similar to: Play Beep instead of MOH

Hello List, Does anyone have access to the soft key configuration files for the Cisco 7911/7941/7970/7971 phones? Checked up on the Cisco site and didn't find much up there. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part

Just wondering if this is possible: Make a call from a registered sip extension (Doesn't matter if it's internal or external) during the call press a key sequence let say *90 to start recording call. When the call ends the recording automagically goes to their voicemail. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee,

I've been reading up on followme app for asterisk 1.4 and I have it working but I was wondering if the following was possible: Based on followme.conf present the caller with the option to locate the person: Call comes in (external or internal) and rings extension with followme configured. Before the followme app is initiated the caller is prompted to locate the person (by pressing 1 which

Hello List, I'm looking at the page command. I was wondering if there was a way to set a wild card to dial all registered sip devices. For example page all 1XXX extensions. Thanks in advance Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next

Just wondering what web GUI people like for asterisk. I installed asterisk from source and I was looking at possibly installing web GUI for system management. So far freepbx.org looks promising anybody else have any suggestions. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy

I'm not sure if anyone has done this before or not but, I was able get the Cisco IP Communicator soft phone to work with Asterisk using SIP. Thought I would share my experiences. The key is on the installation. To have the software use the SIP protocol type the following command: "msiexec /i CiscoIPCommunicatorSetup.msi /qb SIP=1". After installation configuration is just like

Hello list, Can someone outline the steps for selecting OSLEC canceller in 1.4.6? I know there was a bug fix for this but I can't figure out how to select it. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML

Hello List, For those of you using Cisco phones, did you have to purchase a 'SIP license' for each phone? Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone use the LDAP feature yet on the polycom phones? If so how well does it work? How are you using it in your environment? http://polycom.com/usa/en/products/voice/desktop/soundpoint_ip/applicati ons/corporate_directory_access.html Roy Anciso Director of Technology Manistee Intermediate School District 772 East Parkdale Avenue Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-398-3036 roy at

Hello List, After seeing a few positive responses for the Linksys SPA-942 phones I was hoping to get some answers on the following questions: * How do the phones handling system wide paging? Is it similar to the Polycom phones? * Can a corporate directory be configured with the phones using Asterisk? * How is the speaker phone quality? Thanks Roy Anciso Director of Technology Manistee

For those of you running Cisco phones, did you start out with a Cisco CallManager and move to Asterisk? And if you did switch do you find that you or your users are missing features they once had? How have you handle the issue? Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at

Hello List, Not sure if this will be helpful but I made changes to the original Cisco directory.php.txt script and applied them for use on the Polycom phones. This will create an extension directory and alphabetize it based on the sip registrations you have setup in sip.conf. Note that this only seeds the phones and does not synchronize them. Anyway thought it might save people some time. To

Hello List, We purchased a TE120P card from Digium and it works great. The only problem is that we are still experiencing echo on some calls. I've tried various echo cancellers (right now we are using OSLEC) and still no luck. My question has anyone gone from the TE120P to a Sangoma A101D-X Single Port T1/E1/J1 w/ echo cancellation? Have you noticed a difference? Also I called

I'm trying to understand something that just doesn't seem to compute. How can companies like Cisco justify selling their hard phones for as much as they do? I know there is a matter of recouping R&D costs but when you look at the iPhone with all its amazing features for less than $500.00 it just doesn't make sense. Am I the only one that thinks this? Roy Anciso Director of

phones or extensions in the system. On 3/12/08, Anciso, Roy <roy at manistee.org> wrote: > Is there a limit on how many phones you can use? I couldn't find > anything on the website about this. > > > > ________________________________ > > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joshua

I have a normal setup of calls coming in on analog lines (4 of them) coming into an old KX1232 pbx. I have those lines forwarded to a T1 card in the KX1232 going over to my T1 card, it then uses IAX going over to my REAL asterisk pbx. (these steps are there for testing and other items) Anyway after a 10 minute call asterisk gives a faint beep, beep, beep and then hangs up the line. Is there

Does anyone have a more clear beep tone for the voicemail? The default one seems to cut off and give the feeling that there is a problem with the vm :) If no one has this available, I may try to create a new one. Thanks. -- respectfully, Joseph - ------=============

We've had a few people complain that the "beep" before leaving a voicemail is not loud enough and too short. Does anybody have a recorded beep that they can share, that is a little louder and a little longer? We've had this box in production for 2+ years, so I hate to mess with the gain on the PRI or anything like that because everything else works fine. I know nothing

Hello There, I would like to play a busy tone (ie BEEP BEEP BEEP) when the underline carrier sends back 486 Busy Here. Looking at Dial parameters ( http://www.voip-info.org/wiki/view/Asterisk+cmd+Dial), it mentioned something about the r parameter as not being very professional or something like that... Then there was: U(x): Executes, via gosub, routine x on the called channel. This is similar

Hello list Is there any way how I could make syslinux beep when it starts. This could be very usefull feature in the CD (based on knoppix www.knoppix.org ) that I have made for blind people. Cheers MIkko --