similar to: Help: Static and dropped calls

Hi, I am having trouble making a selection when I call a number and need to make a selection to go to an extension with my polycom phones 301. Anybody have an idea how to fix this problem? Thanks in advance. Jarga Jallow Technical Support Engineer 2985 S. Hwy. 360 Grand Praire, Texas 75052 Direct: 972-206-1212 ext# 29 Mobile: 214-669-9046 Fax: 972-999-4113 Toll Free: 1-877-801-5511

Under asterisk info: Sip registry 12/12 76.xxx.xxx.xxx D N 5066 UNREACHABLE 11/11 76.xxx.xxx.xxx D N 5064 UNREACHABLE 10/10 76.xxx.xxx.xxx D N 5062 UNREACHABLE All these IP phones are behind NAT. What could be the problem? Thanks in advance. Jarga -------------- next part -------------- An HTML

I have a Linksys sipura phone which does not dial ext 26 only, every other ext works. When I dial ext 26 it show to:0 instead. Does anybody know how to fix this? Thanks in advance. Jarga Jallow -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071121/fd2d139f/attachment.htm -------------- next part

I am getting this error under system info: File Line Command Message common_functions.php 314 file_exists(/proc/scsi/scsi) the file does not exist on your machine Does anybody know how to fix this? Thank you in advance Jarga -------------- next part -------------- An HTML attachment was scrubbed... URL:

I need help with my grand stream GXP2000 phones they keep freezing randomly. Any ideas? Jarga -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071101/0f180a43/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 3781

Hello, When I tried to install chan_h323-1.0.1-module.i386 RPM i got these errors. Failed dependencies: libh323_linux_x86_r.so.1 is needed by chan_h323-1.0.1-module.i386 libpt_linux_x86_r.so.1 is needed by chan_h323-1.0.1-module.i386 But i found the same files in /usr/lib/libh323_linux_x86_r.so.1 /usr/lib/libpt_linux_x86_r.so.1 What to do for asterisk to detect the same

Hi, all. I'm probably doing Something Dumb(tm), so please feel free to point out whatever I'm missing, no matter how stupid. Anyway, I've got IAX set up to Vitelity. When I try to call my DID, I get: Rejected connect attempt from 64.2.142.19, who was trying to reach '6031234567@' This leads me to my first question -- why doesn't it show a context? (My second is,

Ok Dan, try this... I was able to get this to work behind a NAT and with ip address authentication. [global] type = global debug = yes [transport1] type = transport bind = 0.0.0.0 protocol = udp *local_net=<yourlocalnet I.E. 10.10.10.10/24 <http://10.10.10.10/24>>external_media_address=<your public ip address>external_signaling_address=<your public address>*

On Mon, Dec 15, 2014 at 3:54 PM, Dan Cropp <dan at amtelco.com> wrote: > > Yes, everything is behind the same NAT. > > > > For the application I?m working on, the only endpoint is the endpoint to > Vitelity. > > We use AMI to Originate calls from Asterisk endpoint through Vitelity to > phones. > > After that, we control the call through AMI to perform the

Here's an update... My network admin would not turn off the ALG because it would cause several other problems to other phone systems we have. He looked at the sip trace. What he found is the PJSIP trace showed a different IP address than the older chan_sip so he had me change the aor contact to outbound.vitelity.net At this point, it seems to be working (and this is going through a Cisco

On Mon, Dec 15, 2014 at 7:34 PM, Dan Cropp <dan at amtelco.com> wrote: > > I am not sure if I entered the correct settings for the transport > information. > > For the local_net, I entered my local ip address, but no mask. I will > check with the network admin so he can verify the settings I entered. > > > You need the network and mask. For example if the ip

On Mon, Dec 15, 2014 at 3:33 PM, Dan Cropp <dan at amtelco.com> wrote: > > Hi George, > > > > Thank you for looking into this. > > This is behind a nat? > > > Just to be clear...both the pbx and local endpoints are behind the same NAT? > [global] > > type = global > > debug = yes > > > > [transport1] > > type = transport

Not sure why, but Vitelity changed the settings to IP based authentication on me. Here's the new sip.conf settings they sent me. type=friend dtmfmode=auto host=64.2.142.93 allow=all nat=yes canreinvite=no trustrpid=yes sendrpid=yes When I use these settings to originate calls using the sip.conf they sent me, everything works. Action: Originate ActionID: S8 Channel:

On Mon, Dec 15, 2014 at 9:48 PM, Dan Cropp <dan at amtelco.com> wrote: > > Thanks George. > > I will correct my local_net in the morning. > > Vitelity chan_sip settings I have working, do not have a fromuser. > sip.conf settings... > > I think you can actually specify anything, it just has to be populated with something other than a sub-account username. >

Dan Cropp wrote: > I corrected my local_net setting (based on advice from network admin). > > I have tried several different values for the from_user and still have > the same problem. > > Asterisk receives the OK from Vitelity. > > Asterisk sends the ACK (without a Contact header). A Contact header is not required to be in the ACK. > > Vitelity doesn?t seem to

I have a Vitelity DID which generally works, but calls from a particular caller do not reach it. Vitelity has thus far disavowed any responsibility for working through this problem. I recognize that some action might be required by another provider which is outside Vitelity's control, but it seems that they should at least be trying to help resolve the problem by helping me determine

Any vitelity customers with pbxinaflash boxes? I'm able to call in-house, but failing to make outbound calls. My assigned server at vitelity is not reachable. I can ping to my ISP OK. Any help appreciated. Such as actually how to make email contact with support at vitelity. They're not responding. Thanks, Tom

I have a block of DID's that I ported to Vitelity about 7 days ago. The problem is if a POTS caller dials into the system, his dtmf is not heard at READ() or Background() while a prompt is played. After the prompt is finished, then dtmf is heard. I've been working with their support, but it still not resolved. SIP callers are not effected. Yesterday, I purchased a DID from

I am running PJPROJECT 2.3 and Asterisk 13.0.0. I answer the call, about 15 seconds later, vitality hangs up on my cell phone. However, Asterisk is never notified When the OK (for the answer) occurs, the ACK seems to never be accepted. The OK recvd with ACK sent occurs several times. Here are the pjsip.conf settings... [global] type = global debug = yes [transport1] type = transport bind =

On 8/9/16 12:40 PM, Matt Fredrickson wrote: > On Mon, Aug 8, 2016 at 9:25 AM, Tammy Firefly <tammy-lists at wiztech.biz> wrote: >> Hi All, >> >> We have asterisk 11.23 running sip to vitelity and from there IAX trunks >> split off to where they need to go. We are having a problem getting >> chan_sip to quit ignoring re-invites from Vitelity. Our side ends