similar to: Sip 1.4.x DTMF detection not working

Hello All, I have Asterisk 1.4.5 running on a SuSE 10.3 x86_64 2.6.18.2-34 I upgraded from 1.4.2 to 1.4.5 on sunday the 24 of june and since have been getting: Internal RTCP NTP clock skew detected: lsr=1402479300, now=1402675136, dlsr=196500 (2:998ms), diff=664 I see an entry in Mantis that Russell fixed code so that this will not show when it shouldn't. Would i be correct in

Hello All, I am looking at doing some video conferencing with SIP. I was hoping to get some early pointers from any one that is currently doing this. I have been all over goggle and voip-info and there is a ton of anecdotal information but, I was hoping for more specifics of what people are actually using that works and even some of what hasn't worked so that I can stay away. What I am

Hello All, I have a requirement to setup a predictive dialer for a customers call center. I am asking for pros and cons of the different dialers available for Asterisk. If you are going to send marketing material send it to my e-mail directly please and not to the list. I was hoping to get the opinions of any one using any of these dialers and what they liked and didn't like, ease of

I am looking for pros and cons on the Intel Atom cpu. Has anybody been using these in production? I am looking at an Atom D510 (dual core 1.6GHz, 1M cache) to run maybe 25 to 30 extensions, 4 or 5 calls at once(maybe as high as 7 simultaneous calls), g729 all the way through except voicemail will be wav format for email purposes(requirement). I will be tying 3 of these together to route

Hello all, Was hoping to get a sanity check along with a question. Below is the output from top run with normal defaults, except to show both CPU's, on a SuSE 10.2 box with Asterisk v1.4.15. top - 10:00:58 up 3 days, 5:54, 4 users, load average: 0.15, 0.05, 0.01 Tasks: 110 total, 2 running, 108 sleeping, 0 stopped, 0 zombie Cpu0 : 0.2%us, 0.2%sy, 0.0%ni, 97.3%id, 2.2%wa, 0.1%hi, 0.0%si,

I'm replacing a SoundPoint IP 600 with a SoundPoint IP 650. I attempted to simply reuse the existing config files for the old phone on the new phone, but the new phone would lock up on the 4th digit when attempted to dial out certain numbers. So, I downloaded the newest firmware and config templates from Polycom, and attempted to migrate the settings. Seems I'm missing something from

I am having some difficulty getting a T100P card to work with my PRI. When I attempt to make an outbound call via: exten => 1004,1,Dial(Zap/g1/NPANXXXXXX) I see the following on the asterisk console: -- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create channel of type

Hello all, OS OpenSuSE 10.3 * ver 1.4.26.2 zaptel ver. 1.12 Digium TE122 I have a request for remote users to be able to dial through the system so that the sales managers can barge/chanspy on the sales force. I have the DISA part working with authentication(rather straight forward) but what I can not figure out is how to enable the supervisors to be able to barge on these calls. Is there a

We fairly recently switched service providers for our 4 PRI circuits. Since that time, we started to notice some failed inbound calls. These calls terminate with an ISDN cause code 47 'resource unavailble'. Most of the time I see this error on the first or second channel on the second span in a trunk group (This is the providers trunk group for hunting, not an Asterisk trunk group). All

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

Hi ! We curently have a centos 5 / asterisk 1.4 server that we have some DTMF problems with. It has a Sangoma A104d card and only port one is used to connect to the PSTN. Port 2 is conencted via a cross-over cable to a RAS for modem access and port 3 is connected for data communication via PPP. Now, I want to freshen this setup to something newer. So I installed a Scientific Linux 6 server,

Hello, I am using a perl script to pull call info from a DB and place calls via telnet and AMI, all on local machine of course. My problem is that I need to capture any response from the carier, such as this taht appears in the CLI: [Mar 1 12:55:50] == Using SIP RTP CoS mark 5 [Mar 1 12:55:50] -- Got SIP response 503 "No Circuit Available" back from xxx.xxx.xxx.xxx:5060 [Mar

Hello, I have a situation where a remote worker dials in to the asterisk server, enters the "secret code", then dials out via Disa on a PRI. This was all working great until this morning. Now the calls is placed out, connected but there is no voice from/to either phone. This is what shows on the CLI when the calls is bridged at a verbose of 4 and a debug of 1: [Jan 25 17:51:40] --

I am failing to get compactPDF to make any change to a pdf file that, a/c to the message from the CRAN upload site, can be very substantially compacted. Any ideas what may be wrong? I have also tried recreating the pdf file. I also tried R CMD build --resave-data --compact-vignettes DAAG The data files compact alright (but I get the 'significantly better compression' warning message

Hello All, I have a setup of ABE on rPath linux,Sangoma A101D, and a T-1 line (Not PRI) which is all happily coexisting and all lights are green. The T-1 comes in from the world into a "Shark Box" which splits the T into 384K data and 6 channels voice. The data side is working great. The voice side, not so great. It was originally broken out to 6 pots line and Verizon came back

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get:

I find that if start R-2.6.0 in a workspace with no .RData file, load one of my workspaces from R-2.5.1 or earlier into R-2.6.0, and then before doing anything else type postscript(file="z.ps"), I get:: > ls() character(0) > load(url("http://www.maths.anu.edu.au/~johnm/r/test5.RData")) > postscript(file="z.ps") Error in postscript(file = "z.ps")

I've now processed this document through Acrobat software. The navigation keys in Acrobat Reader should now handle it properly. The other advantage is a dramatic reduction in size, to half a megabyte. The new file is http://wwwmaths.anu.edu.au/~johnm/r/r4dat-gr.pdf Data sets [use source() to access them from an R session] are in the same directory, i. e.

Hi- I recently updated my Wine from 9.something to the latest version. Before I updated, I could run Windows apps from a terminal command line by just entering the app name, but now I get (for example): Code: /home/johnm/bin/LINT-NT.EXE: /home/johnm/bin/LINT-NT.EXE: cannot execute binary file which I guess means it is just trying to execute the app as a 'normal' Linux app. What is it

Hi all, I''m not sure if this is a cucumber or webrat thing given that I only starting tinkering with both last night for the first time (testing newb as well), but I''ve come across an oddity when trying to write a scenario to create a user. Scenario: Register new user Given I am on the new user page And I fill in "login" with "fredf"