similar to: Cisco 7910 Handsets: Skinny protocol?

Dear All, Thank you for taking the time to read my message. I have just installed Asterisk Now, and it seems to be up and running with no issues on my system. The problem I am facing, is that I cannot find anywhere in the web interface, to assign phones. I have a CISCO IP phone 7910 series, and I wish for this to connect to the asterisk box. What's the best way of going about this?

I have a bunch of 7910's that I managed to get registered with Asterisk 1.2.14: managed5*CLI> skinny show devices Name DeviceId IP TypeId R Model NL -------------------- ---------------- --------------- ------ - ------ -- test7 SEP0004C1878F8E 192.168.0.226 6 Y 7910 1 The problem is that the phone resets when I attempt to make a call from it or place a call to it. If I pick up I have

Can skinny work behind NAT? I have a Cisco 7910 using SCCP behind NAT that has one way audio. The called party cannot hear the calling party who's using the 7910. skinny.conf ; ; Skinny Configuration for Asterisk ; [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 0.0.0.0 ; Address to bind to dateFormat = M-D-Y ; M,D,Y in any order (5 chars max)

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

At the present time you have to have a VALID ip address in bindaddr for Skinny to work. If bindaddr is either 0.0.0.0 or simply commented out all packets requiring the IP address contain 127.0.0.1. I forgot their nick, but someone in IRC recommended we make Asterisk be smart enough not to pick that interface, but I'm not sure of that is the problem or not. I simply have not had the

Hi, I have one Cisco IP Conference 7935. I'm trying to config the SKINNY Protocol. I config the skinny.conf file same like sample for Cisco 7910. When somebody call me my phone ring and answer the call but I can't hear anything, But the other people is hearing me very good. When I try to call somebody the * show me an error : RECEIVED UNKNOWN

If you have been paying attention, you already know this, but this weekend I have spent time ironing out the various details with my chan_skinny code that has been out there, if you knew where to look. I believe I now have all basic features operational and am going to be working on getting the class 5 (hold, transfers, call waiting and caller*id, etc) operational in the comming week(s).

I have a cisco 7910 phone, I'm trying to get it to connect to asterisk, But it seems like it needs either a SEPDefault.cnf file or a SEPMACADDR.cnf file to Continue, I created empty ones but it's still sitting there saying "opening" Does anyone have examples of the SEPDefault.cnf file? Kevin,

Thanks for that, it IS appreciated - but, everyone, can we please not argue this matter any more. Some see it as top posting - some don't. I really don't care either way. No if we could just get back to the subject in hand and not clog up this list with flames. Thanks Andy -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at

I am replacing a dead pbx with *. There are four lines I will be using. There is a Cisco 827-4v already in place so I will move the lines from the pbx to it. I am working with Cisco 7910 phones and I understand they use the Skinny/SCCP protocol. I am not sure if I should use chan_skinny or chan_sccp? However my main question is with communication. Do I need to use the same protocol between the

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Hi All Will cisco 7910 ip phone compatible with Asterisk? I know that 7960 are fine. David Kwok -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 1878 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040112/e8023f35/smime.bin

Hi everybody !!! I'm a french student working on an Asterisk's projet . I think it's very easy for you : configure 2 CISCO 7910 and Asterisk in order to make call between both. (Scuse for my poor english ;) ) I have install Debian and Asterisk thanks to the CD Xorcom Rapid. I have set-up DHCP and TFTP servers for the IP phones. On the tftp, i have put the *.bin files for my phone,

I've looked on Google, but I get mixed results. I understand the 7910 does not support SIP, instead using SCCM, but does it work reliably with Asterisk? Is there a specific firmware revision for the device that makes it work? If anyone has this phone working with Asterisk, I would be interested to learn about the configuration. David

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

Hello. I have just installed Asterisk on my HP DL140 Fedora Core 1 Server. The server has two interface cards active. I have been unable to fix this error although all DNS lookup works fine. my /etc/host.conf contains order bind,hosts /etc/hosts contains # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1

Hello, I'm looking at getting some Cisco 7910G+SW phones through a local liquidator. Is anyone currently using these with asterisk? Any special limitations with this one as compared to the 7940 and 7960's? Will they work with SIP or are they stuck in Cisco-land with Call-Manager only? Thanks, MATT---

Ok, Skinny gurus. (btw, I'm super pleased to see development happen on this). Thoughts on this?? I added this context to my skinny.conf: [ppc] device=SEP00022D494F2A context=employees line => 50 ; Dial(Skinny/1@ppc) I've downloaded the 30 day Window eval of VTGO! (PPC) from www.ipblue.com and it hangs on Registering. *CLI> skinny debug Skinny Debugging Enabled

I'm looking for a usb cordless handset to pair with a softphone ( probably ekiga) on a pc linked to an asterisk server. I've loooked at the bluetooth headsets, but they seem overkill for just home phone extensions. I've found a number of handsets that work with skype, but they seem locked into skype. I've also found the Uniden WIN1200, which works with MS Messenger. It

Hi, I need to subscribe and use several Polycom-Kirk 5020 handsets along non-Polycom-Kirk handsets on a one-cell Polycom-Kirk 600/3 base station. Has anyone tried this ? Which values did you pick for Subscription mode (with or without Account Code) and IPEI ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: