similar to: SPA-841 vs Grandstream GXP-2000

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Hi When I make a call with the Grandstream GXP-2000 through Asterisk (and SER) to landline using VSP, after I hang up the call the other party are still connected for another 30-40 seconds. I've notice that the SIP BYE is sent to Asterisk, but Asterisk sends no SIP BYE on to VSP. When I use the SPA-941 the call terminates on the other right away soon as I hang up. I have updated the

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Hi People, We use the Grandstream GXP-2000 phones, firmware 1.1.1.14, Asterisk PBX, Slackware Linux 10.2, loaded on a Intel(R) Pentium(R) 4 CPU 2.66GHz Box... The issues that we are experiencing involves our Telephone Operator's/Receptionist whom answer multiple incoming calls... As an example.., when they answer line 1 and Line 2 starts to ring they would ask the person on line 1 to

Hi all What headset do people use with the GXP-2000? Any recommondations for or against particular models? Thanks Peter -- Peter Bowyer Email: peter@bowyer.org Tel: +44 1296 768003 VoIP: sip:peter@bowyer.org

Hi, I looked at the docs and probably missed it: is there a way to set a dialplan on the GXP-2000? (to avoid having to press "Send") Thanks, -- "Computers are useless. They can only give answers." - Pablo Picasso

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

I have 5 GXP 2000's with firmware 1.1.4.25 running with Asterisk 1.4.13. Is anyone else getting the following error in the asterisk console: [Oct 22 11:39:01] WARNING[7100]: rtp.c:1142 ast_rtp_read: RTP Read too short every couple of seconds when a handset is in a call? I didn't notice this happening when I was using an older GXP2000 with the same firmware (doesn't mean that it

Hi, We have a page on the wiki just for phone reviews, but I think it needs a bit of format change. Instead of individual reviews for each phone, I think each person should review all phones they have worked with and list the phones they have had access to and rank them in relation to each other. Also each review should have a date so the reader can see how fresh the data is to current.

Can anyone here have experience using G.722 on the Grandstream GXP-1200? It's supposed to support the codec, but I wonder if the handset does it justice? The older BT-200 also supported the codec, but the handset was not good enough. You could only hear the improved call quality using a headset. Michael Graves mgraves <at> mstvp.com o(713) 861-4005 c(713) 201-1262 sip:mjgraves at

I am looking at some lower cost phone to use with Asterisk. What is the ArtDio IPF-2000 or the Sipura SPA-841 like? Also, I see voipsupply.com has an ArtDio IPF-1000 listed, is this a new or an old model? I cannot find any information on it. Adi

Hi, I have Grandstream GXP-2000 connected to Asterisk, and Asterisk has trunk to VSP for PSTN calls. When ever I place local PSTN call, the landline doesn't hang up right away (40 sec), when I hang up the GXP-2000. The GXP-2000 seems to have problems making international calls as well. Where it hangs up soon as the other party picks up. I have used different IP phones, VSP's and etc.

Anyone having problems with registration to * from a SPA-841? I got a SPA-841 a week ago. I noticed that sometime it could not be reached (dialed to) and it can't dial. In this case the line LED is yellow. I enabled logging to syslog and there is a hint as to what happens. For some reason sometimes it gets "401 Unauthorized" Any ideas what is happening and how to fix it? Phone

Can anyone who has used both comment on the pros and cons ? Need to buy about 30 of these, for a small company with limited IT support. Julian ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email

On my Grandstream GXP 2010 I have the possibility for 6 channels and thus 6 different accounts... Line 1 I define an account that registers directly to an online Asterisk-server, somewhere in a datacentre. Line 2 I define an account that registers to the local Asterisk-server (NSLU2 unslung) When I activate both accounts, only the first account (to the Asterisk-server on the internet) registers.

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

I'm running the latest firmware on the SPA-841 and have a problem with echo. The echo occurs on all calls (PRI ISDN on a E110p or SIP) and is not present when I use the SNOM190 phones so I can def. isolate it down to the SPA-841s. The codec used is g711u and the phones are on their own dedicated 100mbit switch with no other traffic. The server is a 3Ghz PIV sitting at 99.9% idle all

I occasionally have to remotely configure and reboot customers' grandstream phones. I use tftp, so make changes in the tftp config files, but then need the customers manually reboot the phones. How can I reboot the phones myself remotely. -- Zeeshan -------------- next part -------------- An HTML attachment was scrubbed... URL: