similar to: sip show peers in 1.4.13

Hi All, I am new to both Asterisk and PBX stuff. I have 3 Tohiba PBXs in 3 separate offices as follows, Toshiba Strata dk28 Toshiba Strata dk280 Toshiba Strata dk8 I need to install 3 Asterisk servers in these 3 locations and integrate them with each of the Toshiba PBX s. This is to give IP Phones/soft phones to the users and to route these VOIP calls through the PBX to POTS. What are the

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

I am trying to test the call parking, but It doesn't fonction :(these are my config files.extensions.conf:include=>parkedcallsexten => 4000,1,Dial(SIP/4000,60,tT)exten => 4001,1,Dial(SIP/4001,60,tT)exten => 4002,1,Dial(SIP/4002,60,tT)In features.conf:[general]parkext => 700 parkpos => 701-720 context => parkedcalls [featuremap]blindxfer => # disconnect => *0

We have an installation with around 50 sip phones but only 5 of those are hardware. There are three Grandstream phones, one Snom and one PAP2T. We are running Asterisk 1.2.8 with an E1 (R2). Only the hard phones are having problems which are either echo or distortion. The softphones all work fine and no one is reporting any problems. They are using 3Com switches which are fairly new. I

Hi all, A first basic version of DIAX as an ActiveX can be downloaded from: http://www.laser.com/dante/diax/activediax.zip There is only one small file (diax.ocx) and a readme.txt with the usage instructions. For the moment you can only place authenticated (or not) calls and there is no feedback (ring, messages, etc) Put this simple thing on your web page and you will be able to dial from any

Hi all, i never understood that why is there 2 branches of asterisk going on parallel. asterisk 1.2.* and asterisk 1.4.*, i also heard about beginning of another branch which will be 1.6.*. so whats the difference between these 2 or 3 versions, can anybody plz tel me? -- Rizwan Hisham Software Engineer AXVOICE Inc. -------------- next part -------------- An HTML attachment was scrubbed... URL:

When doing a "sip show peers" I might see something like: Name/username Host Dyn Nat ACL Port Status devcentos5x64_to_mmfirepa 192.168.1.177 5060 Unmonitored devcentos5x64_to_bt610tMM 192.168.1.159 5060 Unmonitored devcentos5x64_to_am2mm/de 192.168.1.178 5060

Hello sip show peers does not mark hosts as NAT even though sip.conf and sip_peers table has nat=yes. spitfire*CLI> sip show peers Name/username Host Dyn Nat ACL Mask Port Status voipuser.org/gdsm 216.127.66.119 N 255.255.255.255 5060 Unmonitored 5560/5560 192.168.4.5 D N A 255.255.255.255 5060

Hi all, What does (T) mean on the output of "iax2 show peers"? The following my output. darkstar*CLI> iax2 show peers Name/Username Host Mask Port Status ronaldo (Unspecified) (D) 255.255.255.255 0 UNKNOWN sp/ata 201.26.67.102 (S) 255.255.255.255 4569 (T) UNKNOWN 2 iax2 peers [0

Hi people, pls does anybody know what "(T)" and "(D)" letter means? server3*CLI> iax2 show peers Name/Username Host Mask Port Status SERVER1 xxx.xxx.xxx.xxx (D) 255.255.255.255 9785 (T) OK (29 ms) SERVER2 xxx.xxx.xxx.xxx (D) 255.255.255.255 4569 OK (95 ms) 2 iax2 peers [2 online, 0 offline, 0

Hello. >> ubuntu*CLI> sip show peers >> Name/username Host Dyn Nat ACL Port Status >> voipprovider xxx.xxx.xxx.xxx A 5060 Unmonitored I've ben trying to connect an asterisk server to a voip provider, and I'm currently wondering what the 'A' in the ACL field of the 'sip show peers' command might

Hi list! I have a problem and I hope someone can help me... I configured an Asterisk on a VM to serve more accounts and act as a proxy to other SIP-providers. The first account running on my phone works without any problem. A second account, running on the phone of my wife, is always UNREACHABLE. I can just see in the log: [May 28 21:48:46] NOTICE[3646]: chan_sip.c:22933 sip_poke_noanswer: Peer

Ok, so this might seem weird, but hang with me on this. I have two sites, Indy and Lafayette that each have their own Asterisk server. They each have their own outside PRI line. They are also trunked internally via and IAX tunnel over a private fiber line. I've recently been asked to have the calls incoming to Indy, forwarded to a group in Lafayette (only during the day, so can't be

Hi there: We have recently inherited a circa 1996 SGI Indy Colorbus Cyclone running on Irix. Our intention is to use this unit to drive our Canon CLC900 Scanner Copier and make it accessible to our Windows Network. At the moment, our Windows Network does not "see" the Cyclone & vice versa. I have read that installing some kind of Windows Samba client onto our windows

How to change status of peers "Unmonitored" to monitored? Home users showing "Unmonitored" some display timing. Name/Username Host Mask Port Status zoiper_kathy/zo 112.200.83.69 (D) 255.255.255.255 9330 Unmonitored clinic_server (null) (D) 255.255.255.255 0 Unmonitored voip

Hello, I noticed Asterisk 1.8.4.1 execute number dial twice Log == Using SIP RTP CoS mark 5 -- Executing [912066604 at sipphones:1] Set("SIP/4773-0003e920", "CALLERID(num)=2066604") in new stack == Extension Changed 4773[sipphones] new state InUse for Notify User 4701 -- Executing [912066604 at sipphones:2] Dial("SIP/4773-0003e920",

hallo all, i would like to know, as i would suspect, nativ bridiging should work also, if only one iax party is behind an nat router and the other has a public ip. when i connect to iax clients, which have both pubic ip's nativ bridging is working. if one of the clients is behind an nat, the iax2 channels always get routed through the asterisk server (latest stable version from cvs) ?? i

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in