similar to: Urgent question.

On Tue, 27 Nov 2007, Alex Balashov wrote: > > Our provider gives us four PRIs as a trunk group hunt group. Meaning, the > provider's switch will cycle through B channels in span 1, 2, 3, ... until > it finds one that is available. > > I have moved spans 2-4 onto another machine. But we have one remaining > box with a PRI full of calls and I don't know what to do

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

I have a customer installation with an Adtran DS3 mux. The DS1's go into my Asterisk servers that run IVR/Call recorders. The DS3 provider is Qwest, and they tell me that they routinely drop the DS3 service to redundant back-up's and that this is a common practice that happens thousands of times to DS3 lines daily across the US without any service interruptions. They say that the

Hi all, I am having a very strange problem. I am terminating a PRI (5ESS switch type, national plan, 23B+1D (24)) into a Sangoma A104 and am not able to produce any audio heard on the PSTN end of the call. Not sure what's wrong - the card worked before under a Trixbox setup. I'm running kernel 2.6.19 (tried 2.6.24.3 but had to downgrade as wanpipe stuff would not compile), zaptel

I've got the ztdummy kernel module loaded and seem to have all the desired prerequisites in place, but Asterisk never seems to compile with MeetMe() application support enabled, nor does there appear to be a module I am failing to load that would contain this application. Is there something really obvious I am missing? Thanks, -- Alex Balashov Evariste Systems Web :

Hello all, I need to install asterisk for 900 sip users with 2 PRI ports. It is posible to handle this number of calls/extensions with only one asterisk machine? Which is the best way to install that? two asterisk with openser. One asterisk with openser ..... Is it necesary run a SER server on this enviroment? Any clue will be welcomed. Thanks in advance. VoipCrazy

http://www.theregister.co.uk/2008/12/01/richard_bennett_utorrent_udp/ FUD? Interesting? Boring? New news? Old news? -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (706) 338-8599

Hi, I have read about SS7 recently and learnt that it is a signalling protocol used in PSTN for call management, setup, etc. The thing that I don't understand is how SS7 plays a role in VOIP. When I make calls between landline and Asterisk via PSTN, I don't need to do anything with SS7. Is it because the SS7 signalling is already done by Asterisk already? From the prespective of

Has anyone figured out a way to instantaneously swing over PRIs bearing calls in progress to another media gateway without dropping them? Obviously, this would require a DACS of some sort. But I am thinking that it is possible to swing T1s over in a DACS without actually causing the endpoint to reframe as long as the other endpoint is kept in sync. So, it'd be nice, for example, to bring

So, is there anyone out there that provides rather generic but comprehensive CNAM-style directory services via SIP, to end-users? So I can put names to my calling numbers? Thanks! -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671

All, I have done research on VoIP for some time now. I'm a Cisco certified Network Engineer however Telecom is not my strongest suit. I've been a part of this mailing list for sometime but my delusions of grandeur in migrating our 25 year old phone system to a new platform have been on the back burner, until now. I have found my company is moving to a new location(building) and this

Hi, I've sucessfully completed an Openser 1.3.2 + Mediaproxy 1.9.1 + Asterisk 1.4 + CDRTool with freeradius telephony system. Asterisk is used only for voice mail and redirectioning calls. Every calls should pass through mediaproxy so that i can account them. The goal was to create a simple prototype of what could be a VoIP provider. Now i need to dimensioning this system to work

Hello, I've this situation: 300+ simultaneous calls and dialplan like this: exten => _X.,1,Answer() exten => _X.,2,DEADAGI(check_status.php) exten => _X.,3,Dial(SIP/other/${NUMBER}) exten => _X.,4,Hangup exten => h,1,DEADAGI(cdr.php) When project is running , I had a lot of defunct php scripts (I've exceed mysql connection limits and so on, deadagi help a bit). The

Hi All; I do not know if anyone faced such case in dealing with open vpn (as we need it for fring to be used from the mobile: Which mobile can be used to install the open vpn client on it, so we can use it to do a vpn channel with the server that has open vpn server? Regards Bilal

I made a little write-up that attempts to synthesise a lot of the information out there about how to get HylaFAX working with Asterisk by way of IAXmodem for inbound faxing: http://blog.evaristesys.com/?p=24 Of course, there are bound to be some things I've left out or are grossly in need of correction. So, before I link it off the voip-wiki I am extremely eager to solicit the input of

I'm sure this has been asked a million times before, but is there an easy wa to have Asterisk register more than one (distinct) contact binding concurrently? The goal is to have two phones register with the same credentials from different locations and consistently and reliably ring on inbound calls, irrespective of their registration intervals and so on. -- Alex Balashov Evariste Systems

Inspired by AG Projects' Adrian Georgescu's post of Eric S. Raymond's classic "How to Ask Questions the Smart Way" to the OpenSIPS-users mailing list[1], I'm going to repost it here: http://www.catb.org/~esr/faqs/smart-questions.html As Adrian said, "This a good read for those who show up on mailing lists without any guidance about how to ask the right

Greetings, I have a very basic equal-weight ring-all queue set up in queues.conf: [sales-queue] ;music = default strategy = ringall periodic-announce-frequency = 20 announce-holdtime = no timeout = 15 maxlen = 0 member => SIP/1xxxxxxxxxx at junction_networks,1 member => SIP/1xxxxxxxxxx at junction_networks,1 member => SIP/dude,1 member => SIP/homie,1 member => SIP/fellow,1 But

Is there a way to dynamically alter the sip.conf properties of a SIP peer in runtime without doing a SIP reload? I am specifically thinking of enabling reinvites for users dynamically based on whether they are registered from a public address. -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671

Hi all, This may be a really stupid question, but, what preset global dialplan variables can I use to determine the calling leg when using Dial()? Say I have phones (SIP peers) originating calls out of the same context, and I need to set the ANI differently depending on who is calling out in order to make it consistent with their inbound DIDs? Asterisk appears to provide a wealth of variables