similar to: Dial agent channel - busy

Dear The Expert, I am very new with this, I have installed AsteriskNow, X-Lite as my SoftPhone, I am using SPA-3102. I have 3 extensions, me at 250, 998 is my Linksys SPA-3102 and 999 for PSTN Line (see below) My problem is, I am unable to call 998, I thought this is registration problem, (because the Linksys screen info said Registration Failed) Could any body please help? Many thanks in

Hello, everyone. Today I've installed an asterisk svn trunk (r61667). The problem I'm having is no matter what context I set in the config file for that peer, "default" is always being used. The output of "sip show peers" shows the context correctly, but when I try to make a call, using that peer, I can only dial the numbers set in the "default" context.

I recently upgraded from asterisk 1.2.13 to 1.4.2 and am looking at using the users.conf file to setup my users, before i was using real time SIP which worked fine. However when i create a user in users.conf i am unable to register the user form a softphone, however that same softphone can still register a different the users i currently have setup form the sip.conf from real time. i've

Hi, I am attempting to setup an asterisk server, current specs: CentOS release 5 (Final) Asterisk 1.4.11 Asterisk-gui checked out from SVN last week I started with a fairly basic setup involving one VOIP provider who provided one dial in number, and a couple of handsets. Config files are below. It was pretty much totally built by Asterisk-gui, except for the fact I had to add

Update on this: I found that by changing insecure = very to insecure = invite, adding the second trunk no longer stopped calls working. I've read the documentation on this switch and still don't see how it applies/is meant to get used. Anyway, with this change in place, the following may help: asterisk*CLI> sip show registry Host Username

All, I am setting up asterisk on a nslu2 (Linksys) using unslug. Everything is working great except that I have a polycom 301 and I cannot get the message indicator to work. I have created the users and mailbox in users.conf and I can manually dial the mailbox (*986000). Last thing is I am not using config files for the polycom just web browser. Can anyone point me in the right direction I

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

hi, exten =>6000,1,dial(SIP/6000,15,tr) exten =>6002,1,dial(SIP/6002,15,tr) exten =>6004,1,dial(SIP/6004,15,tr) exten =>6006,1,dial(SIP/6006,15,tr) exten =>6008,1,chanspy(SIP/6006 | wbq) when i dial 6008 ,it is connected ,but i can't able to hear the voice of the any one. when coversation between the 6002 to 6006. in my Console mode i got the following comment *CLI>

Hello everyone, I have previously asked this question on the asterisk-video list, but I got directed here. I have a setup consisting of asterisknow beta4 (not sure if that is crucial) and a few clients all running X-Lite 3.0 (not eyebeam) on the local network. My computer has a USB-Camera installed, and now I would like to do some video calling with it, at least, so that the other user can

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>

Kevin Larsen <kevin.larsen at pioneerballoon.com> schrieb: > The phone you gave your wife is really old. Are you sure it supports SIP > OPTIONS? Can you make a call in or out to it? If you can, it is more > likely that it just doesn't support that and you can't use a qualify > statement. No, I'm not sure. And no, I can't make any call, right now... At least,

Am 23.06.2020 16:22, schrieb Marek Greško: > It seems your problems lie in something other. Most probably it is not > mtu problem. All my suspections are contradicted. If it is true you > have inter vlan voice quality problems, it is definitely something > different. Formerly I assumed you were trying only LTE vs LAN using > internet. I'm not sure what you mean with the last

Thank you for your note, Scott. I set rewrite_contact=yes for both contacts, and I also had to do remove_existing=yes because I had to remove the existing contact information (max_contacts = 1 was preventing new contact information) using pjsip qualify demo-alice etc., after which the right IP addresses showed in pjsip show endpoints. Anyway, it works as expected now, I think. My pjsip.conf is

I am following the instructions in https://wiki.asterisk.org/wiki/display/AST/Basic+PBX+Functionality and I am trying to make a call from extension Alice (6001) to extension for Bob (6002). When I make the call, I can hear the ringing on Alice's phone (caller), but Bob's phone (callee) doesn't ring, or show a call coming in from Alice. My setup and environment is as follows: Alice, Bob

Hello mailinglist, I want to connect Asterisk with OpenBTS and make a call with a mobile phone. I use: Ubuntu 11.10 + Kernel 3.0.22 GnuRadio 3.3.0 Asterisk 1.8.13 OpenBTS 2.8 Nokia Mobile Phone OpenBTS works and I can send sms from the OpenBTS server to the mobile phone. What I also need is a call between Asterisk and OpenBTS. I have also two soft phones which works with Asterisk. And also

Is there a way to override sip peers defined in users.conf with respect to their context and hints? Every extension I have defined in users.conf always gets an @default for the hint priority. Below are asterisk outputs and users.conf entries. In peer 1203 I've set a subscribecontext, which is completely ignored. Thanks for any help. nurscarepbx*CLI> core show version Asterisk 1.4.22

Hi, I've just built my first asterisk server. Current information: OS Version: Linux asterisk.visinet.com.au 2.6.18-8.1.8.el5 #1 SMP Tue Jul 10 06:50:22 EDT 2007 i686 i686 i386 GNU/Linux Asterisk Build: Asterisk 1.4.11 Asterisk GUI-version Revision: 1479 $ Server Date & TimeZone: Thu Sep 6 02:37:11 EST 2007 I've used the Asterisk GUI for setup with two IP

I want to include a new context in my exensions.conf I have read this page http://www.voip-info.org/wiki-Asterisk+howto+dial+plan and I can sort of follow it?! I have a context [local] that I know zapata.conf points to, I have edited extensions.conf and put in my phone, sip and iax extensions. I want to add an sms context. I understand that all calls go through my [local] context and I have

Hi SamyGo. Thank you for the replay. So, let me explain it better: I knew that I could use something like " same = n,Dial(PJSIP/6001&PJSIP/6002) ". While every extension (called phones) rings and before anyone answers, SIP 183 messages will be sent to Asterisk from callees. If a called phone answer, the others will be hanged up. It is ok for me. I want to connect the caller just