similar to: 7960 Won't Register Yet Multiple Attempts?

Hello all I've discovered that SIP channels sometimes get stuck in *. I've read some posts from Fri 29 Aug 2003 which mentions this issue, but there doesn't seem to be any final answers I don't know if this is related to the 0001604 bug? Below is a list from one of the incidents: I know the (d) means that it is scheduled for destruction but the 10.1.1.45 channel hasn't

Hi All I am using asterisk 1.2.4 Please see the results when I execute Sip show channels X X X X x 192.168.8.106(None) 04cddc1f5a0 00101/00000 unkn No 215.96.142.83 (None) caac0846-cf 00101/00000 unkn No 192.168.8.106(None) 94910146-46 00101/00000 unkn No 192.168.8.106(None) 793ed1eb0f2 00101/00000 unkn No 85.219.172.253 (None)

Can someone recommend the best way to view current calls in progress on the Asterisk console? Neither the 'show channels' or 'sip show channels' commands are easy to read. hestia*CLI> show channels Channel Location State Application(Data) SIP/2944093-f9e2 (None) Up Bridged Call(SIP/2944079-e7f2) SIP/2944079-e7f2

I am using a2billing as calling card platform with asterisk 1.2.17. After running for several days, if I issue 'sip show channels' command, I got a lot of dead sip channels although 'show channels' command only show 5 channels. What cause these dead channels? How can I clean out these dead channels? Will they pose any problem to my * server if left alone? What does this (d) mean?

I'm having an oddball issue with a Polycom SoundPoint IP 500. As you can see below Asterisk thinks there are 2 SIP channels active, but show channels tells me there are no calls active. Anyone have any idea why this is happening? The Polycom occasionally stops accepting calls and requires a power cycle. fs-1*CLI> sip show channels Peer User/ANR Call ID Seq

Has anyone seen this before? This channel is consistently present on both of my asterisk servers. Sometimes they disappear for a few seconds and then come back. It always has the same Call ID. voip1*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.168.0.102 (None) df92fb1b-8a 00101/03059 00000ms 0000ms UNKN

I have a high volume asterisk 1.40 installation and I ran a SIP SHOW CHANNELS. (see partial output below). My questions are: 1. "wc-l" of the output shows 4000 lines. Does this mean 2000 active calls? (2 channels per call) 2. The latter part of the output shows "unkn" for Form column. Why does it not know the codec? Could it be UDPTL? Or are these calls messed up? 3.

Behavior on Asterisk 1.2.12, 1.2.15, 1.2.16 "sip show channels" Always tends to show 100+ lines such as 192.168.1.241 (None) 2e2872da-1d 00101/21507 unkn No Rx: REGISTER Never seem to go away 198 total peers on this server All devices are behind NAT Registration expirations between 30secs to 2 minutes to help keep NAT open Should I extend the

My sip show channels shows some channels active that I can not make sense out of, and they have been that way for days, so I am pretty sure they are orphans. Is there a way to show active CALLS (instead of channels) to try and determine the source? Does the output below provide any clues as to why these channels might show active? Anyone aware of related bugs? The #'s indicate original

Hi all, Some of my asterisk users have used their maximum call limit for incoming calls (peers). There incoming call limit should automatically reset to zero after hangup but its not happening and they no longer can recieve any calls as their allowed limit is already full. So is there any way to reset the call limit on peers by commands or do i have to restart my asterisk server? -- Best Regards

Hi, I have about 10 Cisco 7960s behind a PIX 506E (IOS v6.3) firewall. After some period of time, asterisk says that some of them are unreachable, and the phones lose their registration. The only way to make the phones recover is to clear the NAT translation tables for the phones on the PIX (clear xlate...) Does anyone know how to fix this? As you can imagine, it is quite annoying. And it does not

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

I'm having a horrible experience getting a Cisco ATA-186 to work with *. I can make calls from the ATA with no problems. However, incoming calls make the ATA ring once, and then the call is disconnected. I have no problems with my Sipura 2000 or my Grandstream phones. I am running 2.16.1 sip code on the ATA 186. Neither * nor the ATA is behind a NAT. They are both on public IP addresses

Having just run the command "sip show channels" I get a list of channels even though there is no one on the phone (we only have 4 so it's easy to tell). Here is what I get: Peer User/ANR Call ID Seq (Tx/Rx) Format 192.168.0.22 (None) 4c81ac8e90c 00101/00000 UNKN 192.168.0.22 (None) 984ee48048d 00101/00000 UNKN 192.168.0.22

I have spent the morning on this project, still without success. Summary: Yesterday I inadvertently unplugged my Grandstream phone. I might add I did a rebuild of my s/w from CVS at the same time. Since then, the Budgetone seems to talk SIP just fine, but the RTP being sent to it by asterisk "doesn't make any sound." It was suggested I do a factory reset of the phone, which I

SIP channel hang ups are progressively getting worse and I'm really grasping at straws here trying to find out what the cause is. The problem start, once a week or so the SIP phones couldn't communicate with the server, though there was no error message on the server and everything appeared fine on the server. It's now doing it multiple times a day and I fear having to go back to our

We are using the following to record conversations. exten => _1XXX.,1,SetVar(CALLFILENAME=call_to_${EXTEN:1}_dated_${TIMESTAMP}) exten => _1XXX.,2,Monitor(wav,${CALLFILENAME},m) exten => _1XXX.,3,Dial(IAX2/4506:zj5S3A5a@nl.voipgate.nl/${EXTEN:1}) exten => _1XXX.,4,Congestion exten => _1XXX.,104,Congestion This was working previously to record both sides of the conversation but now

I need to set up an office full of Cisco 7960 phones behind NAT with the server out in Colo. The first test phone registers fine, but the second one does not register. The first phone's registration looks like so: /SIP/Registry/3115552368 :64.169.xx.yyy:38836:3600:3115552368:sip:3115552368@64.169.xx.yyy:5060 When the second phone tries to register, it gets back a 404 not found. Not a

Hey Guys, I'm curious if there's an interest in a free, CallerID database? For those of you in the same spot we are, our current provider only provides us with the CND, excluding CNAM. Would creating a public database, managed by users be worthwhile to anyone? Thanks - Any input is greatly appreciated. -- Robert Norton SophMedia LLC Operations Manager Cell: 480-234-4312 Office:

Hi all: I recently update a system from CVS (Asterisk CVS-09/25/03-15:58:42), and I receiving the following message: *CLI> WARNING[1187305408]: File chan_sip.c, Line 1864 (process_sdp): No compatible codecs! The "show codecs" command shows: *CLI> show codecs 1 (1 << 0) G.723.1 2 (1 << 1) GSM 4 (1 << 2) G.711 u-law 8 (1 << 3) G.711 A-law 16 (1 <<