface, measuring accuracy... 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

Hi, I'm building a test asterisk server and building the latest kernel I got to wonder if there are any specific recommendations about schedulers and so forth for optimum performance. There are a few areas that raise questions in my mind and I wonder if anyone has any opinions/comments on which settings are most suitable for use with asterisk: SLAB Allocator (SLAB or SLUB?) Tickless

What does it take to get ztdummy to work correctly? I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 1.4.9.2 Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. Problem is playback() does not work. So then I stop zaptel, asterisk runs and playback() now works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for that. I am

We have recently started making more frequent use of the meetme conference of our * system. We are using v1.0.8 with a 2.6.11 kernel on our system. We generally have 4 callers in it: two with the gsm codec and 2 with g729. Initially, the conference works fine and there is little latency. After about 15min., though, the latency is very noticable and by 25min it's unbearable. If we all leave

Hi I am trying to build reliable fax solution with asterisk, iaxmodem and hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3 1.2GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After installing the newest zaptel and wanpipe-3.1.0 beta I did zttest and it didn't give me good results: 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

Hey All, I've been working on trying to get asterisk to play nice under Xen and I've run into a bit of a road block. I'm not using any hardware stuff only ztdummy. First I had issues getting ztdummy to work but that was solved by recompiling the xenU kernel to have CONFIG_CRC_CCITT=y which it was missing. Now ztdummy is seen fine in the virtual machine though when I run

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Hi, I am having problem with my Asterisk installation and find out it has to do with ztdummy. if the ztdummy module is loaded, the asterisk playback() command will not play files. DTMF is still properly received. If the ztdummy module is unloaded, sound playback works again. Here is my version zaptel-1.4.9.2 linux-source-2.6.18 asterisk-1.4.18 Can anyone tell me how to fix it? Or should I

Your Zap conf files would be helpful. Zttest results? Cat /proc/interrupts. Sharing interrupts? Any funky error in the logs? Thanks, Steve Totaro http://www.asteriskhelpdesk.com > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Administrator TOOTAI > Sent: Thursday, May 10, 2007 6:24 AM

I previously had Asterisk 1.0.7 running on a Linux 2.4.x kernel with ztdummy. I was able to do things like meetme and music on hold. I recently installed Asterisk 1.0.9 on a different machine with a Linux 2.6.x kernel running ztdummy. I installed and configured everything the same way, but when I try to call into a conference room I get the error message stating, "that is not a valid

Hello! I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all give the same error) with 2.6.19 kernel CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o In file included from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:

Hi I run asterisk 1.4.2 with zaptel 1.4.1. Zaptel is only needed for the ztdummy driver to get the Meetme() application to work. I don't have any specific hardware. And it does work nicely. When I reboot the machine however I have to manually load the driver like this: [root@vink ~]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device

I'm running asterisk/zaptel 1.4.5. If I load the ztdummy module, the dialplan hangs when it tries to play audio (i.e. Playback) -- and I just hear static on the line. I'm running this on a debian system. I actually have it working on a different debian system but have yet to discover the important difference between the two installations. Any advice on where to look? Thanks John

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

Hi everybody I'm trying to make Asterisk 1.2.1 run under VMWARE and Suse 9.2. I use ZTDUMMY module for timing and ZTTEST gets an average precision of 98,4 %. Is there any way to improve it? Best regards Mauro Zanin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060117/945d544a/attachment.htm

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have: