similar to: Doesn't seem to want to transcode.

Hi all, I'm trying to get moh working on * version 1.4.4. I've setup a test extension that answers the call and runs the musiconhold command with the appropriate class name. All I get on the phone is silence. The console tells me that moh started and immediately stopped, but it complains that there is "No class: moh0" *CLI> [Feb 22 12:17:36] WARNING[31142]:

Hi all, I've got a problem where many times, there is silence at the first 1-2 seconds of a call. Then it clears up and it's crystal clear. I've not put a sniffer on it, yet, but I suspect that the media channel is still being set up. The server shouldn't be too overloaded. Can anyone give me some advise on how to solve/mitigate this problem? Mike.

Hi all, I seem to be having a strange problem with a sip trunk. On a fairly frequent basis, I'll make a call, ore receive a call, and there will be NO sound. The strange part is that both endpoints are public IP addresses so NAT isn't in play and a sniffer trace reveals that the packets simply aren't being sent. It only seems to happen on a particular trunk. The same phone

Here is something I wrote years ago. I expect you can adjust it for your needs # cat remove_blank_vmail #!/bin/bash # remove_blank_vmail takes arguments as voicemail boxes and removes messages with audio files shorter then MINSIZE (in bytes) #---------------------------------------------------------------------- # Description: # Author: John Harragin Monroe-Woodbury CSD # Created at: Thu Nov 6

Hi all, I'm trying to tighten things up a bit and I seem be be running into something that doesn't make sense to me. I've got 2 contexts, one for customers, and one for guests, that I include into [customers] and [default], in extensions.conf, as below: ============================================================= [default] include = dial_GUEST [customers] include = parkedcalls

Hi all, Lately, I've been seeing more and more instances where I get a flood of warning messages like this: [Apr 26 14:09:50] WARNING[21054] udptl.c: No UDPTL ports remaining The next thing I know, my server is dropping calls and starting to misbehave. I use fax via T.38, so I can't just turn udptl off. I could expand the port range, but I suspect that will just mask the situation.

Hi all, I'm trying to get outgoing fax working from an SPA2102 to a PSTN fax machine via a T.38 enabled trunk.? I've got t38pt_udptl = yes faxdetect=no in my sip.conf file.? The ATA has all of the T.38 options turned on, echo cancellation is off, as well as silence suppression off.? The only configured codec is u711.? When the user tries to send a fax, it gets to the point where it

Hi all. I'm in the process of configuring a phone system for my family and friends. I'm wondering if I should try to implement the "Vertical Services" (http://www.nanpa.com/number_resource_info/vsc_assign) in the Asterisk dialplan, or if I should delegate those functions to the various ATA's. For example, the Sipura SPA 2002 can handle*69 internally. On the other

Hi All, I have recently installed a TC400B card into a system and am trying to get it to work. As far as I ca tell from the docco on Digiums website, there is no config as such unless you want to enable / disable only 1 codec, otherwise by default it runs as 92 channels of either. I have tried asterisk 1.4.9, 1.4.10 and 1.4.10.1 along with zaptel 1.4.4 and addons 1.4.2. The zaptel modules

Hi all, Is it possible to send a SIP header to a PAP2T or SPAxxxx and cause the device to automatically answer? I can do this with my Polycom phones and would like to do it with my ATA's. Any ideas? -- Take care and have fun, Mike Diehl.

Hi all, I've cross-posted this to the -users and -biz groups. Hope that's OK. I have a customer who REALLY needs to be able to send/receive faxes reliably. I could probably get hylafax configured, but I'm not sure how reliable it is. If it is considered reliable, would someone let me know? Otherwise, is there a product/service they can buy that will allow them to fax to/from

Hi all, I have 2 servers running 1.6.2.9 and I'm about to build a third server. This suggests the possibility of doing a rolling upgrade of all of my servers. This brings up the question of what version to install and upgrade to. I don't have many upgrade opportunities, so I'd like to get as much bang for my buck. Since I've applied some custom patches to my 1.6, I'd

Hi all. I could have sworn this working at one time... But it doesn't look like any of the functions provided by features.so is working for me. (one-touch monitoring, attended/blind transfer, etc) I've (re)loaded features.so, as well as bridge_builtin_features.so. The config file looks sane. What else should I try? TIA, -- Take care and have fun, Mike Diehl.

Hi all, Does anyone have any good/bad comments on the A1200P 12-port fxo/fxs card from OpenVox? I'll be using one to with 8-12 fxo interfaces.? The cards will be plugging into a cable-modem / phone adapter.? We weren't able to port the numbers, so we're going to use the existing PSTN connection and replace all of the office phones. With these short distances, will I need to worry

Hi Group, actual i have a transcode problem and i have no idea to solve this. All my wav files are alaw encoded and i allow only alaw codec. But sometimes the WriteFormat is slin and if i recall the same number the WriteFormat is alaw for the Channel. Why the channel has sometimes slin and sometimes alaw? NativeFormats: 0x8 (alaw) WriteFormat: 0x40 (slin) ReadFormat: 0x8 (alaw) WriteTranscode:

Hi all. I'm looking to change from a standard telephone line to a VoIP phone line at home. I'm looking for recommendations for VoIP providers that I can use with Asterisk. One of the catches is that I often telecommute and sometimes I do some side business; these practices violate many provider's acceptable use policies. So, I need a provider who doesn't care how I use the

Hi all, While trying to track down a T.38 issue, I came across a series of log entries like this: ============================================================================ [Jan 26 10:23:31] WARNING[32508]: udptl.c:948 ast_udptl_new_with_bindaddr: Unable to allocate socket: Too many open files [Jan 26 10:23:31] ERROR[32508]: acl.c:488 ast_ouraddrfor: Cannot create socket

Hi all, I need to be able to delete a voicemail message using a program. Is is sufficient to simply delete the .wav and .txt files in the spool directory? Or do I need to also renumber the remaining files? For example, let say a given mailbox has 20 messages in it and I want to delete message number 5. Can I just delete the 2 files and expect that asterisk will renumber them? Or do I

Is there a way to not have a transcode happen when saving voicemail? ie. the voicemail gets stored in the same format that the channel calling it is using - g711, gsm, g729, etc. ? Just playing with some really weedy processors and wanting to avoid transcodes at all costs... Gordon

Thank you for your time. I've put my replies to your questions in-line, below. On Wednesday, June 07, 2017 10:19:41 AM Antony Stone wrote: > On Tuesday 06 June 2017 17:54:59 Mike Diehl wrote: > > > Hi all, > > > > I'm upgrading to Asterisk 13.14.0 x86_64. During my beta testing, I've > > discovered that my server crashes as soon as I leave a