similar to: Server Compatibility List for Asterisk

Hi All, I have read many posts about problems with Asterisk on some systems. I also set up Asterisk on many different boxes. But I have never seen the following... There is an IBM X346 (3.4GHz Xeon) with one Sangoma A104. This system is currently idle, that means there is nothing running except Asterisk (1.2.7.1). We are handling no calls now, but if I do a vmstat, I get peaks in system load up

im triying to install linux on a IBM x346 thats uses the a320raid driver, this machines has 2 disk as a raid 1 (with W2003 Server)and a third disk for Centos4. when i install Centos its see 3 disk, no the raid, my question is, those grub depends on Linux seing the raid for properly bootup, because when i install grub in /dev/sda i does not load ok. Im triying to setup a dual boot machine as you

Has anyone gotten a transparent firewall working? I''m using snv_125 on an IBM x346 (snv_130 goes into endless boot loops on this hardware). I can create a working bridge with dladm, but can''t stop packets, even with "block in quick all". That stops packets on my management interface bge0, but not on the bridge. :( tim at ghost:~# ifconfig -a lo0:

Hello, I've got a very strange problem. Lately I've been setting up my linux servers for network (layer2) redundancy with a bridge interface containing two ethernet interfaces connecting to two switches. So far I didn't have any problems with it, but now a very strange thing happens with a new server I'm installing. The server is an ibm x346 having two onboard BCM5721 cards, the

I am using DIDx.net as my DID provider but they don't seem to get their act together. A lot of times the phone numbers don't work. How can provide my own DID, my asterisk server is being hosted at a Data center and has a reliable vendor that does my termination and do SIP to SIP and have no T1 channels. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I successfully obtained the Asterisk code and extracted them into /usr/src. When I make and install asterisk, zaptel, libpri etc. Are they supposed to move automatically into their respective directories? I cannot find: /etc/asterisk/ /usr/lib/asterisk/modules/ /var/lib/asterisk Do I have to manually create them or this is failed install? Thanks. -------------- next part -------------- An

I am using Asterisk and A2billing Calling Card Platform and after the 6th call the quality starts to degrade. The way it set up is the user calls into the system then dial out so I have 12 channels being used up but 6 active calls. Here are my specs Asterisk SVN-branch-1.4-r79142 on a i686 running Linux Fedora 6, Pentium 4 Hyper-Threading, 64 bit, 1GB of RAM, 80 GB Sata Drive, bandwidth 4 Mbps

At work, I have 4 branch offices at which I've deployed asterisk. Call termination/origination at each branch office is handled either through a frac PRI or 3rd party SIP provider. Soon, I'll be replacing the legacy PBX at our HQ with asterisk. Each branch office has between 3 and 20 employees, each with their own extension and DID, and at headquarters, we have about 70 people, again

I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does not work with it. It works fine when you pick up the handset. Anyone experinced this problem before, the speaker works fine with Verizon line. The phone is behind a Linsys router RT31P2. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've been working with a telco for the past two days trying to get a PRI span up and running. This is a small-ish telco and I get the feeling they don't do this very often. Anyway, they specified a pretty standard setup: ni2 switchtype, esf framing, b8zs coding, etc. All of my b-channels are up, but we're having a heck of a time getting the d-channel to come up. He finds out that

I have followed all the install note for A2billing and have everything installed and configured and my asterisk works except the callingcard application. Added the following [callingcard] ; CallingCard application exten => 777,1,Answer exten => 777,2,Wait,2 exten => 777,3,DeadAGI,a2billing.php exten => 777,4,Wait,2 exten => 777,5,Hangup I am using 777 as the calling card

Shortly, I'll be purchasing a Sangoma A102. I'm wondering if I should spring for the hardware echo cancellation circuit or not. Upon initial implementation, the 2 T1 Ports will be used as a passthrough as we slowly transition off of a legacy PBX. Eventually, we'll only be using one of the ports, and will be providing VoIP service to a bunch of SIP deskphones. So - with that usage

All - this is probably a simple problem, but I've been pulling my hair out trying to figure out what I'm doing wrong. I'm building a *simple* IVR menu. Here it is: [main-menu] exten => s,1,Answer exten => s,2,SetMusicOnHold(default) exten => s,3,DigitTimeout(5) exten => s,4,ResponseTimeout(30) exten => s,5,Background(logic-main) exten =>

Hello all - I'm about to deploy an asterisk server here at work. Before deploying, I'd like to do an extended load test on the system. I currently have T1 crossover cables connecting ports 1->2 and 3->4. Would there be an easy way to script generating a bunch of calls across these spans? I envision generating 23 calls over the 1->2 span and 23 over the 3->4 span. I'd

I am currently using a T1 PRI from TWTelecom for DID and outgoing calls, but I recently discovered that they're offering call termination/origination over SIP trunks in my area now. If they could deliver these SIP trunks to me over a guaranteed-QoS circuit, this would be of great interest to me. We're already using a DS3 circuit from TW for our internet uplink, so I'd imagine it

I figured it out. The ftp site was not named well and corrected. The other problem I have it after the extraction and make; it was suppose to go under /etc but that did not happen. I am trying to figure out why. On 12/28/07, broadband Voice <broadbandvoice at gmail.com> wrote: > > I successfully downloaded the Asterisk package from Digium but not able > tar zxvf zaptel-*.tar.gz.

Following the successful deployment of asterisk servers at several of our branch offices, in the near future, I'll likely be implmenting an asterisk server at our HQ. We currently have a T1 PRI terminated on a legacy PBX. I'll be doing a stepped deployment in which, via a dual T1 linecard, the asterisk server will initially pass all incoming/outgoing calls directly through to the PBX.

FreeBSD-hubs, a new mailing list, is now available at FreeBSD-hubs@FreeBSD.org. This list provides a coordination point and discussion forum for those individuals interested in providing one of at least 3 services to the FreeBSD community: sup server ftp server mail exploder This list is not the place to discuss setting up private sup, ftp, or mail lists. Please discuss those

Could not find your post for 4 months ago. -------------- Original message -------------- From: "Anton Krall" <akrall-lists@intruder.com.mx> > Yes, check a post that I made about 4 months ago, I posted the cofig for > setting the speaker, handset and ring volumes .. > > |-----Original Message----- > |From: asterisk-users-bounces@lists.digium.com >

Hello - I have (finally) obtained a fair amount of success in connecting my Intertel Axxess PBX to an asterisk box via a T1 PRI. I can place calls from the Intertel side through the T1, out to an IAX2 softphone and the calls get routed correctly and all of the CID information stays intact. However, when I call from the IAX side to an extension which should route back through to the Intertel