similar to: autoprovision 200+ linksys phones setup

Anyone have an example XML file for the PAP2T? Cheers, j

I am having an issue with doing FTP auto provisioning of Polycom 501's when they are behind a NAT. If I put the phone on the same subnet as the provision server it loads the configs and changes fine but as soon as I put in behind a NAT it comes up with cannot contact boot server. I have tried behind and replicated this behind a PIX 501, a Linksys SOHO router and a Motorolla SOHO router.

Hi, I have a strange problem. At a site where there are 20+ phones, there is one phone that cannot make outbound (to PSTN) calls. Each call is dropped after 20s with "no response to our critical packet". Calls to voicemail and internal extensions work fine. I understand that everything points to a NAT problem, but I don't understand how it could be because: 1) It does not affect

Hi, I've been trying to fix NOTIFY replies (specifically keep-alives) in 1.4.42 (I can't upgrade to 1.8.x at the moment for various reasons). I've noticed for user agents that have a VIA header with a different port than the port the NOTIFY was sent from, the NOTIFY reply will always be sent back to that port, which is incorrect. (Sonicwalls and other routers love to do this, even

Can asterisk act as a SIP registrar or location server? I would like to be able for a user agent(client) to register with whatever client they are using as "username@domain-name.com". Rather than the entry/username/password that is setup in the sip.conf file. That way a user could log into any SIP enable client and their calls would follow them around. I have read the sip.conf man pages

Hello, a person trying to call me by my phone number is getting the error 488 Not acceptable here. I googled that error, seems like this error is normally caused by a failed codec negotation, though I have no clue how I could have read this out of the logs. Anyway, my setup is as follows: Asterisk 1.8.13.0 - NAT - Sipgate SIP Provider The user calling me is also using Sipgate and is calling my

I have spent the morning on this project, still without success. Summary: Yesterday I inadvertently unplugged my Grandstream phone. I might add I did a rebuild of my s/w from CVS at the same time. Since then, the Budgetone seems to talk SIP just fine, but the RTP being sent to it by asterisk "doesn't make any sound." It was suggested I do a factory reset of the phone, which I

Hi all, I am looking for phones witch support POE, with a good relation between quality and price to work with asterisk. I just see the Thompson st2030 and the Linksys SPA 922 an SPA 942. Witch of this phones or another ones gave you the best results in a productivity enviroment? Thanks in advance. VoipCrazy. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi people, I'm having problems of connection with a Linksys SPA IP PHONE 942 when I use the WAN port, most of the time when I try to connect to the network or restart the IP Phone I can't get internet connectivity . I tried using both static IP and DHCP, but the problem is the same. Some have had similar problem with this brand of IP Phone? Thanks for the help and attention. Hugs

I am unable to get a my Draytek working with our Asterisk server. I can make/recieve calls but get no audio. I have tried the various codecs at the Vigor end but still getting nothing. I looked at sip debug (below) but am new to Asterisk and don't really know what I am looking for. Asterisk works fine with XLITE so I know my installation is ok. Sip read: INVITE

Surely there must be someone here who can help me with this problem. I have spent weeks trying to get this damned service to work with no luck. I have incoming calls working, but no outgoing. If get outgoing working then incoming don't work. I have sent this problem to this list a couple of times with little or no response, and I _really_ need some help to sort it out. I have an asterisk

Hello. I've got a Cisco SPA303 that I'm trying to provision via http. I noticed that this device looks very similar to a PAP2T, so I used that as a template for my provisioning file. However, the result is less than stellar. Line 1 registers and works. However, lines 2 and 3 also register as line 1, effectively giving me a 1-line phone with 3 buttons. Also, the line name is the

Victor Hoodicoff wrote: > > > I think your impressions of Aastra are outdated. Install the latest > firmware, download the latest documentation and test and THEN give an > opinion! Did you miss the part when I wrote I have Asstras sitting on my desk collecting dust. I program on average about 5 per month, deal with about 40+ per day. They're as impressive as that Hyundai in

Greetings list, We recently installed some Linksys SPA962 + SPA932 sidecars into a client's offices. The BLF functionality works fine, but call pickup using the BLF is something of an issue. Following the advice on voip-info.org, I configured part of their dialplan as follows: exten => _**2XX,1,Pickup(SIP/${EXTEN:2}) exten => _**2XX,n,Dial(SIP/${EXTEN:2},15,tw) exten =>

Anyone else have problems with phones like SPA-922, SPA-921, etc? Inbound audio is perfect but the remote end reports audio quality issues on the audio the handset is sending out. It's not the network.... I've tried asterisk 1.2, 1.4. I've used ulaw, G726, G793 & G729. Ulaw seems to be the least problematic but its still an issue. Doesn't matter if we send the calls to the PSTN

We have two Linksys 942 phones which sound great when they call each other directly through Asterisk. But when they both dial in to a meetme conference room, the sound is very jittery. Other phones like Polycom 501 and Snom 360 sound fine when using meetme. Both Linksys phones are set to use the default g711u (ulaw) codecs. Adjusting the jitter buffer and jitter level settings to various values

Does anyone have any recommendations for a phone that has easy to understand/implement central provisioning? I've used CISCO 79XX phones, and they're great (but too expensive). I like Grandstream phones, but their provisioning sucks. What is everybody else using in large environments where individual config is not an option? ---------------------------------------- Rod Bacon

Hi, to register my Asterisk with a SIP provider I use the following syntax, as shown in the default sip.conf: register => 2345:password@sip_proxy where [sip_proxy] type=peer context=from-messagenet host=sip.messagenet.it port=5061 <------------- please note this one!!! 5061 is provider's port I have to register to. This also would work for me: register =>

I want to setup a blind transer for auto forwarding to SIP peer. I have context forwarding looks like this in extension.conf [forwarding] ... exten => 511,1,Dial(SIP/sip_proxy-out) ... This will do the re-invite, which is attendance transfer maybe. But I want a blind transfer by REFER method. How can I do that? I know that the transfer() function may be able to do that. But I don't know

sip.conf.sample: ;register => 2345:password at sip_proxy/1234 ; ; Register 2345 at sip provider 'sip_proxy'. Calls from this provider ; connect to local extension 1234 in extensions.conf, default context, ; unless you configure a [sip_proxy] section below, and configure a ; context. sip.conf: [general] context=default allowoverlap=no udpbindaddr=0.0.0.0 tcpenable=no