similar to: Cross-compiling asterisk-1.4 for Debian on a slug

I am not sure where I should even begin troubleshooting this. I know a little bit about Linux and am comfortable editing files and running commands however definitely not a Linux guru. I have ipkg already installed on the QNAP. I know absolutely nothing about ruby on rails. Thanks for any help. For those that are not familiar with a QNAP, ipkg is the same as apt-get or yum in some Linux

Hi, I try to port samba4beta8 to Optware which includes cross compiling it for various platforms. I already created makefiles for optware for samba versions 3.4 and 3.6. Creating a working makefile for samba4 I try to use the new build environment but it puzzles me. I don't get over part where the python version is being checked. From my findings it looks like the linker dislikes the

Hi. I've made a new attempt at build Dovecot. The build and then install processes appeared to work find. Then when I try to run Dovecot it reports the error: /share/MD0_DATA/optware/opt/sbin/dovecot: error while loading shared libraries: libdovecot.so.0: cannot open shared object file: No such file or directory To get a better idea of what's going on, I added

When building Pigeonhole 2.2 for ARM, the following warnings are produced: uri-mailto.c: In function '_parse_hex_value': uri-mailto.c:139: warning: comparison is always false due to limited range of data type uri-mailto.c:145: warning: comparison is always false due to limited range of data type The problem is a test assuming that char is a signed type : static inline int

Hi guys! I just try to compile Asterisk with "make all" and get the following lines multible times: cli.c:31:19: build.h: No such file or directory dlfcn.c:40:25: mach-o/dyld.h: No such file or directory dlfcn.c:41:26: mach-o/nlist.h: No such file or directory dlfcn.c:42:28: mach-o/getsect.h: No such file or directory Can someone tell me what's exactly missing?

Hi, when I try to compile dovecot-1.2-sieve-0.1.3 on my NAS I get the error below and I have no idea why and who to fix this. I have a Qnap TS239pro NAS with a Intel Atom CPU running Linux. I installed and configured the ipkg dovecot packet (1.2.beta1). Getting mails via fetchmail and send them with deliver to the IMAP. Not I want to include sieve to filter mails as this is not part of the

Full_Name: Alex Buerkle Version: 1.7.0 OS: OS X Submission from: (NULL) (137.28.112.199) The configure of R-1.7.0 completed, but the build fails with error below. This failure appears to be because dlfcn.h was missing (installing it fixed the problem). The possible bug: my limited ability to read ./configure suggests that it tests for dlfcn.h, but does not fail if it doesn't find it on

Hi, I have the followed Rails 3 routes: Hello::Application.routes.draw do resources :blogs do resources :articles do resources :comments end end end By raking them, we can find (for instance): GET /blogs/:blog_id/articles(.:format) {:action=>"index", :controller=>"articles"} Because every routes begin with the

after booting a CentOS 4.2 system I have a bunch of zombies... root 2828 0.0 0.0 0 0 ? Z 14:41 0:00 [chvt] <defunct> My read from googling this is chvt stems from something that involves a shell. They ***may*** have been created from my attempts to start mysqld which isn't working (I will start another thread) but no efforts to kill them off are working...

configure: WARNING: dlfcn.h: present but cannot be compiled configure: WARNING: dlfcn.h: check for missing prerequisite headers? configure: WARNING: dlfcn.h: see the Autoconf documentation configure: WARNING: dlfcn.h: section "Present But Cannot Be Compiled" configure: WARNING: dlfcn.h: proceeding with the preprocessor's result configure: WARNING: dlfcn.h: in the future, the

Sorry to interrupt but for such devices you should use Optware. - It is created for this kind of hardware. http://www.nslu2-linux.org/wiki/Optware/HomePage Here is the Bootstrap for ARM http://ipkg.nslu2-linux.org/feeds/optware/syno-x07/cross/unstable/syno-x07-bootstrap_1.2-7_arm.xsh and in this repository you find a Ices Package: ices0 Version: 0.4-2 Depends: libshout, libxml2, perl Status:

** hello folks, all started with searching for an MS exchange server connector to fetch my office my by Thunderbord on my private machine. So far I used Davmaill (OWA) but I'm not that satisfied, so I found OpenChange but that needs Samba4 installed on my NAS. So I was checking the Samba wiki and mailing archive but I'm bit confused. There are several version available, plus franky, what

Through the optware-package I have installed Asterisk on an external USB. Further I have a Linksys WRT610N with DD-WRT v24 mega. I start asterisk with the following command : /opt/sbin/asterisk -c I get the following WARNING : root at DD-WRT:/opt/etc/asterisk# /opt/sbin/asterisk -c Asterisk 1.4.22.1, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster at

Can you describe your architecture? -- Christian Eichert _____________________________________________ Von: TheDarkener <thedarkener at logicalnetworking.net> Gesendet: Wed Jan 11 00:02:01 MEZ 2012 An: icecast at xiph.org Betreff: Re: [Icecast] ices2 memory leak on Debian/ARM (The Darkener) Hi Keith, As I explained before, Valgrind won't run in my arch. I'll Google for some

Has anyone else got 1.2 compiled from cvs ? I've posted the question below to the -dev list but got no answers: 1) No-one else is trying beta 1 2) No-one else is having any issues (I must be the idiot) 3) No-one else saw my message :) I have been trying to compile 1.2 beta 1 on a centos 4 box, to no avail. The "make" command seems to compile ok, but "make install"

Ok, I managed to compile the Ogg and Vorbis libs. Then, after modifying the file audio_out.c as follows: original: #include <dlfcn.h> modified: #include <win32/include/dlfcn.h> I was able to (finally!) compile libao. Then I tried to compile the module vorbis-tools, but uninvited problems came to my party. [...] > /usr/bin/ld: multiple definitions of symbol _getopt >

Hi, I just tried to build the latest portable code from CVS on Cygwin. I stumbled over a problem with the definitions of gai_strerror and ssh_gai_strerror. On systems not having gai_strerror, the fake-rfc2553.c file defines its own version of gai_strerror, and fake-rfc2553.h additionally has this definition of gai_strerror: #define gai_strerror(a) (ssh_gai_strerror(a)) OTOH, misc.c

Hello all, I'm trying to build speex library for a CRIS processor running Linux. The configure seems to fail. Here is the command I use wich works to build libogg : ./configure --host=cris --prefix=/home/axis/devboard_lx/target/cris-axis-linux-gnu/usr/local --exec-prefix=/home/axis/devboard_lx/target/cris-axis-linux-gnu/usr/local (I have all my target files in this directory :

Sorry for the double post, I've been doing some more looking into this, and it seems like this is a separate problem of more general interest than my original AD issue. My understanding is that the repository does not maintain a configure script in the source directory. Packaged releases of the samba code include one, but if you're trying to build from the repo, you need to do it

I have unzipped the R-2.5.0.tar.gz gzip -dc R-x.y.z.tar.gz | tar xvf - 2. then #./configure 3. ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu loading site script './config.site' loading build specific script './config.site' checking for pwd... /bin/pwd checking whether builddir is srcdir... yes checking for