similar to: Incoming calls on PSTN trunk not disconnected (bsnl, india)

Has anyone figured out the way of getting the caller id for BSNL on Asterisk 1.4.2 I have tried following link http://bugs.digium.com/view.php?id=6683&nbn=24 but was not able to get it, although did not ge any error too. I always get the caller id as asterisk. Can someone please help. Regards, Sanjay Rajdev

I cant seem to get outgoing calls to be placed properly .. No matter what I try I get an error from the PSTN company saying that the "call can not be completed as dialed" or "you need to dial a one..." The asterisk debugging seems to show the correct number being dialed out of the zap interface... the "9" is being stripped and there is a "1" where it is

Hi i've got an openvox a800p01 with 1 FXO and 4 FSX i've done the following: - downloaded zaptel-1.4.7.1 > >> - downloaded the file opvxa1200.c > >> - copied in zaptel-1.4.7.1/ > >> - edited makefile adding opvxa1200 in the modules and the voice > >> opvxa1200.o : zaptel.h wctdm.h > >> - edited zaptel.sysconfig adding MODULES="$MODULES

Yo! I changed callprogress to no, and in wcfxo.c source around line 334 i changed the value 32000 and -32000 to 10000 and -10000 because it had something to do with the DC voltage when it was ringing. I found reference here (http://www.voipuser.org/forum_topic_1791.html) with an interesting diagram of wiring that was incorrect for sending voltage to a phone or something like that. So put it

I am using Elastix. Asterisk is used for PBX application in Elastix. I want to make customize MOH. But not able to use MOH. I make simple extension in asterisk conf file but no success :( But when I used Vanilla Asterisk then All things are working.... Below are the details of configuration files. Even default MOH is also not working.... *Asterisk Version 1.6.2.17.2 * *1) Extension.conf*

I am using Elastix. Asterisk is used for PBX application in Elastix. I want to make customize MOH. But not able to use MOH. I make simple extension in asterisk conf file but no success :( Below are the details of configuration files. Even default MOH is also not working.... *Asterisk Version 1.6.2.17.2 * *1) Extension.conf* [incoming] exten => 6000,1,Answer exten =>

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having an annoying issue with the FXO ports. As soon as I plug either one into the phone line it's as though the line is disconnected i.e. get disconnected tone when trying to dial out, line is busy when dialling in. The CLI shows the following: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11*

please help!!! I am dialing into our asterisk server(TDM400p) from the psnt. I hear our voicemail message and I press the extention 1000. The Polycom ip phone in the office rings. I pickup but neither side can hear one another. What have I done wrong? thanks sip.conf: [general] context=local-access ; Default context for incoming calls bindport=5060

Hi, We have two internet connections and I would like to loadbalance between the two using advanced routing. The gateway machine to my lan has two interfaces, one connected to lan(eth0) and other to wan (eth1). The wan side interface is connected to a switch which is terminated with two internet connections from two ISPs. I have added the routes as follows, ip route add default scope

Hi, I am setting up an asterisk server for testing purposes and cannot get voicemail to work at all. My host OS is Linux From Scratch 6.3 and the asterisk software versions I built are zaptel-1.4.5.1 and asterisk-1.4.12. I am using the Ekiga softphone on my Ubuntu desktop machine. My asterisk server and client phone are on different computers but are on the same LAN, i.e. no NAT. I have an

I'm trying to setup a demo where my Asterisk box with a TDM01B (FXO) answers an incoming call and forwards that call to a SIP softphone (X-lite.) Seems all is built/installed okay: # ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. I'm pretty new at this and the extensions.conf file is eating my

Hy, I'm writing from Spain. I have the 1.2.4 asterisk version and 1.2.3 zaptel version. I've heart that this asterisk's version detects correctly de hang up of PSTN, but in my case this thing doesn't happen. Moreover, my asterisk sends the next messages in the CLI: Feb 21 15:03:13 WARNING[10363]: chan_zap.c:10876 setup_zap: Ignoring signalling Feb 21 15:03:13 WARNING[10363]:

Hi, I have problems while trying to dial from simple analog phone that attached to my TDM400P card. No matter which number i press i immediately get a congestion tone. when calling from outside (e.g cellphone )to the line on port 4 and pressing extension #123 everything works fine and i manage to make a connection. I've plugged on port(Zap) 4 the analog line and on port 1 the phone.

I have a normal backup phone (and an alarm panel) sharing the POTS line with the Digium X101P FXO: | | Wall |>---+------X101P FXO as Zap/5 | | | Phone & Alarm Whenever the Phone is used, Asterisk sees a 'false ring' signal immediately when the phone is hung up. The Alarm panel dials out nightly at around 1AM, and each time it completes the call, Asterisk

I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS). These connect to a Digium TE210P card. I'm running kernel 2.6.10 and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today. The results are the same for all versions: Right after I reboot, and modprobe wct4xxp, my analog phone connected to port 13 of the first channel bank (first FXS port) gets a dial

I am getting zero interrupts for a new Digium TE134 Card on a new brand new Dell T40 server with the latest BIOS. Is there something that I am missing or is the card not compatible with Dell servers? (cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0 16: 0 0 0 0 IR-IO-APIC 16-fasteoi i801_smbus, wcte13xp0 16: 0

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

Hi, I have 6 Red FXO with TDM2400p in my PC. I have install asterisk and dahdi driver. Scenario is jitsi-----> asterisk server-----> analog PBX ----> landline phone I configured this scenario as follow in chan_dahdi.conf file ; General options [channels] usecallerid=yes hidecallerid=no callwaiting=yes threewaycalling=yes transfer=yes