similar to: Zap Issues

Hey everybody, I've, within the last 3 weeks, moved over to a PRI from SBC/AT&T. I've received several complaints about dropped calls. Reviewing the archives on PRI and dropped calls shows that I should set the resetinterval=never in the zapata.conf and restart. This hasn't helped. The dropped calls have to date only been on outbound calls. Usually within 2 to 3 minutes

I have a user who's system crashes on pri hangup request. Tried 1.4.19.1 and 1.4.20 as well as the latest libpri no change Progress is as follows...... < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 025 P/F: 1 < 0 bytes of data -- ACKing all packets from 24 to (but not including) 25 -- Since

Hi, all. I've got app_rxfax going and nicely receiving a fax, which I then throw to a script, and have it convert it to a PDF and mail it. Works great... a lot of the time. But a fair bit of the time, rxfax throws errors, and extensions.conf seems never to invoke my script. Here are the pertinent lines: exten => _6403,n,rxfax(${FAXFILE}) exten =>

Hi, Does any one experience that SIP phone to SIP phone (Polycom phone) calls can't hear each other, but Monitor application records both end's voices. It also happens in group pickup calls. Zap calls to queue (Local channel) also experience this problem (sometimes, our SIP phone can't hear any voice from incoming Zap calls when pickup, sometimes this happens after 10-50

I?ve got an interesting problem and am wondering if anyone can shed light ? I am running Asterisk on RHEL Server release 5.2 connecting to an Avaya Definity G3R via a Digium TE220. Asterisk 1.4.20 Zaptel 1.4.4 Libpri 1.4.4 MySQL 5.0.45 Festival Speech Synthesis System: 1.95 We have about 4200 accounts in a MySQL db. Asterisk retrieves the user information from the database, festival tts says

Hi, I have debian etch 4.0 machine (2.6.18) with two TW-ISDN PCI (Hfc) cards. I use bristuff-0.3.0-PRE-1y-e (asterisk-1.2.17,libpri-1.2.4,zaptel-1.2.16). I also have patched zaphfc with zaphfc_0.4.0-test1_florz-13.diff.gz (I load module: insmod /usr/src/bristuff-0.3.0-PRE-1y-e/zaphfc/zaphfc.ko modes=1 debug=1). So i want to test two cards and make loop between them. So one card would be NT,

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

Just did a complete cvs checkout (Sep 4, 9:30am cdt). Seems any attempt to dial out via a tdm04b (fxo) now fails. Does not seize the pstn line. CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo inbound-bus-x10 en default 1 inbound-home en default 2

Hi guys, I am trying to use DISA. The scenario is - I call my home number (where X100P seats) from mobile phone, enter the password, enter international number and get connected via voiptel. It works perfectly when I call extension setup with DISA from X-PRO SIP phone, but when I dial into Zap, It seems that it does not detect DTMF tones. Here is a log and config files Please help

I must be doing something stupid, but I can't figure it out. I have three PRI lines connected to Asterisk, one from the phone company, and two more connected to PBXs. Asterisk uses the incoming DID information to decide which PBX to route the call to. Should be simple. Asterisk is clearly getting the caller id info from the phone company: -- Accepting call from '512345xxxx'

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is to send all my call to the pstn on A104D? The pstn am

hi, after upgrade from 1.0.x to 1.2.x i cannot send faxes my topology: PSTN<-wct4xxp-asterisk- -sip- ata (ht496,ht488,asus vp100) - samsung sf2500 fax log: Feb 13 23:50:35 DEBUG[27914] chan_sip.c: Allocating new SIP dialog for 20d700003cb20000@192.168.1.209 - INVITE (With RTP) Feb 13 23:50:35 DEBUG[27914] chan_sip.c: **** Received INVITE (5) - Command in SIP INVITE Feb 13 23:50:35

Hi list, I'm getting an error on a E1 link to the telco, after some weeks of operation without trouble. I have an asterisk with a TE405 in passtrough mode: two E1 are connected to the Telco, two E1 are connected to 2 Siemens PaBX. Only 15 channels are used on each E1 (conf is attached).The system has been in production for nearly a year, and does work flawlessly for weeks, then I

We have an asterisk box with the following configuration: - AMD Athlon XP 2400+ - 512 MB RAM - SUSE Linux 10.1 - a Digium card TDM400P with 3 FXO - another Digium card TDM400P with 4 FXS - asterisk 1.2.7.1 - zaptel 1.2.4 I already checked that those cards aren't sharing interrupts (by cat /proc/interrupts): 0: 14119786 XT-PIC timer 1: 10 XT-PIC i8042 2:

Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX -> dependencies missing: and this is the message for it, as an explanation. Zapata Telephony

I have spent some time this morning trying to add an Astribank to our current Asterisk, but it failed, so I just removed the hardware, restore the config files to the original setup and started asterisk.; I could see that no Zap channels are started so I did load chan_zap.so: pbx*CLI> module load chan_zap.so [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application: Already have an

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

Hi all, I must admit that I am stuck. I have a TDM400P card with two FXS and two FXO modules which I had set up and configured so that it was working beautifully. The only problem was that occasionally it would get itself into a state where outgoing calls would simply be met with a very loud static. A reboot would fix this issue and everything would work fine for a while. Recently however,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i'm new to * I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; when i try to call outside i get: -- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024 -- Executing Dial("IAX2[pippo@pippo]/2", "Zap/g1/0123456") in new stack Jul 13 13:42:49

About once a week or so my Asterisk box stops responding to all phones. I can pull up the console, do whatever I want at the CLI but the only way to get things working again is to restart Asterisk altogether. I finally cranked verbose & debugging way up (and watched my log files go from 1mb/day to 100mb/day), but below I believe contains my problem. The next line is 1.5 minutes later where I