similar to: OpenVox A800P01 and ZT_CHANCONFIG failed

Hi i need to install a server with this hardware: 1 OpenVox B800P 1 OpenVox A800P01 4 OpenVox FXS-100 FXS100 4 OctWare SoftEcho SOFTECHO Do you suggest 1.2 or 1.4 branch? Is now 1.4 stable ? I've tried 1.4 the last year but i've experienced many problems with misdn drivers. Thanks -- /*************/ nik600 https://sourceforge.net/projects/ccmanager

hello, all of users: there are header files missed when you compile dahdi with kernel-2.6.29 or 2.6.33. i believe that few files are affected: wctdm.c dahdi-base.c wcb4xxp/base.c, opvxa1200.c... the errors look like these: ================================================ from?/usr/src/dahdi-linux-complete-2.2.0.2+2.2.0/linux/drivers/dahdi/dahdi-base.c:61:

Hi, I have a B410P card with bri_cpe signalling and two Openvox analog card (A1200p, A800P) with fxo_ks signalling. From the ISDN we have Point-Point 10 connection with a 10 public phone number range. If I receive a public call, the asterisk recevies the last two digit from this range, so it works, I can receive all the 10 numbers. If I'd like to dial from an exten which I have to

Hi, all My Asterisk uses a Digium TE120Pand I would like to add an Astribank zaptel_hardware sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+

no matter which way I have my /etc/zaptel.cfg this only started happening after a yesterdays CVS update to my zaptel source... Line 1: fxoks=1 Line 2: fxsks=2 Line 23: loadzone=us Line 28: defaultzone=us <End of File> Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels

I get this error no matter what I do. I've tried switching to different locations on the TDM400p to no avail. I've got the card setup with the green module in slot1 and red in slot2. My config files are exactly like the "Configure Dev-Kit PCI (TDM11B)" example. http://www.digium.com/index.php?menu=configuration#TDM11B When I run ztcfg -v, I get: 2 channels configured.

Hi, I a new user of asterisk, I'm trying to in install zaptel drivers on my ISDN card Digium Tiger 3xx TE110P. And my configuration is # # Zaptel Configuration File # span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = it ; ; ; Zapata Configuration file ; [channels] immediate=no switchtype=EuroISDN signalling=pri_cpe pridialplan=unknown context=incoming usecallerid=yes group=1 channel

//////////////////////////////////////////////////////////////////// Hello to all, I have a question. I am installing te110p, when I give ztcfg him - v leaves the following error to me ZT_CHANCONFIG failed on channel 25: No such device or address (6) - That means east error? - It is a physical damage of the card? Thank you very much

Hi, I'm tring to setup a ISDN HFC card in NT mode, but I have a problem with ztcfg that always report a problem regarding FXS/FXO signaling. Is someone have ever seen this ? Loadind the zaphfc module seems ok.... -- insmod ./zaphfc.o modes=1 ------------ zaphfc: card configured at mem 0xc89eee00 fifo 0xc29e8000(0x29e8000) IRQ 19 HZ 100 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci

I'm trying to use ztcfg with the following zaptel.conf: span=1,1,0,esf,b8zs bchan=1-4 nethdlc 5-23 dchan=24 and I get "ZT_CHANCONFIG failed on channel 5: Function not implemented (38). This is on Debian 2.4.26. I have hdlc compiled as a module. Should hdlc be compiled into the kernel? Does anyone see a problem here? Thanks, -- Michael Welter Introspect Telephony Corp. Denver,

I am running RedHat Fedora Core 3 with their "kernel-2.6.10-1.741_FC3" kernel, and if I use nethdlc in zaptel.conf, when I run ztcfg I get the message: ZT_CHANCONFIG failed on channel 11: Function not implemented (38) Does anyone have ideas on how I can work around this issue? T1 channels 1-10 are voice, 11-24 are data (second board isn't used at the moment). Here is my

Hello, I'm thinking of ordering an OpenVox A400P01 (A400P + 1 PORT FXO Bundle) for use in a old IBM 8364 thin client: http://www.openvox.com.cn/products_detail.php?genre_id=9&id=28 http://silicon-verl.de/home/flo/software/netstation-8364/ Has someone already used this hardware with Asterisk, especially on a small piece of hardware like this, and could offer some feedback? Thank you.

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

Hi I am looking for a source for an OpenVox card. Has anyone purchased through http://www.voiplink.com or do you normally use another vendor or OpenVox.cn directly? thanks Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090705/6d90b996/attachment.htm

Hello Has someone used the OpenVox A400P01 (ie. a supposedly Digium-compatible A400P board with a single FXO module www.openvox.com.cn/products_detail.php?genre_id=9&id=28) successfully? I've put it in an older PC with a Gigabyte GA-7ZX motherboard, then a more recent PC with an Asrock K8NF4G-SATA2: dmesg returns nothing :-/ Is there something specific that needs to be done in either

Hi, This is tech-support from OpenVox, would you mind to send email to tim.june at openvox.cn for more details about G400P issue? Or contact me via IM below for better communication. Regards, MSN: tim.june at msn.cn Gtalk: tim.june666 at gmail.com Skype: tim.jjune OpenVox Communication Co. Ltd. Quick Support: http://wiki.openvox.cn/index.php/OpenVox_Quick_Support

hello, I have the A400P01 from OpenVox. Is necesary to install all this packages? http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.17.tar.gz http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.16.tar.gz http://ftp.digium.com/pub/libpri/releases/libpri-1.2.4.tar.gz or just with asterisk and zaptel is enough. thanks a lot -------------- next part -------------- An HTML attachment was

Hello all- My client has purchased these two OpenVox cards and I'm configuring a system with Asterisk 1.6. In the past I have used bristuff and libpri with older versions of Asterisk, but now I would like to upgrade to Asterisk 1.6. Question, should I be using mISDN or libpri for these cards when they are in the same system, or does DAHDI now support both cards under asterisk 1.6

Hello If someone had the opportunity of trying those two analog cards, how do they compare? Digium's sells for $150 while OpenVox's sells for $95. Thanks.

I installed a new machine with CentOS 5.2, Zaptel 1.4.11 and Asterisk 1.4.21.2 and an OpenVox A1200P card. This card has its own driver and Zaptel has been patched to use it. The problem is that from the moment I load Zaptel I get this messages on the console: buffer re-sync occur from 2 to 1 buffer re-sync occur from 1 to 0 buffer re-sync occur from 0 to 1 buffer re-sync occur from 1 to 0