similar to: 1.4.?? or ZapTel 1.4.X DIGITAL Calls are Broken

I have a legacy ISDN PBX (Network Alchemy Argent Office) connected to Span 2 of a Digium Wildcard TE205P. Recently Calls from this PBX have been failing with ISDN Cause Code 38 (Network Out of Order!). The problem seems to be getting worse and is now effecting more calls than not (although this could just be because I'm aware of it). Once the ISDN PBX has decided the Network's Out of

Eeeeck! Asterisk is inserting random digits in dialed numbers. So far I've seen it insert a 2 after the STD (area) code and insert an extra 6 or 7 in the STD code. It's pretty repeatable although the inserted number changes. My Config is: Asterisk 1.4.5, Zaptel 1.4.3, Digium TE205P (rev 02). There's an ISDN PBX on the second span and a BRI euroisdn on the first. Calls from the

I'm trying to keep the DND status of my Snom phones and the astdb in line but I'm stuck on integrating my gui DND button which talks to * using the manager interface (actually it uses Astmanproxy as the gui host is on a different network to asterisk and can't see the Snom's across the network). All's working fine in my Dialplan; when someone dials the code for DND-on or

Hi All, Has anyone hooked up * as an extension/trunk of an Avaya system that has around 2 ISDN30e's. Trying to add 100 extensions to one of our systems, but not sure where to start reading. Thanks. -- Kind Regards, Gavin Henry.

Once in a while, someone mis-dials when transfering a call on their Snom SIP phone (using the Transfer button). Instead of sending them to, say, 1940; they mistype and enter 194 or 190 or somesuch. This ends up on the PSTN (for which three digit calls are valid); not what anyone wanted. On our old PBX (Network Alchemy Argent Office) there was a dialcode that grabbed back the last call that went

Quoth Steve Murphy... >Date: Mon, 12 Jan 2009 08:51:03 -0700 > >QUESTIONS: > >Which of the two would you see being useful to you? Obvious comment really but given LEG based CDR, one can determine the 'Simple' data but you can't work it the other way. I'd therefore find LEG based CDR more useful as the granularity (time on Hold, in Queue, Waiting on pre-xfer ring

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

I have two Asterisk systems that can route to each other via a VPN with firewalls disabled for testing purposes. Each Server can see (tested via nmap) UDP port 5060 on the other. So... I thought that I could simply use a Dial command in Server A's config to place a SIP call to Server B... but it doesn't seem to work. Server A (192.168.1.33) has: exten => *136,1,Dial(SIP/90 at

Is there a SIP header I can set (for Snom and Yealink phones if that's relevant) or any other mechanism to tell a phone to ignore a particular call from it's missed call list? I have bits of the dialplan that ring groups of phones eg: exten => 200,1,Dial(Sip/112&SIP/113&SIP/114) and I don't want such calls being recorded by the phone as a missed call. Calls to the

Does anyone have any suggestions for a decent receptionists phone? Aastra? Grandstream? Something with (potentially) lots of BLFs, large(ish) screen, headset and most importantly the ability to transfer calls? I've installed five Snom 370s that seemed ideal but my client is very very unhappy as the Snom 370 can't transfer a call correctly if there's another call coming in (details

I've just started deploying these (well the T28P model) after years of Snom issues and they look pretty good (although the documentation is execrable; if you thought the Snom stuff was obtuse Yealink have got them knocked into a cocked hat!). Anyway, for provisioning I use HTTP with a DHCP entry like:- # # Yealink Phones # group { #

Hello Happy New Year to all!! I've just completed porting from Asterisk 1.2 to 1.4. I did this by doing a clean install on a new box, and moving over configuration and scripts where needed. All went surprisingly well! Anyway, one lingering issue is that the function key "lamps" on our Snom phones have all stopped working! We're using a mix of Snom 290/320/360 phones and

I'd like to be able to generate a Manager Event from the dialplan but can't seem to find a way to do it. Alternatively, trigger and Event when a record in AstDB gets changed. Can anyone point me in the right direction? Thanks. By way of explanation, I've a app that connects to astmanproxy and I'd like it to know when a call group gets put into Nightservice. Putting the call

cdr_mysql doesn't set the userfield when it's set inside a macro called from a feature (1.4.25, addons 1.4.8). I have a feature code: autorecord => *1,self,Macro,apprecord The apprecord macro looks like: [macro-apprecord] exten => s,1,Playback(beep) exten =>

Quoth Jon Morgan <jon.morgan at motors.co.uk> > >We have a 2 port Digium TE220P card, one span is configured to connect to our ISDN30 provider (British Telecom), the other span connects to our internal PBX. Here's the zaptel.conf snip: > >span=1,1,0,ccs,hdb3,crc4 >bchan=1-15 >dchan=16 >bchan=17-31 > >span=2,0,0,ccs,hdb3,crc4 >bchan=32-46 >dchan=47

Hi I have looked through the wiki and search the mailing list, but I cannot find a way to intrude on a call, can asterisk do this feature? if so how? Thanks for your help Robb

Can anyone help with the use of regexten? (* 1.4.3) I've got Asterisk creating extensions for my SIP phones using regexten but I can't seem to figure out how to make use of them once they're registered. Here's my dialplan for from-sip (the SIP's default context): asterisk*CLI> dialplan show from-sip [ Context 'from-sip' created by 'pbx_config' ]

This is concerning an Asterisk 1.4.18 server. We have approximately 70 DID numbers. Incoming calls are placed into the "incoming" context (by zapata.conf) and are routed based on the dialed number. I want to do some manipulation (CallerID name override) to all incoming calls before they are routed. I would prefer to avoid duplicating the necessary code in each DID extension stanza,

I'm seeing both inbound and outgoing call failures on our ISDN-30 lines that only seem to go away when I do a "zap restart" or in extremis restart Asterisk (1.4.25 with a Digium TE205P and zaptel 1.4.12.1). If I don't restart zapata or Asterisk the problem rapidly get worse :-( The lines are from BT with LCR from Cable&Wireless (I've tried using the LCR bypass code and

On Wed, Aug 8, 2018 at 1:53 PM, Daniel Journo <dan at keshercommunications.com> wrote: > > Prior to a call entering a Queue, I set __DYNAMIC_FEATURES=NewRecordApp. > > AgentA answers and is able to use that feature code. > > If AgentA performs an attended transfer of a call from a queue to > AgentB, the > > feature code no longer works. > > > > It only