similar to: asterisk performance

Hi, We had modified some configuration in our cisco 800 series router. We set all the UDP packets from our servers to ip precedence 5 and also allocate 75% of bandwidth for UDP packets. However we still facing latency and low volume problem. Is it our 512k outbound bandwidth not enough to handle it? Thanks Regards, jorain ----- Original Message ----- From: jorain To: asterisk-users

Hi all, I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo). channel 1 -> fxs -> telephone channel 2 -> fxs -> telephone channel 3 -> fxo -> extension 15 at panasonic pbx channel 4 -> fxo -> phone line from telco We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After

For anyone looking for a cheap home ZFS server... Dell is having a sale on their PowerEdge SC440 for $199 (regular $598) through 11/12/2008. http://www.dell.com/content/products/productdetails.aspx/pedge_sc440?c=us&cs=04&l=en&s=bsd Its got Dual Core Intel? Pentium?E2180, 2.0GHz, 1MB Cache, 800MHz FSB and you can upgrade the memory (ECC too) to 2gb for 19$ bucks. @$199, I just

Does anyone on list have experience with Digium hardware in the following servers: Dell poweredge SC440 IBM xSeries x226 Have just had major hassles getting TE205P ISDN cards going in these boxes. No joy so far. Anyone managed to do it yet? Thanks. Mark

What cpu/memmory configurations have people had good luck with for a small office asterisk server... (polycom's/poe linksys) Dell's got their $200 SC440 going again until the 12th... and I'm thinking it might be just the ticket...

Hi all. I have a Dell SC440 running Centos 4.4. It has two 500GB disks in a RAID1 array using linux software raid (md1 is / and md0 is /boot). Recently the root file system was remounted read-only for some reason. The logs don't show anything unusual, presumably the file system was read-only before anythng was logged. Running dmesg showed this error repeated many times: EXT3-fs error (device

Hi, I have successfully configured DIGIUM card and successfully communicated through it to the another E1 card running application. Can anybody tell me does TE120P support MFC/R2 protocol. Thanks and Regards sanchal singh

I have a Dell SC440 with Centos and Asterisk 1.4.21 and a card openvox D110PG, T1, when a person calling from the PTSN will listen to them but then begins to distort the voice I heard that name. I probe the card in another computer and it works perfectly. Anyone has any idea or help. I'm going crazy with this problem. Install Debian on this server and the same thing happened to me. I bought

Hi all, Can anybody tell me that wether I should install DIGIUM-TE120P card on redhat9.0 2.4.20-8 or 2.6.18 kernel. I am using kernel 2.6.18 but facing a very serious problem of modutils and iptable. Can anybody help me out. Thanx and Regards sanchal singh

On Thu, 2015-08-13 at 23:51 -0700, Gordon Messmer wrote: > On 08/13/2015 02:44 PM, Bill Maltby (C4B) wrote: > > Top shows > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > > 32160 root 20 0 259m 104m 22m R 76.5 1.3 559:07.79 Xorg > > 23391 hardtolo 20 0 6293m 215m 26m S 16.9 2.7 21:49.86 java > > Well, what's process

Hi, I am facing problem in configuring D-channel for TE120P card.I did the following things /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 /etc/asterisk/zaptel.conf group=1 signalling=pri_cpe

About a month ago, David made a commit to wobbly to the spring engine which has introduced some bugs. They are hard to explain so bear with me. In a sense, the wobbly plugin does not seem as smooth as it used to be and the windows jerk all over the place. For example, I sometimes notice that when I move a large window (around 2/3 of the size of the desktop window), If I moved it down, the top of

Hi I have set up the following example to illustrates the problem I am having with scriptaculous. http://www.webmaint.com/scriptaculous_demo.html You will notice the animation is very jerky and looks awful in Firefox, and it just about passable in Internet Explorer I presume this is because of the way the browser renders the data in the select boxes. Is there any work around that could create a

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

Dear ALl Can we use Asterisk for only for transcoding?. if yes how many concurent call we can transcode with help of Astetrisk? For this we only need to config SIP.conf or any other file too. Thanks Amit-- -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100704/f6159f70/attachment.htm

I just updated to RELENG_7 from 6.2 and I'm running into some really annoying issues with jerky mouse movement and skipping sound. This seems to be similar to: Re: SCHED_4BSD in RELENG_7 disturbs workflow This happens both with 4BSD and ULE. I seems to happen when I'm compiling ports and a new cc/bzip2/sh process fires off (I'm just watching top), I'll get the skip/freezeup.

Hi All, I'm having problems trying to get a TE120P operational in Canada. I keep getting a congestion error when I try to make a call. I'm not sure if my switching, parity, etc is correct. I'm hoping that someone will be able to verify my config. The Telco is SaskTel, with a 10 channel 50 DDI service. Zap show channels show and ztcfg -vv looks ok and the zttool show

Hello List, I just have a query.... is it possible to have 2 or more telephone number mapped to the same E1 line and if so will the TE120P card pick up the last 4 digits of each number - as it is currently doing for the one? -- Kind Regards Etienne Pretorius -------------- next part -------------- An HTML attachment was scrubbed... URL:

Alrighty. I'm having a hell of a time and I need help. I'll try to give as much information as possible. ---------- HARDWARE ---------- MB: Supermicro PDSBM-LN2+ Intel 946GZ ICH7R + Intel? 82573 Memory: Crucial 512Mb, 1Gb, 2Gb modules matched to above MB. Processors: Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit Intel Pentium E2140

Here is the scenario: Asterisk 1.14.13; zaptel 1.4.6; Digium TE120P (same problem with various previous versions; same problem with different TE120P cards). The customer has a partial (10 B-Channel) PRI that when it is busy (eight or more B channels in use), tends to fail as shown below... [Jan 26 23:00:31] ERROR[31893] chan_zap.c: Write to 28 failed: Unknown error 500 [Jan 26 23:00:31]