similar to: Asterisk on IBM Netvista 2800 8364-EXX?

Hello, I'm thinking of ordering an OpenVox A400P01 (A400P + 1 PORT FXO Bundle) for use in a old IBM 8364 thin client: http://www.openvox.com.cn/products_detail.php?genre_id=9&id=28 http://silicon-verl.de/home/flo/software/netstation-8364/ Has someone already used this hardware with Asterisk, especially on a small piece of hardware like this, and could offer some feedback? Thank you.

Hello Since I got the IBM Netvista to boot Linux, and am still waiting for the Compact Flash cards that I ordered, I was wondering if someone knew of an Asterisk distribution that can run on that kind of diskless host? I've taken a look at AstLinux and AskoziaPBX, but they both seem to be meant to be installed on a solid-state medium instead of RAM. For instance, the Netvista is unable to

Hi All, A couple of weeks ago I noticed Askozia PBX, which is a new embedded Asterisk & OS distro at http://askozia.com/pbx. This caught my attention for two reasons; it uses v1.4 of Asterisk, and it uses the m0n0wall development framework to build on FreeBSD with a PHP based GUI. I've used m0n0wall for years, and FreeNAS also, which shares the same OS/GUI framework. I booted the latest

Hello, Having not been able to run a kernel without locking up since 2.6.9-34.0.2.EL, I think I have found the 'fix'. There are numerous post about this and all suggest its related to ACPI. For me, its APIC. I added the following to grub.conf: noapic apic=off. Been up now 4 days, 22 mins. running 2.6.9-78.0.8.EL. Previously I could get maybe 4 - 6 hours before locking up. Another

Hello, I am having problems with video in X. I get an over frequency issue using the stock CentOS 4.2 driver. I have searched IBM and Intel for the driver but no luck. Occassionally I see something about need to load a kernel module for agpgart. How do I do this? Anyone have a similar setup or know where I can find the driver? TIA

I've got an odd situation that I need some advise on. I have two computers that I am planning to use as a cluster. I initially started with some left over Compaq Presairos with 667MHz CPUs. I loaded CentOS 4.3 and later updated to 4.4. Things ran normally, albeit slowly. I had an opportunity to upgrade to a pair of IBM Netvistas with 2.26 GHz CPUs, I did this by transferring the

Hello, I'm looking for a dirt cheap solution for SOHO use to handle at most a couple of POTS lines, and I notice that X10?P cards go for $15 on eBay as opposed to $90 for an OpenVox card or over $200 for a Sangoma. I have a couple of questions about those cheap FXO cards: 1. Are they all glorified softmodems, ie. none has an on-board CPU or DSP and outsources all processing to the

I'm looking for a web GUI to Asterisk that I can run on some small embedded hardware. I've used FreePBX in the past but the overhead is not to my liking and it is entirely too complicated. I do not wish to change my entire OS just for the GUI either (aka AstLinux). Is there anything out there? I'd like to have only a small set of features, primarily the configuration of extensions,

Hello, I'm new to asterisk and this list. The ISO download appears to have 1.6 with the FreePBX GUI but I am looking to use the Asterisk GUI. The only option for the Asterisk GUI is to use 1.4. Is it as simple as installing 1.6 only then using the yum repository to install the Asterisk GUI? If so, what packages are needed? Thanks!

Hello For those SOHO customers (ie. at most, a couple of POTS/ISDN connections and simultaneous SIP calls) who'd rather not use a big, noisy PC to run Asterisk, I'd like to offer an alternative that has the following features: - not old hardware sold on eBay, ie. it must be up-to-date hardware sold by a company currently in business - compact, silent - has room for a 2.5" hard-disk,

Hi all, As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the ISDN phone does not work. There is the setting and error. ***********************Enviroment********************************** Asterisk-1.6.1.18 dahdi-linux-2.3.0.1 dahdi-tool-2.30. libpri-1.4.11.2 CentOS-5.5 OpenVox B400P ******************************************************************** In my case , I set prot 1

Hi, Alistair Cunningham of Integrics was our guest yesterday. We talked about Integrics new product Geons, a suite of software for building large-scale distributed enterprise applications. The recorded session is now available here: http://www.voipusersconference.org/2010/geons/ The extremely rare John Todd was sighted (and heard) at this event. If you are developing a product or service

hello, I have the A400P01 from OpenVox. Is necesary to install all this packages? http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.17.tar.gz http://ftp.digium.com/pub/zaptel/releases/zaptel-1.2.16.tar.gz http://ftp.digium.com/pub/libpri/releases/libpri-1.2.4.tar.gz or just with asterisk and zaptel is enough. thanks a lot -------------- next part -------------- An HTML attachment was

Hello Has someone used the OpenVox A400P01 (ie. a supposedly Digium-compatible A400P board with a single FXO module www.openvox.com.cn/products_detail.php?genre_id=9&id=28) successfully? I've put it in an older PC with a Gigabyte GA-7ZX motherboard, then a more recent PC with an Asrock K8NF4G-SATA2: dmesg returns nothing :-/ Is there something specific that needs to be done in either

Hello friends, in aCentOS with a A400P01 OpenVox PCI I have a analog line connected. I am new in Linux and Asterisk, my steps are theese: 1. Install CentOS 4.4 (basic instalation). 2. Command line: yum -y update yum install gcc kernel-devel bison openssl-devel yum install openssl-devel 3. Download the source: wget http://ftp.digium.com/pub/asterisk/releases/asterisk-1.2.17.tar.gz

Hello everyone, I'm having some troubles with some dialplan logic I've written which sends missed call notifications via e-mail. It's currently sending these notifications even if the call was answered, marking them all as hung-up. What I've been able to see is that the macro never reaches the "s-ANSWER" bits which mark the call as successful. I've posted my

Hi Everyone, Knowing that running Asterisk on an embedded board like the Alix2d3 requires some fine tuning. Do you know of any good guides out there that does this from beginning to end? Looking to run this in a small office environment. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello If someone had the opportunity of trying those two analog cards, how do they compare? Digium's sells for $150 while OpenVox's sells for $95. Thanks.

Hello folks, I'm running 1.8.11 on a Centos 6 system with an adjacent Hylafax server using softmodems: Noticed this in the Asterisk log when trying to send a fax from Hylafax to Asterisk: [Apr 3 01:53:09] WARNING[29184]: chan_sip.c:8926 process_sdp: Multiple audio streams are not supported I've googled a few asterisk tickets that may suggest that yes, multiple audio streams are not

How small can an Asterisk system be, in terms of disk space utilized? I am looking for just asterisk, with mysql, postgresql, or sqlite, with PHP and Python. After finishing the build and removing the tools, how small can the whole system be? 100Mb, 200Mb? Can packages be used to build the whole system, like using debs and rpms alone? /vfclists