similar to: Zaptel FXS Cards - Station Distance

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200

I have a pair of Asterisk servers which are happily routeing VoIP calls. I want to hook one of them to the PSTN. Given that I am in the UK, what is a reasonably easily-available device to provide an FXO interface from a Linux box, with a minimum of faffing around with drivers? Just one line is needed, though in theory two might eventually be useful. My usual white-box hardware suppliers don't

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

Is there any product that's a single port mini-PCI FXS card? I'm aware of the Openvox A400M <http://www.openvox.com.cn/products.php?genre_id=39>, but I really only wanted one port. How about a single or dual port PCI or PCI express FXS card? Basically I wanted to build a small linux router with one or two phone ports. Alternatively, is there already a router or single board

Howdy. I've been having trouble finding a fairly modern server that meets the following requirements: - Molex power connectors (don't want to use the Digium FXS power supply) - 4 PCI slots, one full-length (TDM2400P, 2xT100P, additional NIC) - dual power supplies - preferably dual CPUs >= 1GHz - preferably rack-mountable (3-4RU) - CentOS-friendly We'd also like to stay away from

Greetings list, I've been asked to provide a system for 200 extensions, most of which will be existing analogue POTS handsets, not IP handsets. I've not really had any experience with large channel banks in the past (since most of our deployments are strictly IP-only to the desk), so I'm at a loss as to which ones are worth looking at. If anyone's had experience using channel

Hi, I have had this issues for ages but have ignored it, but my handsets get faint background crackle on the FXS port. When I connect the handset directly into my PSTN, it goes away complete, so I am generating this from somewhere in my asterisk box. I get it immediately when the phone goes off-hook and it stays through the dialing and call progress. I can't think of any other devices

Hello, I'm running * on a very basic configuration. I have a Wildcard TE405P with the first T1 connected to a PRI line and the remaining three to Adtran TA750 channel banks with FXS modules. I successfully configured everything to work with a couple of Swissvoice IP10S handsets (MGCP) and analog extensions connected to the channel banks. The problem I'm having is that when I pick up any

I didn't see this answered in the FAQ, and it's important to one of my application owners. How does RSYNC handle open or write in process files? Thank you! J jadams@molex.com john.adams@molex.com CONFIDENTIALITY NOTICE: This message (including any attachments) may contain Molex confidential information, protected by law. If this message is confidential, forwarding it to

Hello list- I'm having an extremely odd issue with an installation of mine. The system is running * 1.2.12.1 and currently handles around 100 handsets. With the exception of a few Grandstream DTA's, all devices are Polycom 320, 430, or 601's. After a recent power outage, I'm having an extremely odd issue with one of the handsets. One of the Polycom 601 units simply reboots every

I now have an OpenVox A400P and it is working well. Thanks to Ade Vickers for the recommendation, which I second. However, I need to make a slow transition between a conventional multiple-extension setup and a full VoIP network on these premises. So at the moment the Asterisk box shares the PSTN connection with several conventional analogue handsets. The desired result for an incoming call is

My analog card, uses a PCI slot and a 12V power connector, is configured with 2 FXO and 2 FXS modules. I can ring handsets connected to the FXS ports but I can't dial out from them. Is extensions.conf where I need to make changes? [root at robin asterisk]# cat chan_dahdi.conf [trunkgroups] [channels] [phone](!) usecallerid = yes hidecallerid = no callwaiting = yes usecallingpres = yes

Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot). It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came

Hi All; How to increase the waiting time between entering the digits for the analoge phone device that is connected to fxs? Is it by DigitTimeout? But how it will be apply for analoge station if the user just pickup the handset and dialed the number? Any help? Regards Bilal

Hello All, Anyone who has experience using Digium analog card clones from any of the following: 1. Zycoo 2. CTVON 3. Chinaroby 4. Etross 5. Immediate IT (IIT) 6. Realtone and can give review which one is good quality with easy configuration and error free running. Also since some of these manufacture only analog cards, does anyone have any experience using these in a single system with digital

Greetings again all, With the help of another list member I was able to get the my TDM400P card working properly (and the PRI card loaded too for channels 1-24).

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

I am configuring an asterisk server and I want to test the incoming configuration with my FXS handsets. I have the FXS lines able to call eachother and they can connect out the FXO lines. I changed the context for the FXS lines to "incoming" so that they would be able to test the setup for incoming calls. For the incoming context I have: [incoming] exten => s,1,Wait(1) exten