similar to: Registering Multiple SIP Accounts on One Server to Another Server

Hello, I've found a little documentation on voip-info and on the asterisk- users list, although I was hoping for an example of a tried-and-true failover setup between PRI and SIP. We are an outgoing call center that uses asterisk 1.4 connected to 2 PRIs from the local telephone company in one group (g1) and a SIP trunk from bandwidth.com. The PRIs are the primary outgoing service,

Is anyone doing this or has anyone tried? The thin clients are running WindowsCE, a browser, and 300mhz. They are Wyse units. I wonder if anyone has any practical advise or can recommend the best phone or method to load a stable softphone on one of these boxes? Thanks, Steve Totaro

I can ping it just fine. I am on gw5.voicepulse.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040615/054c83f4/attachment.htm

Zitat von Steve Totaro <stotaro at totarotechnologies.com>: > Are you using the wifi on on the cellphone? The peer IP is showing as > 192.168.200.3 which is not a routable address. Unless things have changed, > double NAT configurations do not work. Hi Steve, My Asterisk is behind a NAT, but my cellphone was NOT in NAT, but direct in Internet. But maybe my Provider does a

Also posting this question to people working on manager interface and dialers. I have a simple auto dialing script (using Originate) that forwards all incoming calls to a queue full of waiting agents instead of a meetme conference room. I use queues rather than meetme so I can leave the automatic call distribution to the queue itself. The problem is when the calls reach the agents, some of the

Since it is Saturday evening (7PM EST) I am asking this on the list in case someone who knows sees it and can answer. Astricon is in my back yard for the first time, and I could hit you with a rock. I would always like to attend, and spoke at the 2007 Astricon in Phoenix but don't have the idle cycles. Question: Can I just go to Astricon and take the dCAP exam only? In and out? Cost? I

Unbeatable price for a low end Asterisk server (or any server for that matter) http://configure.us.dell.com/dellstore/config.aspx?c=us&cs=04&kc=6W300&l=en&oc=bednv4k&s=bsd I wonder if anyone has any experience with this box and Digium or Sangoma hardware? Any compatibility issues? If not, I might stock up on them. Thanks, Steve Totaro -------------- next part

Is there anything special that anyone here has had to do to get an Aastra phone (on the Internet) to talk to Asterisk behind a PIX firewall? Ports 10000-20000 UDP are open on the PIX and forwarding to the Asterisk server. The Asterisk server's RTP.CONF is set to use 10000-20000. The phone registers, and will place AND receive calls, however, no audio is passed. The phone is an Aastra

Hello: Have a TE110P laying around and decided to see if I could build a router around it. I've tried compiling several versions of zaptel .1.4.x with the same results. I checked the zaptel changelog and can't find anything about it no longer being supported (or that it ever was for that matter). ztcfg: Zaptel Configuration SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

hot to asterisk multiport...??? example 5060, 5061, 5080 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070815/8a515309/attachment.htm

Yes, I purchased licenses for Fax for Asterisk and yes I called tech support and had the WORST experience I have ever had with any technical support call. I am running Asterisk 1.6.2.6 and: FAX For Asterisk Components: Applications: 1.6.2.0_1.2.0 voipgw01Digium FAX Driver: 1.6.2.0_1.2.0 (optimized for c3_2_32) The guy was arrogant and absolutely a jerk and I don't like to call

Asterisk 1.2.24 seems to crash repeatedly under any substantial call load (and sometimes without a substantial call load - just one SIP leg is enough to do it) when using the G.729 pre-compiled binaries from: http://asterisk.hosting.lv/ As per: http://www.voip-info.org/wiki-Asterisk+G.729+Licensing Time to crash is variable, but seems to require at least an hour of production performance

Does anyone know how to setup a linear type of queue strategy? By that I mean that agents will be tried in a particular order and the call will be routed to them unless they are on the phone or not logged in. I want a 3rd party app to be able to re-arrange this order on the fly based on sales and other metrics. Anybody setup something similar? Any pointers or products already out there open

Great for Chan_Mobile and GSM modem for SMS in Kannel or if Asterisk supports SMS over GSM modem. I know chan_mobile had SMS in the future at one point but have not revisited the project since. "America Movil's MVNO TracFone Wireless quietly unveiled a prepaid, nationwide unlimited offering for $45 per month that includes unlimited text messaging and 30 MB of data."

Hi, I am new user on asterisk (for that matter linux) and i have lot of embedded programming experience. We have a new project from our client, to design a box that takes the telelphone line as input and route the line to the respective user with different ring tones. The box should be programmed by the users with buttons. Features. 1. I should be able to store some .wav files for different

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

I need your help: please help test the gender detection module at 575-613-4392. I wrote a gender detection module and thought I'd try it out. It only takes a second. I've been showing 90%+ accuracy and I want to make sure it's working correctly. Rain and significant background noise seems to throw it off, so I still have a bit of work to do. Have your friends and significant others

I setup a number of remote phones on public IPs using the web interface. Now my question is how do I change the default Polycom:456 password via the web interface. Is there a hidden way or does it have to be done via FTP TFTP? Thanks, Steve Totaro