similar to: Compatibility Issues with dell poweredge 1950 and TE110P card

> They instantly got us to look at the output of zttest and we found that this was (in their words) 'extremely low', with 'best' and > 'worst' readings of 99.975586% and 99.963379% respectively. Might want to give PCI latency setting a try, it helped for me. My ZTTEST would drop occasionally to 99.95% until I set: setpci -v -s 01:01.0 latency_timer=ff

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

I have 4 gig in my * box. I'm tuning for performance and I'd like to ask opinions: 1. asterisk -p == renice -20 ?? 2. I've turned off swap with no apparent ill effects. Can anyone commment on long term effects with moderate load (say, 30 SIP phones / 2-3K calls /day) 3. Can anyone comment on using ramdisk as swap and whether this is a good idea or bad idea? I'm using 2.6

I am running Asterisk 1.16.2.13, dahdi 2.4.0 and libpri 1.4.11.4 on an HP ML110 G6 using Ubuntu Linux 10.04 LTS. I have two Digium TE121 single T1 port cards and a Digium AEX800 8-port FXS card. All PCI Express cards. Co-workers are hearing hissing sounds on some calls, and I am getting IRQ errors when running "dahdi show status". I see that sharing IRQs for Digium cards isn't

I ran some iperf tests today and it looks like the etherbridge is the limiting factor on throughput. In the beforetime, I saw great throughput to the VMs; over 800 Mbps. With the bridge, the numbers are in the 400s somewhere. Is this the speed I can expect from the bridge? Is there some tuning I should try, or another way to get more bandwidth into the VMs? This is with xen-2.0, 2.4.27-xen0

If a PCI device has been passed to a domU is it possible to set its latency from the domU or does it have to be done from the domO? When I attempt to set a devices latency from the domU with setpci I do not receive an error message back indicating a problem, however the latency as viewed with lspci -v is not changed. The same setpci command from the dom0 successfully changes the latency and the

Hi all, We're planning an Asterisk implementation consisting of two SC1425 Dell Servers using Digium T1 cards and SATA drives. The problem I'm having is the only PCI slot shares an IRQ with the SATA controller. Any altering of one device's IRQ takes the other device's IRQ with it in lockstep. I've disabled all non-essential integrated devices with no change. I'm a

Hi, > BTW: is there a tool (or pciutils patch) which can decode the virtio > capabilities? Searched for a patch today, and all google found me was this mail asking for one :-o So I went ahead and coded one up. Attached. While hacking it up I've noticed spec doesn't match reality. The "Virtio Structure PCI Capabilities" section here ...

Hi, > BTW: is there a tool (or pciutils patch) which can decode the virtio > capabilities? Searched for a patch today, and all google found me was this mail asking for one :-o So I went ahead and coded one up. Attached. While hacking it up I've noticed spec doesn't match reality. The "Virtio Structure PCI Capabilities" section here ...

Hi, I've read through the Asterisk handbook and I'd just like clarification from someone that's implemented the above before. Lets imagine I want to use the CallingCard application and don't want to tell a client to buy a channelbank (the analog extensions are too many to connect to FXS cards), I figure I could set them up as below: Original Existing Setup

https://bugs.freedesktop.org/show_bug.cgi?id=75985 Priority: medium Bug ID: 75985 Assignee: nouveau at lists.freedesktop.org Summary: HDMI audio device only visible after rescan QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: Linux (All) Reporter: jean-louis at

Hi, I try to dial out through a Provider, but for that i need to be authenticated - it actually does not work !. What kind of dial command do i have to use when i: - Want to authenticate the user - And dial with that authenticated user an extension What i tried so far exten => _7.,2,Dial(SIP/USERNAME:PASSWORD@PROVIDER.COM/${EXTEN:1}) what have i done wrong ? i always get back a Service

On Fri, Aug 24, 2018 at 11:42 PM, Peter Wu <peter at lekensteyn.nl> wrote: > Are these systems also affected through runtime power management? For > example: > > modprobe nouveau # should enable runtime PM > sleep 6 # wait for runtime suspend to kick in > lspci -s1: # runtime resume by reading PCI config space > > On laptops from

Hello List, first let remind the question and the answers: http://www.networkupstools.org/docs/FAQ.html#_my_powermac_g4_won_8217_t_power_back_up_by_itself_into_linux_after_the_ups_shuts_down_what_can_i_do_about_this As a matter of fact my box is not a `Power Mac G4' but a `mac mini server' (macmini4,1), and it is Linux Debian box (Squeeze): the main issue is that the box does not boot

Hello, I've released an Asterisk application under the terms of the GNU GPL. You may find it here: http://psg.com/~begg/projects/ A short exerpt from the README: -- Broadcast is an Asterisk (http://www.asterisk.org) application which you may use to send a generic message over TCP/IP to any number of computers running software configured to listen for these types of messages. Being written

Hello, Could anyone please give some information on configuring asterisk as a gateway. What contents have to add in h.323 .conf and extensions.conf files ? Thanks & Regards Bincy K Philip -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071102/53be51ce/attachment.htm

Guys. I have an issue with a te110p card and also some tdm04b cards on the same system: Zttest returns this for the tdm04b cards: [root@mollendo ~]# /usr/src/zaptel-1.2.4/zttest 38 -v Opened pseudo zap interface, measuring accuracy... 8192 samples in 8191 sample intervals 99.987793% 8192 samples in 8192 sample intervals 100.000000% 8192 samples in 8192 sample intervals 100.000000% 8192 samples

Hi I just got an AA50 from Digium and the paging command reboots asterisk when you use it. Digium says it is a requested feature and is of low priority. Is there any other way to page 10 Grandstream gxp2000 phones with meetme or some other command than the page command. Thanks in advance. Kelly -------------- next part -------------- An HTML attachment was scrubbed... URL:

Well, after our first real extended power outage, I found out that even though the UPS 1000 RM is recognized okay, it does not work properly. It never seems to see any change in UPS status. It looks very similar to the other issue I reported with the APC CyberFort 350. I never was able to get to the bottom of the CyberFort issue, but I'll bet it's the same issue as we have with the

nic@wuwei:/usr/src/xen/xen-unstable.hg$ sudo xm create breezy -c Using config file "/etc/xen/breezy". Started domain breezy Linux version 2.6.12-xenU (nic@wuwei) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #3 SMP Thu Oct 13 14:56:20 NZDT 2005 kernel direct mapping tables upto 10000000 @ 568000-5ea000 Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 lockd.udpport=32768